Hi Lang,
thank you for answering. So, the configuration file is named 'piscina.conf'
because I am using WeeWX in multi mode, and each station has its personal
configuration file. In the specific case, I'm using the WN30 sensor for
measuring a pole water temperature. Here is the complete log:
May 24 21:44:31 raspberrypi weewx-piscina[2019]: engine: Initializing weewx
version 3.9.2
May 24 21:44:31 raspberrypi weewx-piscina[2019]: engine: Using Python
2.7.16 (default, Oct 10 2019, 22:02:15) #012[GCC 8.3.0]
May 24 21:44:31 raspberrypi weewx-piscina[2019]: engine: Platform
Linux-5.4.51+-armv6l-with-debian-10.4
May 24 21:44:31 raspberrypi weewx-piscina[2019]: engine: Locale is
'en_GB.UTF-8'
May 24 21:44:31 raspberrypi weewx-piscina[2019]: engine: pid file is
/var/run/weewx-piscina.pid
May 24 21:44:31 raspberrypi weewx-piscina[2023]: engine: Using
configuration file /etc/weewx/piscina.conf
May 24 21:44:31 raspberrypi weewx-piscina[2023]: engine: Debug is 1
May 24 21:44:31 raspberrypi weewx-piscina[2023]: engine: Initializing engine
May 24 21:44:31 raspberrypi weewx-piscina[2023]: engine: Loading station
type GW1000 (user.gw1000)
May 24 21:44:34 raspberrypi weewx-piscina[2023]: gw1000: Failed to obtain
response to attempt 1 to send command 'CMD_READ_STATION_MAC': timed out
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: field map is
{'co2': 'co2', 'co2_24h_avg': 'co2_24h_avg', 'dateTime': 'datetime',
'daymaxwind': 'daymaxwind', 'dayRain': 'rainday', 'dewpoint': 'dewpoint',
'extraHumid1': 'humid1', 'extraHumid2': 'humid2', 'extraHumid3': 'humid3',
'extraHumid4': 'humid4', 'extraHumid5': 'humid5', 'extraHumid6': 'humid6',
'extraHumid7': 'humid7', 'extraHumid8': 'humid8', 'extraHumid17':
'humid17', 'extraTemp1': 'temp1', 'extraTemp2': 'temp2', 'extraTemp3':
'temp3', 'extraTemp4': 'temp4', 'extraTemp5': 'temp5', 'extraTemp6':
'temp6', 'extraTemp7': 'temp7', 'extraTemp8': 'temp8', 'extraTemp9':
'temp9', 'extraTemp10': 'temp10', 'extraTemp11': 'temp11', 'extraTemp12':
'temp12', 'extraTemp13': 'temp13', 'extraTemp14': 'temp14', 'extraTemp15':
'temp15', 'extraTemp16': 'temp16', 'extraTemp17': 'temp17', 'heatindex':
'heatindex', 'hourRain': 'rainhour', 'inHumidity': 'inhumid', 'inTemp':
'intemp', 'leafWet1': 'leafwet1', 'leafWet2': 'leafwet2', 'leafWet3':
'leafwet3', 'leafWet4': 'leafwet4', 'leafWet5': 'leafwet5', 'leafWet6':
'leafwet6', 'leafWet7': 'leafwet7', 'leafWet8': 'leafwet8', 'leak1':
'leak1', 'leak2': 'leak2', 'leak3': 'leak3', 'leak4': 'leak4',
'lightning_distance': 'lightningdist', 'lightning_last_det_time':
'lightningdettime', 'lightning_strike_count': 'lightning_strike_count',
'lightningcount': 'lightningcount', 'luminosity': 'light', 'monthRain':
'rainmonth', 'outHumidity': 'outhumid', 'outTemp': 'outtemp', 'pm2_5':
'pm251', 'pm2_51_24h_avg': 'pm251_24h_avg', 'pm2_52': 'pm252',
'pm2_52_24h_avg': 'pm252_24h_avg', 'pm2_53': 'pm253', 'pm2_53_24h_avg':
'pm253_24h_avg', 'pm2_54': 'pm254', 'pm2_54_24h_avg': 'pm254_24h_avg',
'pm2_55': 'pm255', 'pm2_55_24h_avg': 'pm255_24h_avg', 'pm10': 'pm10',
'pm10_24h_avg': 'pm10_24h_avg', 'pressure': 'absbarometer', 'rain': 'rain',
'rainRate': 'rainrate', 'relbarometer': 'relbarometer', 'soilMoist1':
'soilmoist1', 'soilMoist2': 'soilmoist2', 'soilMoist3': 'soilmoist3',
'soilMoist4': 'soilmoist4', 'soilMoist5': 'soilmoist5', 'soilMoist6':
'soilmoist6', 'soilMoist7': 'soilmoist7', 'soilMoist8': 'soilmoist8',
'soilMoist9': 'soilmoist9', 'soilMoist10': 'soilmoist10', 'soilMoist11':
'soilmoist11', 'soilMoist12': 'soilmoist12', 'soilMoist13': 'soilmoist13',
'soilMoist14': 'soilmoist14', 'soilMoist15': 'soilmoist15', 'soilMoist16':
'soilmoist16', 'soilTemp1': 'soiltemp1', 'soilTemp2': 'soiltemp2',
'soilTemp3': 'soiltemp3', 'soilTemp4': 'soiltemp4', 'soilTemp5':
'soiltemp5', 'soilTemp6': 'soiltemp6', 'soilTemp7': 'soiltemp7',
'soilTemp8': 'soiltemp8', 'soilTemp9': 'soiltemp9', 'soilTemp10':
'soiltemp10', 'soilTemp11': 'soiltemp11', 'soilTemp12': 'soiltemp12',
