There is the ' missing at the end of the password line. If that's the same in your original file, that's the problem. Additionally you may want to remove the comments at the end of the lines "server" and "path".
weerman schrieb am Donnerstag, 15. April 2021 um 18:33:38 UTC+2: > > > Hi, > > This is the FTP configuration of my weewx.conf file > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, set "enable" to "true", then > # fill out the next four lines. > # Use quotes around passwords to guard against parsing errors. > enable = true > user = webxxxxxx > password = 'xxxxxxxx > server = webxxxxxx.rex14.flatbooster.com # The ftp server > name, e.g, www.myserver.org > path = /html/weewx # The destination directory, e.g., /weather > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > # support this. > secure_ftp = true > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = public_html > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > > > > [email protected] schrieb am Donnerstag, 15. April 2021 um 16:13:55 UTC+2: > >> I learn from the logs that there is a problem with authentication. Could >> you provide the complete FTP section of weewx.conf? Replace user and >> password by X, only. But do not replace '=' by ':' etc. >> >> weerman schrieb am Donnerstag, 15. April 2021 um 09:03:07 UTC+2: >> >>> Hi, >>> >>> First of all am using weewx in a raspberry Pi 2 environment. When >>> checking my weather data yesterday, i noticed that my raspberry was frozen. >>> So i tried to restart the rp. But with no luck. In the end i had to >>> reinstall raspbian and weewx again and since i only have copy of my >>> database, i also lost track of my configuration in the FTP section. >>> >>> My FTP is like this with any passwords and usernames xed out. >>> >>> User: webXXXXXX (followed by a six digit number) >>> Pass:'XXXXXXXX' >>> Server: rex14.flatbooster.com >>> Path: /html/weewx (there is a leading html folder in my ftp Setup) >>> Secure FTP: true >>> >>> The server adress must be somewhat modified. I had already tried >>> combinations like "ftp.rex14.flatbooster.com" but with no success. >>> >>> But no matter what combination, i always get an error message like this. >>> See also the attached message. >>> >>> Best Records >>> >>> Georg >>> >>> >>> N.B. I am using weewx 4.5.1. right now and also made sure to install the >>> required python files before installing weewx. >>> >>> >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/50a1f71b-8c55-49a1-b92c-2b3c5683299fn%40googlegroups.com.
