New template now running without errors (on WeeWX4.4.0&Python3.x on Raspian_Buster) and the output-file checked to be compatible with the serversoftware of HetWeerActueel (version HWA2.0) Backwards compatibility of this new template with older WeeWX-versions (using Python2.x, and now using the 'old' template) *not* checked!
Duplicate posting is not a good idea. Also because the members of HetWeerActueel are >90% dutch-speaking, therefore the resulting solution is described (in dutch) at https://www.hetweeractueel.nl/forum/viewtopic.php?p=73156#p73156 Would like to thank all contributors to my probing & trying: your hints really assisted to keep me to move forward! Op maandag 3 mei 2021 om 00:55:23 UTC+2 schreef gjr80: > It's a bit of python 2v3 and poor coding. The first thing to remember is > that in a WeeWX Cheetah template .formatted (now .formatted()) returns a > string, .raw returns the raw value; typically an int or a float or None > (though it could also be a string if the underlying field is a string but > there are none of those in any of the WeeWX shipped schemas). > > Under python2 you can compare strings to numerics (int and float) without > error, that being said you will not get the correct answer but it won't > raise an error. Try doing this: > > gary@buster5:~$ python2 > Python 2.7.16 (default, Oct 10 2019, 22:02:15) > [GCC 8.3.0] on linux2 > Type "help", "copyright", "credits" or "license" for more information. > >>> "5" > 4 > True > >>> "3" > 4 > True > >>> > > Note that the second expression gives and incorrect answer. Python 3 is a > little more picky, trying the same under python3 raises an error: > > gary@buster5:~$ python3 > Python 3.7.3 (default, Jan 22 2021, 20:04:44) > [GCC 8.3.0] on linux > Type "help", "copyright", "credits" or "license" for more information. > >>> "5" > 4 > > Traceback (most recent call last): > File "<stdin>", line 1, in <module> > TypeError: '>' not supported between instances of 'str' and 'int' > > Then add into the mix the fact that a .raw could return the python value > None. Python 2 will happily allow None in a comparison but python3 will > not, it will raise a TypeError albeit with a different error message. > > So getting back to the original comparison expression in the report. Under > python2 it will operate without error, it may give the wrong result under > certain conditions but it will not cause an error that will force the > template generation to abort. Under python3 the expression will raise an > error on every generation and the template will abort. The obvious solution > is to change .format to .raw, that will work under most conditions but if > $trend.barometer.raw is ever None (quite possible on startup or if there > has been an interruption) it will fail. The solution is to either catch the > error and deal with it or alter the conditional to check for None, eg > (untested): > > #if $trend.barometer.raw is not None and $trend.barometer.raw > 0 > #do something > #end if > > Gary > On Monday, 3 May 2021 at 07:56:41 UTC+10 [email protected] wrote: > >> Yes. >> >> I can't find the official documentation but See >> https://devopedia.org/python-2-vs-3 >> Although Python is strongly typed, Python 2 permits strange comparisons: >> None >> < 3 < "2" >> >> On Sun, May 2, 2021 at 2:47 PM Ton vanN <[email protected]> wrote: >> >>> Reason for my speculation: >>> at the HWA-forum several people already using WeeWx for years with the >>> original HWA-template, *probably* started & still operating with >>> Python2.x, and never heard complaints about the template. >>> >>> That triggers another aspect: >>> when issuing for the HWA-Forum this updated version of the template, >>> some advice must be given that (backwards) application with Python2.x must >>> be checked. >>> Best