'soilTemp13': 'soiltemp13', 'soilTemp14': 'soiltemp14', 'soilTemp15':
'soiltemp15', 'soilTemp16': 'soiltemp16', 'stormRain': 'rainevent',
'totalRain': 'raintotals', 'UV': 'uvi', 'uvradiation': 'uv', 'weekRain':
'rainweek', 'wh25_batt': 'wh25_batt', 'wh25_sig': 'wh25_sig', 'wh26_batt':
'wh26_batt', 'wh26_sig': 'wh26_sig', 'wh31_ch1_batt': 'wh31_ch1_batt',
'wh31_ch1_sig': 'wh31_ch1_sig', 'wh31_ch2_batt': 'wh31_ch2_batt',
'wh31_ch2_sig': 'wh31_ch2_sig', 'wh31_ch3_batt': 'wh31_ch3_batt',
'wh31_ch3_sig': 'wh31_ch3_sig', 'wh31_ch4_batt': 'wh31_ch4_batt',
'wh31_ch4_sig': 'wh31_ch4_sig', 'wh31_ch5_batt': 'wh31_ch5_batt',
'wh31_ch5_sig': 'wh31_ch5_sig', 'wh31_ch6_batt': 'wh31_ch6_batt',
'wh31_ch6_sig': 'wh31_ch6_sig', 'wh31_ch7_batt': 'wh31_ch7_batt',
'wh31_ch7_sig': 'wh31_ch7_sig', 'wh31_ch8_batt': 'wh31_ch8_batt',
'wh31_ch8_sig': 'wh31_ch8_sig', 'wh35_ch1_batt': 'wh35_ch1_batt',
'wh35_ch1_sig': 'wh35_ch1_sig', 'wh35_ch2_batt': 'wh35_ch2_batt',
'wh35_ch2_sig': 'wh35_ch2_sig', 'wh35_ch3_batt': 'wh35_ch3_batt',
'wh35_ch3_sig': 'wh35_ch3_sig', 'wh35_ch4_batt': 'wh35_ch4_batt',
'wh35_ch4_sig': 'wh35_ch4_sig', 'wh35_ch5_batt': 'wh35_ch5_batt',
'wh35_ch5_sig': 'wh35_ch5_sig', 'wh35_ch6_batt': 'wh35_ch6_batt',
'wh35_ch6_sig': 'wh35_ch6_sig', 'wh35_ch7_batt': 'wh35_ch7_batt',
'wh35_ch7_sig': 'wh35_ch7_sig', 'wh35_ch8_batt': 'wh35_ch8_batt',
'wh35_ch8_sig': 'wh35_ch8_sig', 'wh40_batt': 'wh40_batt', 'wh40_sig':
'wh40_sig', 'wh41_ch1_batt': 'wh41_ch1_batt', 'wh41_ch1_sig':
'wh41_ch1_sig', 'wh41_ch2_batt': 'wh41_ch2_batt', 'wh41_ch2_sig':
'wh41_ch2_sig', 'wh41_ch3_batt': 'wh41_ch3_batt', 'wh41_ch3_sig':
'wh41_ch3_sig', 'wh41_ch4_batt': 'wh41_ch4_batt', 'wh41_ch4_sig':
'wh41_ch4_sig', 'wh45_batt': 'wh45_batt', 'wh45_sig': 'wh45_sig',
'wh51_ch1_batt': 'wh51_ch1_batt', 'wh51_ch1_sig': 'wh51_ch1_sig',
'wh51_ch2_batt': 'wh51_ch2_batt', 'wh51_ch2_sig': 'wh51_ch2_sig',
'wh51_ch3_batt': 'wh51_ch3_batt', 'wh51_ch3_sig': 'wh51_ch3_sig',
'wh51_ch4_batt': 'wh51_ch4_batt', 'wh51_ch4_sig': 'wh51_ch4_sig',
'wh51_ch5_batt': 'wh51_ch5_batt', 'wh51_ch5_sig': 'wh51_ch5_sig',
'wh51_ch6_batt': 'wh51_ch6_batt', 'wh51_ch6_sig': 'wh51_ch6_sig',
'wh51_ch7_batt': 'wh51_ch7_batt', 'wh51_ch7_sig': 'wh51_ch7_sig',
'wh51_ch8_batt': 'wh51_ch8_batt', 'wh51_ch8_sig': 'wh51_ch8_sig',
'wh51_ch9_batt': 'wh51_ch9_batt', 'wh51_ch9_sig': 'wh51_ch9_sig',
'wh51_ch10_batt': 'wh51_ch10_batt', 'wh51_ch10_sig': 'wh51_ch10_sig',
'wh51_ch11_batt': 'wh51_ch11_batt', 'wh51_ch11_sig': 'wh51_ch11_sig',
'wh51_ch12_batt': 'wh51_ch12_batt', 'wh51_ch12_sig': 'wh51_ch12_sig',
'wh51_ch13_batt': 'wh51_ch13_batt', 'wh51_ch13_sig': 'wh51_ch13_sig',
'wh51_ch14_batt': 'wh51_ch14_batt', 'wh51_ch14_sig': 'wh51_ch14_sig',
'wh51_ch15_batt': 'wh51_ch15_batt', 'wh51_ch15_sig': 'wh51_ch15_sig',
'wh51_ch16_batt': 'wh51_ch16_batt', 'wh51_ch16_sig': 'wh51_ch16_sig',
'wh55_ch1_batt': 'wh55_ch1_batt', 'wh55_ch1_sig': 'wh55_ch1_sig',
'wh55_ch2_batt': 'wh55_ch2_batt', 'wh55_ch2_sig': 'wh55_ch2_sig',
'wh55_ch3_batt': 'wh55_ch3_batt', 'wh55_ch3_sig': 'wh55_ch3_sig',
'wh55_ch4_batt': 'wh55_ch4_batt', 'wh55_ch4_sig': 'wh55_ch4_sig',
'wh57_batt': 'wh57_batt', 'wh57_sig': 'wh57_sig', 'wh65_batt': 'wh65_batt',
'wh65_sig': 'wh65_sig', 'wh68_batt': 'wh68_batt', 'wh68_sig': 'wh68_sig',
'windchill': 'windchill', 'windDir': 'winddir', 'windGust': 'gustspeed',
'windSpeed': 'windspeed', 'ws80_batt': 'ws80_batt', 'ws80_sig': 'ws80_sig',
'yearRain': 'rainyear'}
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: driver version is
0.3.1
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: GW1000 address is
192.168.0.25:45000
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: poll interval is
20 seconds
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: max tries is 3,
retry wait time is 10 seconds
May 24 21:44:44 raspberrypi weewx-piscina[2023]: gw1000: broadcast address
is 255.255.255.255:46000, socket timeout is 2 seconds
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdTimeSynch
