Take a look here: https://groups.google.com/g/weewx-user/c/udZCCCJlNE8/m/LeR2Mp3iBQAJ
On Sunday, March 14, 2021 at 11:08:24 AM UTC-4 [email protected] wrote: > I have developed a simple Raspberry Pi based weather station using the > BME280 temperature, pressure, humidity sensor and a Davis anemometer and > wind vane. I have written a short programme in Python3 which takes in the > raw sensor values, does some calculations, prints the current measurements > from each sensor and stores mean and max values of windspeed and average > values for wind direction as a record in a LibreOffice spreadsheet at 5 > minute archive intervals. > > I now want to expand this to take advantage of the functionality of Weewx. > I've read much of the guidance in the Weewx wiki, but am still not clear > on the best approach. So, I'd be keen to hear from anyone who has already > done this. In particular, my questions are: > > How much of the above functionality in my current python software would > Weewx replace? > Is there a step-by-step guide available for writing a Weewx driver for a > home-made station? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/004540de-362a-43d4-ba67-296fc6862155n%40googlegroups.com.