to give this template-version and also the older version a related, >>> distinguishing name. >>> >>> Op zondag 2 mei 2021 om 23:33:32 UTC+2 schreef Ton vanN: >>> >>>> Peter, that was the hint required! >>>> The HWA-template now has become active. >>>> >>>> Speculation, but could this be an aspect of changing from Python2.x to >>>> Python3.x? >>>> >>>> >>>> Op zondag 2 mei 2021 om 23:06:42 UTC+2 schreef [email protected]: >>>> >>>>> Looks like that could be it. The .formatted is turning the barometer >>>>> value into a string and comparing it against zero, which is an int. Might >>>>> try >>>>> >>>>> $trend.barometer.raw > 0 >>>>> >>>>> I would have thought that Python would have cast the string into an >>>>> int for you, but apparently not. >>>>> >>>>> On Sun, May 2, 2021 at 1:45 PM Ton vanN <[email protected]> wrote: >>>>> >>>>>> The error report for the HWA-template is like >>>>>> >>>>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>>>> weewx.cheetahgenerator: **** Ignoring template >>>>>> /home/weewx/skins/Standard/openweerdata.htm.tmpl >>>>>> May 2 22:20:46 Raspberry8 weewx[2139] ERROR >>>>>> weewx.cheetahgenerator: **** Reason: '>' not supported between instances >>>>>> of >>>>>> 'str' and 'int' >>>>>> >>>>>> That seems to point to the section in the template which determines >>>>>> barotrend >>>>>> with first scriptlines >>>>>> >>>>>> #if $trend.barometer.formatted > 0 >>>>>> \$barTrend = "Rising"; >>>>>> #end if >>>>>> >>>>>> *Not* *[?]* to the earlier section which translates windDir.raw into >>>>>> windDirection, because those scriptlines have 'real' values for >>>>>> comparison >>>>>> >>>>>> #if $current.windDir.raw >= 11.25 and $current.windDir.raw < >>>>>> 33.75 >>>>>> \$windDirection = "NNO"; >>>>>> >>>>>> Apparently some tiny detail which differentiates a comparison with >>>>>> integer value and a comparison with real value: >>>>>> *or* is the problem in the lefthandside of the comparison? >>>>>> Op zondag 2 mei 2021 om 21:29:59 UTC+2 schreef Ton vanN: >>>>>> >>>>>>> That aspect of /home/weewx/skin/basic now solved. >>>>>>> Related question: solution also applicable for v4.5? >>>>>>> >>>>>>> Now focus on finding solution for HWA-template. >>>>>>> >>>>>>> Op zondag 2 mei 2021 om 17:26:42 UTC+2 schreef [email protected]: >>>>>>> >>>>>>>> It looks like the example skin "basic" has a few issues. To get it >>>>>>>> to work, go into basic/index.html.tmpl and change this >>>>>>>> >>>>>>>> <div id='data_table'> >>>>>>>> #include $Extras.current >>>>>>>> <p> </p> >>>>>>>> #include $Extras.hilo >>>>>>>> </div> >>>>>>>> >>>>>>>> to this >>>>>>>> >>>>>>>> <div id='data_table'> >>>>>>>> #include "current.inc" >>>>>>>> <p> </p> >>>>>>>> #include "hilo.inc" >>>>>>>> </div> >>>>>>>> >>>>>>>> In the file current.inc, change this >>>>>>>> >>>>>>>> #if $trend.windSpeed.formatted > 0 >>>>>>>> ⇧ >>>>>>>> #elif $trend.windSpeed.formatted < 0 >>>>>>>> ⇩ >>>>>>>> #end if >>>>>>>> >>>>>>>> >>>>>>>> to this >>>>>>>> >>>>>>>> #if $trend.windSpeed.raw > 0 >>>>>>>> ⇧ >>>>>>>> #elif $trend.windSpeed.raw < 0 >>>>>>>> ⇩ >>>>>>>> #end if >>>>>>>> >>>>>>>> >>>>>>>> On Sun, May 2, 2021 at 12:45 AM Ton vanN <[email protected]> wrote: >>>>>>>> >>>>>>>>> Digging a bit deeper, the reason given for that errorreport is >>>>>>>>> correct, because subfolder INST_SKIN_ROOT indeed does not exist >>>>>>>>> Reason: [Errno 2] Bestand of map bestaat niet: >>>>>>>>> '/home/weewx/skins/basic/INST_SKIN_ROOT/basic/current.inc' >>>>>>>>> But why is WeeWx asking for it? This is standard configuration >>>>>>>>> (besides my activation of StdReport and related mod of skin.conf). >>>>>>>>> >>>>>>>>> Op zondag 2 mei 2021 om 09:27:56 UTC+2 schreef Ton vanN: >>>>>>>>> >>>>>>>>>> Perhaps related: >>>>>>>>>> the error reported in time-segment 08:21:58 is strange, because >>>>>>>>>> the file index.html.tmpl is actually present at the indicated >>>>>>>>>> location. >>>>>>>>>> >>>>>>>>>> Op zondag 2 mei 2021 om 08:35:33 UTC+2 schreef Ton vanN: >>>>>>>>>> >>>>>>>>> Tom, >>>>>>>>>>> ;-) That was a really good advice! >>>>>>>>>>> Turned to running WeeWX as daemon, started the logging and got a >>>>>>>>>>> different read-out which now includes a reference to the >>>>>>>>>>> HWA-template. >>>>>>>>>>> That confirms my 'nagging feeling' that something is not OK with >>>>>>>>>>> the handling of that HWA-template: see time-segment 08:21:59 >>>>>>>>>>> Next step is finding a soulution ..... >>>>>>>>>>> >>>>>>>>>>> Op zaterdag 1 mei 2021 om 20:02:10 UTC+2 schreef >>>>>>>>>>> [email protected]: >>>>>>>>>>> >>>>>>>>>>>> This is most likely being caused by the terminal session >>>>>>>>>>>> detaching from the process. This can happen when you ssh into a >>>>>>>>>>>> computer, >>>>>>>>>>>> start a process, then exit the ssh session. >>>>>>>>>>>> >>>>>>>>>>>> Either run weewxd as a daemon, or keep the terminal window open. >>>>>>>>>>>> >>>>>>>>>>>> That's the best I can come up with. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Sat, May 1, 2021 at 4:24 AM Anton vanNwnhzn@GMail < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Addition to description of *Sequence1*. >>>>>>>>>>>>> >>>>>>>>>>>>> Once weewx has been started, at Putty's CLI appears the >>>>>>>>>>>>> expected stream of print-out. >>>>>>>>>>>>> At the keyboard break that stream ends with an error report. >>>>>>>>>>>>> Perhaps that error report also provides some relevant info? >>>>>>>>>>>>> See below the last printout from the loop and the error report >>>>>>>>>>>>> mentioned above. >>>>>>>>>>>>> >>>>>>>>>>>>> LOOP: 2021-05-01 13:17:59 CEST (1619867879) altimeter: >>>>>>>>>>>>> 31.165113295698216, appTemp: 28.451970776082117, barometer: >>>>>>>>>>>>> 31.09999991633433, cloudbase: 1300.0558352360692, >>>>>>>>>>>>> consBatteryVoltage: >>>>>>>>>>>>> 12.743352544782736, dateTime: 1619867879, dewpoint: >>>>>>>>>>>>> 27.19647824994742, >>>>>>>>>>>>> heatindex: 32.6713164908827, heatingVoltage: 11.71583632592742, >>>>>>>>>>>>> humidex: >>>>>>>>>>>>> 32.6713164908827, inDewpoint: 31.079532540856405, inHumidity: >>>>>>>>>>>>> 29.99999665337326, inTemp: 63.00000167331337, >>>>>>>>>>>>> inTempBatteryStatus: 0, >>>>>>>>>>>>> maxSolarRad: 812.0133117257177, outHumidity: 79.99999749002984, >>>>>>>>>>>>> outTemp: >>>>>>>>>>>>> 32.6713164908827, outTempBatteryStatus: 0, pressure: >>>>>>>>>>>>> 31.09999991633433, >>>>>>>>>>>>> radiation: 888.7102401456455, rain: 0, rainBatteryStatus: 0, >>>>>>>>>>>>> rainRate: 0.0, >>>>>>>>>>>>> referenceVoltage: 12.0, rxCheckPercent: 45.10949739082836, >>>>>>>>>>>>> supplyVoltage: >>>>>>>>>>>>> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 12.441943362039037, >>>>>>>>>>>>> windBatteryStatus: 0, windchill: 32.6713164908827, windDir: >>>>>>>>>>>>> 359.99998494017905, windGust: 5.019940321204786e-07, windGustDir: >>>>>>>>>>>>> 359.99998494017905, windSpeed: 4.1832835950827985e-07 >>>>>>>>>>>>> ^CTraceback (most recent call last): >>>>>>>>>>>>> File "./bin/weewxd", line 264, in <module> >>>>>>>>>>>>> main() >>>>>>>>>>>>> File "./bin/weewxd", line 157, in main >>>>>>>>>>>>> engine.run() >>>>>>>>>>>>> File "/home/weewx/bin/weewx/engine.py", line 208, in run >>>>>>>>>>>>> for packet in self.console.genLoopPackets(): >>>>>>>>>>>>> File "/home/weewx/bin/weewx/drivers/simulator.py", line 162, >>>>>>>>>>>>> in genLoopPackets >>>>>>>>>>>>> time.sleep(sleep_time) >>>>>>>>>>>>> KeyboardInterrupt >>>>>>>>>>>>> pi@Raspberry8:/home/weewx $ >>>>>>>>>>>>> Op 1-5-2021 om 12:28 schreef Ton vanN: >>>>>>>>>>>>> >>>>>>>>>>>>> As requested, a leaner realisation. >>>>>>>>>>>>> In attached file the results of 2 sequences executed: >>>>>>>>>>>>> - in both cases 'clean restart' of the raspberry to ensure >>>>>>>>>>>>> that no unintended process running, followed by 1 direct >>>>>>>>>>>>> switch-on of weewx >>>>>>>>>>>>> - the sequences differ in the way going to logging, as >>>>>>>>>>>>> described in the file >>>>>>>>>>>>> - in sequence1 apparently oneshot run before weewx stops. Exit >>>>>>>>>>>>> of logging is by keyboard break. >>>>>>>>>>>>> - in sequence2 stream of repeating logging info. Also >>>>>>>>>>>>> terminated the logging by keyboard break. >>>>>>>>>>>>> >>>>>>>>>>>>> Op vrijdag 30 april 2021 om 17:34:47 UTC+2 schreef >>>>>>>>>>>>> [email protected]: >>>>>>>>>>>>> >>>>>>>>>>>>>> You have many instances of weewxd all running simultaneously. >>>>>>>>>>>>>> Kill them all, then start one. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Fri, Apr 30, 2021 at 7:56 AM Ton vanN <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> As requested. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Scanning the logging see repeated reporting of loading of >>>>>>>>>>>>>>> StdReport, but no text clearly pointing to errors in execution >>>>>>>>>>>>>>> of >>>>>>>>>>>>>>> StandardReport, nor any results. >>>>>>>>>>>>>>> But as explained in the first message of this thread, have >>>>>>>>>>>>>>> 'limited' experience with weewx ... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Op vrijdag 30 april 2021 om 11:28:53 UTC+2 schreef gjr80: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The config files and template tell us what should be >>>>>>>>>>>>>>>> happening but the log will tell us what is actually happening. >>>>>>>>>>>>>>>> Have you >>>>>>>>>>>>>>>> looked in the log? Are there any errors? You already have >>>>>>>>>>>>>>>> debug = 1 in >>>>>>>>>>>>>>>> weewx.conf so you should be able to work out from the log what >>>>>>>>>>>>>>>> is being >>>>>>>>>>>>>>>> generated and what is not. Post at least 10 minutes of log >>>>>>>>>>>>>>>> here and we can >>>>>>>>>>>>>>>> see what is going on. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>> On Friday, 30 April 2021 at 19:00:29 UTC+10 >>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Tom, >>>>>>>>>>>>>>>>> Puzzled/baffled, because following the hints from you and >>>>>>>>>>>>>>>>> taking into account also the hints from the much earlier >>>>>>>>>>>>>>>>> discussion between >>>>>>>>>>>>>>>>> you and Franklin Bockstael, but still no file >>>>>>>>>>>>>>>>> openweerdata.htm appearing in >>>>>>>>>>>>>>>>> folder /home/weewx/public_html. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Have attached the (probably) relevant setup-files: >>>>>>>>>>>>>>>>> - weewx.conf which in folder /home/weewx enables >>>>>>>>>>>>>>>>> Standard-skin and sets the related HTML_Root to >>>>>>>>>>>>>>>>> /home/weewx/public_html >>>>>>>>>>>>>>>>> (*on purpose*, to get a different output from 'basic' >>>>>>>>>>>>>>>>> etc.) >>>>>>>>>>>>>>>>> - skin.conf which in folder /home/weewx/skins/Standard in >>>>>>>>>>>>>>>>> the [ToDate]-segment at the first lines enables/sets the >>>>>>>>>>>>>>>>> template for owd >>>>>>>>>>>>>>>>> (and disables the 'later', other templates) >>>>>>>>>>>>>>>>> - the template openweerdata.htm.tmpl as located in >>>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> The adapted conf-files seem OK, but now the nagging >>>>>>>>>>>>>>>>> feeling that the template has an inhibiting error. >>>>>>>>>>>>>>>>> But that is contradicted by the fact that Franklin >>>>>>>>>>>>>>>>> Bockstael has it in operation since long time without >>>>>>>>>>>>>>>>> problems. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> During testing not running WeeWx as daemon, but 'discrete >>>>>>>>>>>>>>>>> start' by command ./bin/weexd >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Do you see a solution? