This (attached) is the file with passwords, ids and coordinates removed. Here's what I did:
I stopped weewx on both RPis; copied the database to the new one, having backed up the database there, and then swapped in a copy of my weewx.conf with the uploads to wunderground etc. enabled. When that didn't work I went through and disabled all those. I did check both the weewx.conf files carefully using a split screen file comparison utility and didn't see anything wrong. I then went through and disabled the uploads, as shown here. I reverted to the original database and previous weewx.conf--and weewx ran again, so I assumed the problem was something in the database/configuration. If you can see anything wrong at line 153 I'll be interested to know what it is! And many thanks, of course, for looking. On Wednesday, March 17, 2021 at 8:37:37 PM UTC [email protected] wrote: > You likely have a typo in weewx.conf but without seeing yours it's >> impossible to know where. >> > > In this case, we do know where: line 153 in weewx.conf. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/451deb4d-665a-40fc-ad2b-f1a801bdc7e7n%40googlegroups.com.
# WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2020 Tom Keffer <[email protected]> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 0 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 4.4.0 loop_on_init = 1 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "Test" # Latitude in decimal degrees. Negative for southern hemisphere latitude = 90.0 # Longitude in decimal degrees. Negative for western hemisphere. longitude = 0.0 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 10, meter # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = GW1000 # If you have a website, you may specify an URL #station_url = https://www.example.com #* station_url = https://www.wunderground.com/personal-weather-station/dashboard?ID=XXXXXX # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## # Options for 'GW1000' [GW1000] driver = user.gw1000 ip_address = 192.168.1.54 port = 45000 poll_interval = 15 ############################################################################## [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default # is to use the present time. #start = 2011-01-01T00:00 # The driver to use: driver = weewx.drivers.simulator ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. # To guard against parsing errors, put the password in quotes. #enable = false #username = replace_me #password = replace_me [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). #enable = false #station = replace_me # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. #enable = false #station = replace_me #password = replace_me [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. #enable = false #station = replace_me #password = replace_me [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. #enable = false #station = replace_me #password = replace_me #station = XXXX #* password = "" # If you plan on using wunderfixer, set the following # to your API key: #api_key = replace_me # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. #rapidfire = False [[WeatherCloud]] # remove user.wcloud.WeatherCloud from [[Services]] if not in use # id = deleted # key = deleted [[Windy]] # Station ID ID: deleted # api_key = deleted ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT # HTML_ROOT = /var/www/html/weewx HTML_ROOT = /var/www/domain.tld # The database binding indicates which data should be used in reports. data_binding = wx_binding # Whether to log a successful operation log_success = True # Whether to log an unsuccessful operation log_failure = True # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = false [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = false HTML_ROOT = /var/www/domain.tld/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = /var/www/domain.tld/mobile [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. # skin = Standard skin = Seasons enable = true HTML_ROOT = /var/www/domain.tld [[StackedWindRose]] skin = StackedWindRose [[[Units]]] [[[[Groups]]]] group_speed = km_per_hour [[[[Labels]]]] km_per_hour = km/h knot = knots meter_per_second = m/s mile_per_hour = mph [[[Labels]]] compass_points = N, S, E, W [[[[Generic]]]] windGust = Gust Speed windSpeed = Wind Speed [[[StackedWindRoseImageGenerator]]] image_background_image = None image_width = 382 image_height = 361 image_background_circle_color = 0xF5F5F5 image_background_box_color = 0xF5C696 image_background_range_ring_color = 0xC3D9DD windrose_plot_border = 5 windrose_legend_bar_width = 10 windrose_font_path = /usr/share/fonts/truetype/freefont/FreeSansBold.ttf windrose_plot_font_size = 10 windrose_plot_font_color = 0x000000 windrose_legend_font_size = 10 windrose_legend_font_color = 0x000000 windrose_label_font_size = 12 windrose_label_font_color = 0x000000 windrose_plot_petal_colors = aqua, 0xFF9900, 0xFF3300, 0x009900, 0x00CC00, 0x33FF33, 0x00FFCC windrose_plot_petal_width = 16 [[[[day_images]]]] time_length = 86400 [[[[[daywindrose]]]]] format = png [[[[[[windSpeed]]]]]] label = 24 Hour Wind Rose time_stamp = %H:%M %-d %b %y time_stamp_location = bottom, right [[[[week_images]]]] time_length = 604800 [[[[[weekwindrose]]]]] format = png [[[[[[windSpeed]]]]]] label = Week Wind Rose time_stamp = %H:%M %-d %b %y time_stamp_location = bottom, right [[[[month_images]]]] time_length = 18398016 [[[[[monthwindrose]]]]] format = png [[[[[[windSpeed]]]]]] label = Month Wind Rose time_stamp = %H:%M %-d %b %y time_stamp_location = bottom, right [[[[year_images]]]] time_length = 220776192 [[[[[yearwindrose]]]]] format = png [[[[[[windSpeed]]]]]] label = Year Wind Rose time_stamp = %H:%M %-d %b %y time_stamp_location = bottom, right [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, set "enable" to "true", then # fill out the next four lines. # Use quotes around passwords to guard against parsing errors. enable = false user = replace_me password = replace_me server = replace_me # The ftp server name, e.g, www.myserver.org path = replace_me # The destination directory, e.g., /weather # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs to the user account on the remote machine where the files # will be copied. # # If you wish to use rsync, set "enable" to "true", then # fill out server, user, and path. # The server should appear in your .ssh/config file. # The user is the username used in the identity file. # The path is the destination directory, such as /var/www/html/weather. # Be sure that the user has write permissions on the destination! enable = false server = replace_me user = replace_me path = replace_me # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 #### # Various options for customizing your reports. [[Defaults]] [[[Units]]] # The following section sets what unit to use for each unit group. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' [[[[Groups]]]] group_altitude = meter # Options are 'foot' or 'meter' group_degree_day = degree_C_day # Options are 'degree_F_day' or 'degree_C_day' group_distance = km # Options are 'mile' or 'km' groups_luminosity = lux group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', 'hPa', or 'kPa' group_rain = mm # Options are 'inch', 'cm', or 'mm' group_rainrate = cm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = km_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = km_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_C # Options are 'degree_F' or 'degree_C' # The following section sets the formatting for each type of unit. [[[[StringFormats]]]] centibar = %.0f cm = %.2f cm_per_hour = %.2f degree_C = %.1f degree_F = %.1f degree_compass = %.0f foot = %.0f hPa = %.1f hour = %.1f inHg = %.3f inch = %.2f inch_per_hour = %.2f km = %.1f km_per_hour = %.0f km_per_hour2 = %.1f knot = %.0f knot2 = %.1f kPa = %.2f lux = %.0f mbar = %.1f meter = %.0f meter_per_second = %.1f meter_per_second2 = %.1f mile = %.1f mile_per_hour = %.0f mile_per_hour2 = %.1f mm = %.1f mmHg = %.1f mm_per_hour = %.1f percent = %.0f second = %.0f uv_index = %.1f volt = %.1f watt_per_meter_squared = %.0f NONE = " N/A" # The following section overrides the label used for each type of unit [[[[Labels]]]] meter = " meter", " meters" # You may