For forecast in WeeWX 4.x, you should have better luck installing: https://github.com/chaunceygardiner/weewx-forecast
> On Mar 22, 2021, at 1:18 PM, [email protected] <[email protected]> > wrote: > > > I have two problems that I may have caused myself (noob). I have had weewx > running fine on my raspberry pi for several years. After updating weewx to V > 4.4 and changing the forecast extension from NWS to Aeris for forecast both > problems showed up. My station type is SDR. > > First problem: > Years ago when I first set up the SDR driver I was able to suppress all the > SDR data in the log so they didn't clutter the log.....I can't remember what > i did. > > The second problem: > More serious than the first is an error in the Forecast extension that stops > the thread. > unexpected keyword argument 'log_level' > Because I have a hard time understanding python I dont understand how to fix > things and need some help. > > As far as I can tell weewx is working fine and the error is confined to the > forecast extension. Thank you in advance for any insight you can give. > > my log: > > Mar 22 13:05:11 raspberrypi weewxd: sdr: MainThread: packet={u'extraHumid2': > 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, 'usUnits': 16, > 'dateTime': 1616439908} > Mar 22 13:05:11 raspberrypi weewxd: sdr: MainThread: ignoring duplicate > packet {u'extraHumid2': 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, > 'usUnits': 16, 'dateTime': 1616439908} > Mar 22 13:05:11 raspberrypi weewxd: sdr: MainThread: ignoring duplicate > packet {u'extraHumid2': 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, > 'usUnits': 16, 'dateTime': 1616439908} > Mar 22 13:05:15 raspberrypi weewxd: sdr: MainThread: lines=['{"time" : > "2021-03-22 19:05:12", "model" : "Acurite 5n1 sensor", "sensor_id" : 1323, > "channel" : "A", "sequence_num" : 0, "battery" : "OK", "message_type" : 56, > "wind_speed" : 1.650, "temperature_F" : 45.300, "humidity" : 63}\n', '{"time" > : "2021-03-22 19:05:12", "model" : "Acurite 5n1 sensor", "sensor_id" : 1323, > "channel" : "A", "sequence_num" : 1, "battery" : "OK", "message_type" : 56, > "wind_speed" : 1.650, "temperature_F" : 45.300, "humidity" : 63}\n', '{"time" > : "2021-03-22 19:05:12", "model" : "Acurite 5n1 sensor", "sensor_id" : 1323, > "channel" : "A", "sequence_num" : 2, "battery" : "OK", "message_type" : 56, > "wind_speed" : 1.650, "temperature_F" : 45.300, "humidity" : 63}\n'] > Mar 22 13:05:15 raspberrypi weewxd: sdr: MainThread: packet={u'outHumidity': > 63.0, u'outTempBatteryStatus': 0, 'dateTime': 1616439912, u'outTemp': 45.3, > u'windSpeed': 1.65, 'usUnits': 1} > Mar 22 13:05:15 raspberrypi weewxd: sdr: MainThread: packet={u'outHumidity': > 63.0, u'outTempBatteryStatus': 0, 'dateTime': 1616439912, u'outTemp': 45.3, > u'windSpeed': 1.65, 'usUnits': 1} > Mar 22 13:05:15 raspberrypi weewxd: sdr: MainThread: packet={u'outHumidity': > 63.0, u'outTempBatteryStatus': 0, 'dateTime': 1616439912, u'outTemp': 45.3, > u'windSpeed': 1.65, 'usUnits': 1} > Mar 22 13:05:18 raspberrypi weewxd: sdr: MainThread: lines=[] > Mar 22 13:05:22 raspberrypi weewxd: sdr: MainThread: lines=['{"time" : > "2021-03-22 19:05:19", "model" : "Acurite tower sensor", "id" : 11823, > "channel" : "C", "temperature_C" : 20.500, "humidity" : 25, "battery" : 0, > "status" : 68}\n', '{"time" : "2021-03-22 19:05:19", "model" : "Acurite tower > sensor", "id" : 11823, "channel" : "C", "temperature_C" : 20.500, "humidity" > : 25, "battery" : 0, "status" : 68}\n', '{"time" : "2021-03-22 19:05:19", > "model" : "Acurite tower sensor", "id" : 11823, "channel" : "C", > "temperature_C" : 20.500, "humidity" : 25, "battery" : 0, "status" : 68}\n'] > Mar 22 13:05:22 raspberrypi weewxd: sdr: MainThread: packet={'dateTime': > 1616439919, u'inHumidity': 25.0, u'inTemp': 20.5, 'usUnits': 16, > u'inTempBatteryStatus': 0} > Mar 22 13:05:22 raspberrypi weewx[1769] INFO weewx.manager: Added record > 2021-03-22 13:05:00 MDT (1616439900) to database 'weewx.sdb' > Mar 22 13:05:22 raspberrypi weewx[1769] INFO weewx.manager: Added record > 2021-03-22 13:05:00 MDT (1616439900) to daily summary in 'weewx.sdb' > Mar 22 13:05:22 raspberrypi weewxd: forecast: MainThread: Zambretti: starting > thread > Mar 22 13:05:22 raspberrypi weewxd: forecast: ZambrettiThread: Zambretti: > forecast was already calculated for 2021-03-22 09:00:00 MDT (1616425200) > Mar 22 13:05:22 raspberrypi weewxd: forecast: ZambrettiThread: Zambretti: > terminating thread > Mar 22 13:05:22 raspberrypi weewxd: forecast: MainThread: Aeris: starting > thread > Mar 22 13:05:22 raspberrypi weewxd: forecast: AerisThread: Aeris: download > forecast from > 'http://api.aerisapi.com/forecasts/closest?client_id=XXXXXXXXXXXXXXXXX3Da0&client_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXQ5nw&p=39.5468333,-104.978&filter=1hr' > Mar 22 13:05:22 raspberrypi weewx[1769] INFO weewx.restx: PWSWeather: > Published record 2021-03-22 13:05:00 MDT (1616439900) > Mar 22 13:05:22 raspberrypi weewxd: forecast: AerisThread: Aeris: got 24 > forecast records > Mar 22 13:05:22 raspberrypi weewxd: forecast: AerisThread: Aeris: saving 24 > forecast records > Mar 22 13:05:22 raspberrypi weewxd: forecast: AerisThread: Aeris: forecast > failure: addRecord() got an unexpected keyword argument 'log_level' > Mar 22 13:05:22 raspberrypi weewxd: forecast: AerisThread: Aeris: terminating > thread > Mar 22 13:05:22 raspberrypi weewx[1769] INFO weewx.restx: Wunderground-PWS: > Published record 2021-03-22 13:05:00 MDT (1616439900) > Mar 22 13:05:24 raspberrypi weewx[1769] INFO weewx.cheetahgenerator: > Generated 20 files for report StandardReport in 2.26 seconds > Mar 22 13:05:25 raspberrypi weewx[1769] INFO weewx.imagegenerator: Generated > 12 images for report StandardReport in 1.04 seconds > Mar 22 13:05:25 raspberrypi weewx[1769] INFO weewx.reportengine: Copied 0 > files to /var/www/html/weewx > Mar 22 13:05:27 raspberrypi weewxd: sdr: MainThread: lines=['{"time" : > "2021-03-22 19:05:24", "model" : "Acurite tower sensor", "id" : 6771, > "channel" : "B", "temperature_C" : 21.500, "humidity" : 33, "battery" : 0, > "status" : 68}\n', '{"time" : "2021-03-22 19:05:24", "model" : "Acurite tower > sensor", "id" : 6771, "channel" : "B", "temperature_C" : 21.500, "humidity" : > 33, "battery" : 0, "status" : 68}\n', '{"time" : "2021-03-22 19:05:24", > "model" : "Acurite tower sensor", "id" : 6771, "channel" : "B", > "temperature_C" : 21.500, "humidity" : 33, "battery" : 0, "status" : 68}\n'] > Mar 22 13:05:27 raspberrypi weewxd: sdr: MainThread: packet={u'extraHumid2': > 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, 'usUnits': 16, > 'dateTime': 1616439924} > Mar 22 13:05:27 raspberrypi weewxd: sdr: MainThread: ignoring duplicate > packet {u'extraHumid2': 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, > 'usUnits': 16, 'dateTime': 1616439924} > Mar 22 13:05:27 raspberrypi weewxd: sdr: MainThread: ignoring duplicate > packet {u'extraHumid2': 33.0, u'extraTemp2': 21.5, u'txTempBatteryStatus': 0, > 'usUnits': 16, 'dateTime': 1616439924} > > My conf. > > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2015 Tom Keffer <[email protected]> > # See the file LICENSE.txt for your rights. > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 0 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # Whether to log successful operations > log_success = True > > # Whether to log unsuccessful operations > log_failure = True > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 4.4.0 > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = Kimble Backyard PWS > > # Latitude and longitude in decimal degrees > latitude = 39.5468333 > longitude = -104.978 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 5745, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be used. > station_type = SDR > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > ############################################################################## > > [Simulator] > # This section is for the weewx weather station simulator > > # The time (in seconds) between LOOP packets. > loop_interval = 2.5 > > # The simulator mode can be either 'simulator' or 'generator'. > # Real-time simulator. Sleep between each LOOP packet. > mode = simulator > # Generator. Emit LOOP packets as fast as possible (useful for testing). > #mode = generator > > # The start time. If not specified, the default is to use the present > time. > #start = 2011-01-01 00:00 > > # The driver to use: > driver = weewx.drivers.simulator > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = false > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to do this, set the option 'enable' to true, > # and specify a username and password. > enable = false > username = replace_me > # To guard against parsing errors, put your password in quotes: > password = replace_me > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to do this, set the option 'enable' to true, > # and specify the station ID (e.g., CW1234). > enable = false > station = replace_me > > # If this is an APRS (radio amateur) station, uncomment > # the following and replace with a passcode (e.g., 12345). > #passcode = replace_me (APRS stations only) > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > enable = true > station = KCOLITTL27 > # To guard against parsing errors, put your password in quotes: > password = xxxxxxxxx > > [[WOW]] > # This section is for configuring posts to WOW. