I have released v0.3.0 on GitHub <https://github.com/gjr80/weewx-gw1000/releases/tag/v0.3.0>.
This release: - includes support for the yet to be released WH35 leaf wetness sensor. If you have a WH35 sensor and it has been linked to your GW1000 v0.3.0 of the driver should automatically pick up and emit the WH35 sensor data. - fixes the loss of battery state data for some sensors that occurred under GW1000 firmware release v1.6.5 and later. - includes the --units command line option to allow the output of --live-data to be displayed in specified units (US customary or Metric) when running the driver directly Various other minor changes are covered in the release notes at the link above. Those that installed a previous version via wee_extension can upgrade to v0.3.0 as follows: $ wget -P /var/tmp https://github.com/gjr80/weewx-gw1000/releases/download/v0.3.0/gw1000-0.3.0.tar.gz <https://github.com/gjr80/weewx-gw1000/releases/download/v0.2.0/gw1000-0.2.0.tar.gz> $ wee_extension --install=/var/tmp/gw1000-0.3.0.tar.gz Note: wee_extension may require the use of sudo and the path to wee_extension as applicable. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0de54bc6-853b-4899-be8a-006a285eba7fn%40googlegroups.com.