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 15:40:06 UTC+2 schreef >>>>>>>>>>>>>>>>> [email protected]: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I should add that the template must also be listed in the >>>>>>>>>>>>>>>>>> corresponding skin.conf, in the [[ToDate]] section. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 6:31 AM Tom Keffer < >>>>>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Yes, the skin has to be enabled for any of the templates >>>>>>>>>>>>>>>>>>> in the skin's folder to be processed. So, if you put your >>>>>>>>>>>>>>>>>>> "HWA" template in >>>>>>>>>>>>>>>>>>> ./Standard, then the report StandardReport must be enabled. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Or, you can put HWA in your "./basic" folder, then >>>>>>>>>>>>>>>>>>> enable your basic report. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Either way will work. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wed, Apr 28, 2021 at 1:07 AM Ton vanN < >>>>>>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> *Brainwave?* >>>>>>>>>>>>>>>>>>>> Aiming at a first, basic realisation the folder >>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard seeming the 'obvious' place, >>>>>>>>>>>>>>>>>>>> the template for >>>>>>>>>>>>>>>>>>>> generation of the HWA-file was put in that folder. >>>>>>>>>>>>>>>>>>>> Considering similarity with generation of other >>>>>>>>>>>>>>>>>>>> html-files the call to the HWA-template was put in >>>>>>>>>>>>>>>>>>>> skin.conf in same folder >>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Looking in /home/weewx at the below setting in >>>>>>>>>>>>>>>>>>>> weewx.conf, starting to doubt that such choice is correct. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> [[StandardReport]] >>>>>>>>>>>>>>>>>>>> # This is the old "Standard" skin. By >>>>>>>>>>>>>>>>>>>> default, it is not enabled. >>>>>>>>>>>>>>>>>>>> skin = Standard >>>>>>>>>>>>>>>>>>>> enable = false >>>>>>>>>>>>>>>>>>>> [[basic]] >>>>>>>>>>>>>>>>>>>> skin = basic >>>>>>>>>>>>>>>>>>>> HTML_ROOT = /var/weewx/reports >>>>>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>>>>> current = >>>>>>>>>>>>>>>>>>>> INST_SKIN_ROOT/basic/current.inc >>>>>>>>>>>>>>>>>>>> hilo = INST_SKIN_ROOT/basic/hilo.inc >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> If enable=false, *it looks as if* 'Standard'will not >>>>>>>>>>>>>>>>>>>> be called and (as consequence no call to the HWA-template >>>>>>>>>>>>>>>>>>>> at it's present >>>>>>>>>>>>>>>>>>>> location). >>>>>>>>>>>>>>>>>>>> But if that assumption is correct, where should I >>>>>>>>>>>>>>>>>>>> alternatively put the template and call to the >>>>>>>>>>>>>>>>>>>> HWA-template to stay in line >>>>>>>>>>>>>>>>>>>> with 'normal practise'? >>>>>>>>>>>>>>>>>>>> *[Or simple enabling of 'Standard'?]* >>>>>>>>>>>>>>>>>>>> Op woensdag 28 april 2021 om 08:30:52 UTC+2 schreef Ton >>>>>>>>>>>>>>>>>>>> vanN: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> As requested, attached is the repeating segment of the >>>>>>>>>>>>>>>>>>>>> syslog with debug=1 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Op dinsdag 27 april 2021 om 13:21:12 UTC+2 schreef >>>>>>>>>>>>>>>>>>>>> [email protected]: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Please try again, but this time set debug=1 first. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Stop weewx >>>>>>>>>>>>>>>>>>>>>> Set debug=1 (in weewx.conf) >>>>>>>>>>>>>>>>>>>>>> Restart weewx >>>>>>>>>>>>>>>>>>>>>> Post the log from startup. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Fri, Mar 26, 2021 at 5:41 AM Ton vanN < >>>>>>>>>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Related syslog-segment from RPI_CLI obtained with >>>>>>>>>>>>>>>>>>>>>>> PuttySSH >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Op vrijdag 26 maart 2021 om 10:00:19 UTC+1 schreef >>>>>>>>>>>>>>>>>>>>>>> Ton vanN: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Novice to WeeWX. >>>>>>>>>>>>>>>>>>>>>>>> Have the main progam as simulator up and running (= >>>>>>>>>>>>>>>>>>>>>>>> see files updating in folder public_html ). >>>>>>>>>>>>>>>>>>>>>>>> Now trying to implement a template to generate an >>>>>>>>>>>>>>>>>>>>>>>> uploadfile for HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>>>> [has been discussed earlier in this forum, but that >>>>>>>>>>>>>>>>>>>>>>>> discussion apparently not ending with working solution] >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Template [attached in zip-file] should generate a >>>>>>>>>>>>>>>>>>>>>>>> htm-file. >>>>>>>>>>>>>>>>>>>>>>>> For activation of the template I inserted the >>>>>>>>>>>>>>>>>>>>>>>> following text in >>>>>>>>>>>>>>>>>>>>>>>> /home/weewx/skins/Standard/skin.conf at the end of >>>>>>>>>>>>>>>>>>>>>>>> the section CheetahGenerator >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> [[HWA]] >>>>>>>>>>>>>>>>>>>>>>>> # Report that generates an uploadfile for >>>>>>>>>>>>>>>>>>>>>>>> HetWeerActueel. >>>>>>>>>>>>>>>>>>>>>>>> [[[OWD]]] >>>>>>>>>>>>>>>>>>>>>>>> template = openweerdata_wx.htm.tmpl >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Would expect the generated htm-file to appear in >>>>>>>>>>>>>>>>>>>>>>>> folder public_html >>>>>>>>>>>>>>>>>>>>>>>> When running WeeWX no errors (which is OK), but >>>>>>>>>>>>>>>>>>>>>>>> also nowhere the expected htm-file: >>>>>>>>>>>>>>>>>>>>>>>> what needs to be done to activate file-generation? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>>>>>>>>>>>>>> to the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>>>> [email protected]. >>>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d6591a4a-09d9-41f7-8092-5e0fcbc113ccn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>> [email protected]. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/33bd4fee-48c9-42dd-9e1e-ce04ba727dddn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/9446dcc8-ebd9-4d63-9198-c501af3b1988n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>> . >>>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to a >>>>>>>>>>>>> topic in the Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/_KTQ9XcGIRo/unsubscribe >>>>>>>>>>>>> . >>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fc4aac6f-befe-48f5-b8c8-da7d757dcfd1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> >>>>>>>>>>>>> =============================================================== >>>>>>>>>>>>> Contactinfo voor Anton van Nieuwenhuijzen: >>>>>>>>>>>>> Email = [email protected] >>>>>>>>>>>>> Fax2Mail = (+31/0)84.8397303 <+31%2084%20839%207303> [ook >>>>>>>>>>>>> Voice2Mail] >>>>>>>>>>>>> =============================================================== >>>>>>>>>>>>> Deze E-mail en eventuele aanhangende files zijn >>>>>>>>>>>>> alleen bestemd voor de geadresseerde(n). >>>>>>>>>>>>> Als je deze E-mail ten onrechte hebt ontvangen, >>>>>>>>>>>>> dan aub verwijderen en de afzender informeren. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/dcf553de-16de-a99b-58d1-77897a1e8d5f%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/74dbbd75-8386-48e6-9b37-d2074ff8c18en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/d1c996d5-a500-401b-8039-53d81d0c1d20n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> >>>>> >>>>> -- >>>>> Peter Quinn >>>>> (415)794-2264 <(415)%20794-2264> >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/271fcd47-8956-4240-8724-a3f17c2ec759n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> Peter Quinn >> (415)794-2264 <(415)%20794-2264> >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9b709f4c-e37a-4dc6-936d-ea2a7f873156n%40googlegroups.com.
