So basically if I want to use weewx with davis station and Pi. I'd need: https://www.weathershop.co.uk/shop/brands/davis-instruments/vantage-pro/davis-vantage-pro2-cabled-weather-station plus https://www.weathershop.co.uk/shop/accessories/spares-by-brands/davis-spare-parts-accessories/davis-accessories-upgrades/vantage-pro/davis-6510-weatherlink-serial
This should be a reliable problem free setup? Think unfortunately there is very little choice of weather station if you want something that's going to last and you can get spares for. Thanks for the advice. On Saturday, 10 April 2021 at 16:23:34 UTC+1 Greg Troxel wrote: > > Chris Thompstone <[email protected]> writes: > > > [davis query] > > > I like a wired station setup, due to reliability/simplicity and it must > > work with weewx reliably. (no periodic fiddling or messing) > > So was thinking a vantage pro2 wired with a serial interface to connect > to > > my Pi. > > > > To be honest not interested in the console as I generally never look at > > them. Can't see the point when I can use the weewx on my phone or PC. If > > I had my way there would be a blank box with serial socket to connect > the > > Pi to, plus power, nothing more. > > > > But I guess I have to have that anyway, but does the console have the > > serial connection on it to get to the Pi? How do I go from my serial USB > > cable on my Pi to the Davis? Do I have to buy something else? > > > > Not interested in any of the Davis logging stuff, just want the raw data > > flowing into weewx on a Pi, nothing more. > > Here's one solution: > > Davis Vantage Pro wired > ISS outside > console inside > > Davis serial datalogger #6510SER > plugged into console > > the datalogger has a DB9 and plugs into a usb/serial adaptor (or an > actual serial port). I'm using an prolific adaptor > > weewx configured to talk to the USB serial port > > system that is running weewx has a battery-backed RTC so it knows the > data when it boots. A workaround is scripts to not start weewx until > the computer is affirmatively synchronized with NTP. > > For me, this setup has been reliable. > > You said you weren't interested in some things but I wanted to point > out: > > My VP2 is wireless. I have had zero trouble with the wireless part. > I have had to replace the CR123 in the ISS maybe a few times in 10 > years. I had a VP(non-2) and that wireless worked, but I think the > supercap failed and it's on my list to fix. However, I am not sure if > the wired option provides power to the ISS, or if it's just the data > link. I don't mean to suggest you are wrong to do wired, just that I > went wireless because wires were awkward and it has been ok. > > The pressure sensor is in the console, as is indoor temp/humidity. > The ISS only has wind/rain and outside temp/humidity. So even if you > don't look at the console, without it you will not have pressure/temp. > > There is a "weather envoy" which I think still needs a datalogger to > plug in which is more or less a console without a display but I'm not > sure about pressure. I have neer seen one or used it. > > You can get a VP2+ with solar radiation and UV sensors on the ISS, or > you can add them later. > > There are third-party loggers and interfaces. I decided to just pay > for the davis one even though it costs double the third-party ones, > because I was confident I would have no trouble. I have nothing bad > to say about the third-party stuff -- I just haven't tried it. There > are some that have datalogging and some that don't. > > You said you were not interested in logging, just raw data to Pi, but > I think that's a mistake. The davis logger records data every 5 > minutes (hardware archive interval, configurable) and will do so on > the 3 D cell batteries in the console for multiple days during a power > failure. When the weewx computer starts up it will get the old > archive records and put them in the weewx database. This has happened > to me mulitple times and worked very well. So I have continuous data > over several storms where I would have had a gap. If your RPI is on a > UPS/generator that can go 2 weeks AND if it is *never* down for more > than 5 minutes even when you have sd card trouble or upgrade trouble > then you don't need the logger. As you can guess I don't believe > this. If you really don't mind losing data, then yes you don't need > the logger. > > If you mean you aren't interested in having the equipment send data to > the davis cloud where you have trouble geting it back from, then > agreed :-) > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/790cde1f-b15a-4d61-b261-00e672851414n%40googlegroups.com.