prefer "metre". day = " day", " days" hour = " hour", " hours" minute = " minute", " minutes" second = " second", " seconds" lux = " lux" NONE = "" # The following section sets the format for each time scale. # The values below will work in every locale, but they may not look # particularly attractive. [[[[TimeFormats]]]] hour = %H:%M day = %X week = %X (%A) month = %x %X year = %x %X rainyear = %x %X current = %x %X ephem_day = %X ephem_year = %x %X [[[[Ordinates]]]] # Ordinal directions. The last one is for no wind direction directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A # The following section sets the base temperatures used for the # calculation of heating, cooling, and growing degree-days. [[[[DegreeDays]]]] # Base temperature for heating days, with unit: heating_base = 65, degree_F # Base temperature for cooling days, with unit: cooling_base = 65, degree_F # Base temperature for growing days, with unit: growing_base = 50, degree_F # A trend takes a difference across a time period. The following # section sets the time period, and how big an error is allowed to # still be counted as the start or end of a period. [[[[Trend]]]] time_delta = 10800 # 3 hours time_grace = 300 # 5 minutes # The labels to be used for each observation type [[[Labels]]] # Set to hemisphere abbreviations suitable for your location: hemispheres = N, S, E, W # Formats to be used for latitude whole degrees, longitude whole # degrees, and minutes: latlon_formats = %02d, %03d, %05.2f # Generic labels, keyed by an observation type. [[[[Generic]]]] barometer = Barometer dewpoint = Dew Point ET = ET heatindex = Heat Index inHumidity = Inside Humidity inTemp = Inside Temperature luminosity = Brightness outHumidity = Humidity outTemp = Outside Temperature radiation = Solar Radiation rain = Rain rainRate = Rain Rate UV = UV Index windDir = Wind Direction windGust = Gust Speed windGustDir = Gust Direction windSpeed = Wind Speed windchill = Wind Chill windgustvec = Gust Vector windvec = Wind Vector extraTemp1 = Basement extraTemp2 = Attic extraTemp3 = Chickens # Sensor status indicators rxCheckPercent = Signal Quality txBatteryStatus = Transmitter Battery windBatteryStatus = Wind Battery rainBatteryStatus = Rain Battery outTempBatteryStatus = Outside Temperature Battery inTempBatteryStatus = Inside Temperature Battery consBatteryVoltage = Console Battery heatingVoltage = Heating Battery supplyVoltage = Supply Voltage referenceVoltage = Reference Voltage [[[Almanac]]] # The labels to be used for the phases of the moon: moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 # see https://github.com/gjr80/weewx-gw1000/wiki/Understanding-GW1000-radiation-fields radiation = luminosity/126.7 if luminosity is not None else None ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg pressure = 24, 34.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour rain = 0, 60, inch # rain changed from 10 to 60 ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # How to calculate derived quantities. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware altimeter = prefer_hardware appTemp = prefer_hardware barometer = prefer_hardware cloudbase = prefer_hardware dewpoint = prefer_hardware ET = prefer_hardware heatindex = prefer_hardware humidex = prefer_hardware inDewpoint = prefer_hardware maxSolarRad = prefer_hardware rainRate = prefer_hardware windchill = prefer_hardware windrun = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = software # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.manager.DaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview_extended.