Hello,
I'm trying to use a Froggit WH4000SE in combination with a raspberry pi 3+ and weewx to intercept data over WiFi. The raspberry pi is configured as access-point, running weewx 4.2.0 and the interceptor driver to accept ecowit-protocoll messages on 192.168.30.1:8000. The Froggit station (192.168.30.19) is configured to send data to this address and port using WS View. Now to the problem itself: When the raspberry pi is connected over Ethernet (and traffic is sent trough), the weather station and weewx work as intended. The corresponding POST messages are sent and data is processed. However when the raspberry pi is not connected over Ethernet, weewx is only receiving empty queues. After some traffic analysis, I suppose that there is some kind of handshake or perquisite to be done before the station provides corresponding data after a restart. It becomes apparent that a TCP request to 47.102.253.116:80 (rtpdate.ecowitt.com) is done repeatedly and also different calls to ntp servers from baidu, google and amazon. Is there some driver for weewx that can emulate such a handshake locally or is there another way to get the station to send weather data? Best regards, Max -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2adbc7d0-220a-4b9b-a2a8-a4ea528f2648n%40googlegroups.com.