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > enable = false > station = replace_me > # To guard against parsing errors, put your password in quotes: > password = replace_me > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > enable = true > station = KCOLITTL270 > # To guard against parsing errors, put your password in quotes: > password = xxxxxxxx > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = false > > # If you plan on using wunderfixer, set the following > # to your API key: > api_key = replace_me > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = /etc/weewx/skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = /var/www/html/weewx > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > #### > > # Each of the following subsections defines a report that will be run. > # See the customizing guide to change the units, plot types and line > # colors, modify the fonts, display additional sensor data, and other > # customizations. Many of those changes can be made here by overriding > # parameters, or by modifying templates within the skin itself. > > [[StandardReport]] > # See the customizing guide to change the units, plot types and line > # colors, modify the fonts, display additional sensor data, and other > # customizations. Many of those changes can be made here by overriding > # parameters, or by modifying templates within the skin itself. > > # The StandardReport uses the 'Standard' skin, which contains the > # images, templates and plots for the report. > skin = Standard > enable = True > [[[Units]]] > [[[[Groups]]]] > group_altitude = foot > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > > [[SeasonsReport]] > # The SeasonsReport uses the 'Seasons' skin, which contains the > # images, templates and plots for the report. > skin = Seasons > enable = false > > [[SmartphoneReport]] > # The SmartphoneReport uses the 'Smartphone' skin, and the images and > # files are placed in a dedicated subdirectory. > skin = Smartphone > enable = false > HTML_ROOT = public_html/smartphone > > [[MobileReport]] > # The MobileReport uses the 'Mobile' skin, and the images and files > # are placed in a dedicated subdirectory. > skin = Mobile > enable = false > HTML_ROOT = public_html/mobile > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, uncomment and fill out the next four lines. > # user = craigk > # password = hat.777 > # server = ftp.powweb.com > # path = /htdocs/weather/ > > # Set to True for an FTP over TLS (FTPS) connection. Not all servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh using > # public/private key authentication from the user account that weewx > # runs as to the user account on the remote machine where the files > # will be copied. > # > # The following three lines determine where files will be sent. > #server = replace with the rsync server name, e.g, www.threefools.org > #path = replace with the rsync destination directory (e.g., /weather) > #user = replace with the rsync username > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you > # make a mistake in the remote path, you could could unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > #### > > # Various options for customizing your reports. > > [[Defaults]] > > # The following section determines the selection and formatting of > units. > [[[Units]]] > > # The following section sets what unit to use for each unit group. > # NB: The unit is always in the singular. I.e., 'mile_per_hour', > # NOT 'miles_per_hour' > [[[[Groups]]]] > > group_altitude = foot # Options are 'foot' or 'meter' > group_degree_day = degree_F_day # Options are > 'degree_F_day' or 'degree_C_day' > group_distance = mile # Options are 'mile' or 'km' > group_pressure = inHg # Options are 'inHg', 'mmHg', > 'mbar', or 'hPa' > group_rain = inch # Options are 'inch', 