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_name = weewx.sdb database_type = SQLite # MySQL [[archive_mysql]] database_name = weewx database_type = MySQL ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password for the user name (quotes guard against parsing errors) password = weewx ############################################################################## # This section configures the internal weewx engine. [Engine] # The following section specifies which services should be run and in what order. [[Services]] prep_services = weewx.engine.StdTimeSynch data_services = user.gw1000.Gw1000Service process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS # restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.wcloud.WeatherCloud, user.windy.Windy report_services = weewx.engine.StdPrint, weewx.engine.StdReport ############################################################################## ############################################################################## # Options for extension 'GW1000' [Accumulator] [[daymaxwind]] extractor = last [[lightning_distance]] extractor = last [[lightning_strike_count]] extractor = sum [[lightning_last_det_time]] extractor = last [[stormRain]] extractor = last [[hourRain]] extractor = last [[dayRain]] extractor = last [[weekRain]] extractor = last [[monthRain]] extractor = last [[yearRain]] extractor = last [[totalRain]] extractor = last [[pm2_51_24hav]] extractor = last [[pm2_52_24hav]] extractor = last [[pm2_53_24hav]] extractor = last [[pm2_54_24hav]] extractor = last [[wh40_batt]] extractor = last [[wh26_batt]] extractor = last [[wh25_batt]] extractor = last [[wh65_batt]] extractor = last [[wh31_ch1_batt]] extractor = last [[wh31_ch2_batt]] extractor = last [[wh31_ch3_batt]] extractor = last [[wh31_ch4_batt]] extractor = last [[wh31_ch5_batt]] extractor = last [[wh31_ch6_batt]] extractor = last [[wh31_ch7_batt]] extractor = last [[wh31_ch8_batt]] extractor = last [[wh41_ch1_batt]] extractor = last [[wh41_ch2_batt]] extractor = last [[wh41_ch3_batt]] extractor = last [[wh41_ch4_batt]] extractor = last [[wh51_ch1_batt]] extractor = last [[wh51_ch2_batt]] extractor = last [[wh51_ch3_batt]] extractor = last [[wh51_ch4_batt]] extractor = last [[wh51_ch5_batt]] extractor = last [[wh51_ch6_batt]] extractor = last [[wh51_ch7_batt]] extractor = last [[wh51_ch8_batt]] extractor = last [[wh51_ch9_batt]] extractor = last [[wh51_ch10_batt]] extractor = last [[wh51_ch11_batt]] extractor = last [[wh51_ch12_batt]] extractor = last [[wh51_ch13_batt]] extractor = last [[wh51_ch14_batt]] extractor = last [[wh51_ch15_batt]] extractor = last [[wh51_ch16_batt]] extractor = last [[wh55_ch1_batt]] extractor = last [[wh55_ch2_batt]] extractor = last [[wh55_ch3_batt]] extractor = last [[wh55_ch4_batt]] extractor = last [[wh57_batt]] extractor = last [[wh68_batt]] extractor = last [[ws80_batt]] extractor = last [[24havpm251]] extractor = last [[24havpm252]] extractor = last [[24havpm253]] extractor = last [[24havpm254]] extractor = last [[pm2_51_24h_avg]] extractor = last [[pm2_52_24h_avg]] extractor = last [[pm2_53_24h_avg]] extractor = last [[pm2_54_24h_avg]] extractor = last [[pm2_55_24h_avg]] extractor = last [[pm10_24h_avg]] extractor = last [[co2_24h_avg]] extractor = last [[wh45_batt]] extractor = last [[wh40_sig]] extractor = last [[wh26_sig]] extractor = last [[wh25_sig]] extractor = last [[wh65_sig]] extractor = last [[wh31_ch1_sig]] extractor = last [[wh31_ch2_sig]] extractor = last [[wh31_ch3_sig]] extractor = last [[wh31_ch4_sig]] extractor = last [[wh31_ch5_sig]] extractor = last [[wh31_ch6_sig]] extractor = last [[wh31_ch7_sig]] extractor = last [[wh31_ch8_sig]] extractor = last [[wh41_ch1_sig]] extractor = last [[wh41_ch2_sig]] extractor = last [[wh41_ch3_sig]] extractor = last [[wh41_ch4_sig]] extractor = last [[wh45_sig]] extractor = last [[wh51_ch1_sig]] extractor = last [[wh51_ch2_sig]] extractor = last [[wh51_ch3_sig]] extractor = last [[wh51_ch4_sig]] extractor = last [[wh51_ch5_sig]] extractor = last [[wh51_ch6_sig]] extractor = last [[wh51_ch7_sig]] extractor = last [[wh51_ch8_sig]] extractor = last [[wh51_ch9_sig]] extractor = last [[wh51_ch10_sig]] extractor = last [[wh51_ch11_sig]] extractor = last [[wh51_ch12_sig]] extractor = last [[wh51_ch13_sig]] extractor = last [[wh51_ch14_sig]] extractor = last [[wh51_ch15_sig]] extractor = last [[wh51_ch16_sig]] extractor = last [[wh55_ch1_sig]] extractor = last [[wh55_ch2_sig]] extractor = last [[wh55_ch3_sig]] extractor = last [[wh55_ch4_sig]] extractor = last [[wh57_sig]] extractor = last [[wh68_sig]] extractor = last [[ws80_sig]] extractor = last
