Hi, I think you need to take a step back and work through this carefully and methodically. The weewx.conf you posted a couple of posts ago is for a setup.py install, ie WeeWX is installed in /home/weewx. The syslog extract you provided is for a WeeWX install that was installed as a package (ie not installed via setup.py) where weewx.conf is located in /etc/weewx. This makes it impossible to reconcile one against the other (and in this case determine if you have any obvious issues in weewx.conf).
You need to forget about index.html and wee_reports for the time being, you have a fundamental config problem with the sdr driver that is preventing WeeWX from receiving data. No data in means no data to the database which means no WeeWX output. So wee_reports will not do anything mainingful and index.html will not be produced. When obtaining a log extract you should edit weewx.conf, set debug = 1, save weewx.conf and restart WeeWX. Let WeeWX run for at least two archive periods (in you case 10 minutes) and then take a copy of the log showing the full WeeWX startup and the 10 minutes of log activity. Post the log extract here, no zips or compressed files, just plain text (far easier for us to read on mobile devices etc). Don’t restart WeeWX multiple times or post excessively long log extracts (unless expressly asked for), again far easier for us to read if your log extract is not excessively long. In terms of your sdr problem, I would sort out your WeeWX install (is it setup.py or a package install ?). I would then work through the ‘Configuration’ and ‘How to diagnose problems‘ sections (in order) of the sdr driver readme <https://github.com/matthewwall/weewx-sdr#readme> to make sure you have the sdr driver properly configured. If you are still stuck, come back here and post a sanitised copy of (the correct) weewx.conf (the wee_debug <http://weewx.com/docs/utilities.htm#wee_debug_utility> utility can do this for you) as well as a log extract as I described above. Gary On Tuesday, 27 April 2021 at 17:09:22 UTC+10 [email protected] wrote: > Did you find the weewx.conf file to be free of problems? > > Here is a 40 minute segment of the syslog - from the start of a boot of > the Ubuntu 20 virtual machine. > You can see the weewx service starting and 'Loading station type SDR > (user.sdr)'. > > > On Tue, Apr 27, 2021, 12:35 AM vince <[email protected]> wrote: > >> I'm going to have to give up here. >> >> The log info you've provided is not enough to go on. We need your >> syslog for at least two or three archive periods after you restart weewx. >> The 'very' limited data you've provided so far is missing a lot of elements >> in your sensor_map, so I'm not certain your map is even correct. >> >> Somebody who runs the same gear as you is going to be needed to work this >> one, once you post enough of the syslog for folks to be able to try to help >> more. >> >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/yejkXG-_uZo/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/030dadf7-e3de-4ad5-9a32-9a9094a2a4f0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/030dadf7-e3de-4ad5-9a32-9a9094a2a4f0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6896f7b7-3cfd-474a-93b6-b601aeb50a27n%40googlegroups.com.