'cm', or 'mm' > group_rainrate = inch_per_hour # Options are > 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' > group_speed = mile_per_hour # Options are 'mile_per_hour', > 'km_per_hour', 'knot', or 'meter_per_second' > group_speed2 = mile_per_hour2 # Options are > 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' > group_temperature = degree_F # Options are 'degree_F' or > 'degree_C' > > > # The following section sets the formatting for each type of unit. > [[[[StringFormats]]]] > > centibar = %.0f > cm = %.2f > cm_per_hour = %.2f > degree_C = %.1f > degree_F = %.1f > degree_compass = %.0f > foot = %.0f > hPa = %.1f > hour = %.1f > inHg = %.3f > inch = %.2f > inch_per_hour = %.2f > km_per_hour = %.0f > km_per_hour2 = %.1f > knot = %.0f > knot2 = %.1f > mbar = %.1f > meter = %.0f > meter_per_second = %.1f > meter_per_second2 = %.1f > mile_per_hour = %.0f > mile_per_hour2 = %.1f > mm = %.1f > mmHg = %.1f > mm_per_hour = %.1f > percent = %.0f > second = %.0f > uv_index = %.1f > volt = %.1f > watt_per_meter_squared = %.0f > NONE = " N/A" > > # The following section sets the label to be used for each type > of unit > [[[[Labels]]]] > > day = " day", " days" > hour = " hour", " hours" > minute = " minute", " minutes" > second = " second", " seconds" > NONE = "" > > # The following section sets the format to be used for each time > scale. > # The values below will work in every locale, but they may not > look > # particularly attractive. See the Customization Guide for > alternatives. > [[[[TimeFormats]]]] > > hour = %H:%M > day = %X > week = %X (%A) > month = %x %X > year = %x %X > rainyear = %x %X > current = %x %X > ephem_day = %X > ephem_year = %x %X > > [[[[Ordinates]]]] > > # Ordinal directions. The last one should be for no wind > direction > directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, > WSW, W, WNW, NW, NNW, N/A > > # The following section sets the base temperatures used for the > # calculation of heating and cooling degree-days. > [[[[DegreeDays]]]] > > # Base temperature for heating days, with unit: > heating_base = 65, degree_F > # Base temperature for cooling days, with unit: > cooling_base = 65, degree_F > # Base temperature for growing days, with unit: > growing_base = 50.0, degree_F > > # A trend takes a difference across a time period. The following > # section sets the time period, and how big an error is allowed to > # still be counted as the start or end of a period. > [[[[Trend]]]] > > time_delta = 10800 # 3 hours > time_grace = 300 # 5 minutes > > # The labels to be used for each observation type > [[[Labels]]] > > # Set to hemisphere abbreviations suitable for your location: > hemispheres = N, S, E, W > > # Formats to be used for latitude whole degrees, longitude whole > # degrees, and minutes: > latlon_formats = %02d, %03d, %05.2f > > # Generic labels, keyed by an observation type. > [[[[Generic]]]] > barometer = Barometer > dewpoint = Dew Point > ET = ET > heatindex = Heat Index > inHumidity = Inside Humidity > inTemp = Bedroom Temp > outHumidity = Humidity > outTemp = Outside Temperature > radiation = Radiation > rain = Rain > rainRate = Rain Rate > UV = UV Index > windDir = Wind Direction > windGust = Gust Speed > windGustDir = Gust Direction > windSpeed = Wind Speed > windchill = Wind Chill > windgustvec = Gust Vector > windvec = Wind Vector > extraTemp1 = Loft Temp > extraTemp2 = Kitchen Temp > extraTemp3 = Temperature3 > > # Sensor status indicators > > rxCheckPercent = Signal Quality > txBatteryStatus = Transmitter Battery > windBatteryStatus = Wind Battery > rainBatteryStatus = Rain Battery > outTempBatteryStatus = Outside Temperature Battery > inTempBatteryStatus = Inside Temperature Battery > consBatteryVoltage = Console Battery > heatingVoltage = Heating Battery > supplyVoltage = Supply Voltage > referenceVoltage = Reference Voltage > > [[[Almanac]]] > > # The labels to be used for the phases of the moon: > moon_phases = New, Waxing crescent, First quarter, Waxing > gibbous, Full, Waning gibbous, Last quarter, Waning crescent > > ############################################################################## > > > # This service acts as a filter, converting the unit system coming from > # the hardware to a unit system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > # outTemp = outTemp - 1 > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > windGust = 0, 120, mile_per_hour > pressure = 24, 34.5, inHg > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > > [[Calculations]] > # Derived quantities are calculated by this service. Possible values > are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > barometer = prefer_hardware > altimeter = prefer_hardware > windchill = prefer_hardware > heatindex = prefer_hardware > dewpoint = prefer_hardware > inDewpoint = prefer_hardware > rainRate = prefer_hardware > maxSolarRad = prefer_hardware > cloudbase = prefer_hardware > humidex = prefer_hardware > appTemp = prefer_hardware > ET = prefer_hardware > windrun = prefer_hardware > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive interval > # will be downloaded from the station. Otherwise, specify it (in seconds). > archive_interval = 300 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics > loop_hilo = True > > # The data binding used to save archive records > data_binding = wx_binding > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_sqlite > # The name of the table within the database > table_name = archive > # The manager handles aggregation of data for historical summaries > manager = weewx.wxmanager.WXDaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = schemas.wview.schema > [[forecast_binding]] > database = forecast_sqlite > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file > [[archive_sqlite]] > database_type = SQLite > database_name = weewx.sdb > > # MySQL > [[archive_mysql]] > database_type = MySQL > database_name = weewx > [[forecast_sqlite]] > database_name = forecast.sdb > database_type = SQLite > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases > [[SQLite]] > driver = weedb.sqlite > # Directory in which the database files are located > SQLITE_ROOT = /var/lib/weewx > > # Defaults for MySQL databases > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # The user name for logging in to the host > user = weewx > # The password for the user name. Put in quotes to guard against > parsing errors. > password = weewx > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > # The following section specifies which services should be run and in > what order. > [[Services]] > prep_services = weewx.engine.StdTimeSynch > data_services = user.pond.PondService > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate > xtype_services = weewx.wxxtypes.StdWXXTypes, > weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, > weewx.wxxtypes.StdDelta > archive_services = weewx.engine.StdArchive, > user.forecast.ZambrettiForecast, user.forecast.AerisForecast > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, > weewx.restx.StdWOW, weewx.restx.StdAWEKAS > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > ############################################################################ > > [SDR] > # collect data from Acurite 5n1 sensor 052B and 2E2F Tower > > # The driver to use > driver = user.sdr > cmd = rtl_433 -q -U -F json -R 40 > > [[sensor_map]] > windDir = wind_dir.052B.Acurite5n1Packet > windSpeed = wind_speed.052B.Acurite5n1Packet > outTemp = temperature.052B.Acurite5n1Packet > outHumidity = humidity.052B.Acurite5n1Packet > rain_total = rain_total.052B.Acurite5n1Packet > outTempBatteryStatus = battery.052B.Acurite5n1Packet > inTemp = temperature.2E2F.AcuriteTowerPacket > inHumidity = humidity.2E2F.AcuriteTowerPacket > inTempBatteryStatus = battery.2E2F.AcuriteTowerPacket > extraTemp2 = temperature.1A73.AcuriteTowerPacket > extraHumid2 = humidity.1A73.AcuriteTowerPacket > txTempBatteryStatus = battery.1A73.AcuriteTowerPacket > > ############################################################################## > > # Options for extension 'forecast' > [Forecast] > data_binding = forecast_binding > [[OWM]] > api_key = INSERT_OWM_API_KEY_HERE > [[WWO]] > api_key = INSERT_WWO_API_KEY_HERE > [[WU]] > api_key = INSERT_WU_API_KEY_HERE > [[NWS]] > lid = INSERT_lid_HERE > foid = INSERT_foid_HERE > [[UKMO]] > api_key = INSERT_UKMO_API_KEY_HERE > location = INSERT_UK_LOCATION_HERE > [[XTide]] > location = "INSERT_LOCATION_HERE (e.g., Boston)" > [[Zambretti]] > hemisphere = NORTH > [[Aeris]] > client_secret =xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx > client_id = xxxxxxxxxxxxxxxxxxxxxxxxxxx > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/292d5f0b-2148-410d-b8d3-fe72d7d0e015n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9593254B-98E5-4FA6-9E88-DEC4D83C355B%40johnkline.com.