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdTimeSynch
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdConvert
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: StdConvert target
unit is 0x10
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdConvert
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdCalibrate
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdCalibrate
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdQC
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdQC
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.wxservices.StdWXCalculate
May 24 21:44:44 raspberrypi weewx-piscina[2023]: wxcalculate: The following
values will be calculated: barometer=software, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware,
rainRate=prefer_hardware, windrun=prefer_hardware,
heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
May 24 21:44:44 raspberrypi weewx-piscina[2023]: wxcalculate: The following
algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.wxservices.StdWXCalculate
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdArchive
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Archive will use
data binding wx_binding
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Record generation
will be attempted in 'software'
May 24 21:44:44 raspberrypi weewx-piscina[2023]: engine: Using archive
interval of 300 seconds (software record generation)
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Use LOOP data in
hi/low calculations: 1
May 24 21:44:45 raspberrypi weewx-piscina[2023]: gw1000: Invalid response
to attempt 1 to send command 'CMD_READ_SENSOR_ID_NEW': Invalid command code
in API response. Expected '60' (0x3C), received '99' (0x63).
May 24 21:44:45 raspberrypi weewx-piscina[2023]: manager: Daily summary
version is 2.0
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Using binding
'wx_binding' to database 'piscina.sdb'
May 24 21:44:45 raspberrypi weewx-piscina[2023]: manager: Starting backfill
of daily summaries
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdArchive
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdStationRegistry
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: StationRegistry:
Registration not requested.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdStationRegistry
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdWunderground
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: Wunderground:
Posting not enabled.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdWunderground
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdPWSweather
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: PWSweather: Posting
not enabled.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdPWSweather
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdCWOP
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: CWOP: Posting not
enabled.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdCWOP
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdWOW
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: WOW: Posting not
enabled.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdWOW
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.restx.StdAWEKAS
May 24 21:44:45 raspberrypi weewx-piscina[2023]: restx: AWEKAS: Posting not
enabled.
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.restx.StdAWEKAS
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdPrint
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdPrint
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Loading service
weewx.engine.StdReport
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Finished loading
service weewx.engine.StdReport
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Starting up weewx
version 3.9.2
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Station does not
support reading the time
May 24 21:44:45 raspberrypi weewx-piscina[2023]: engine: Starting main
packet loop.
May 24 21:44:55 raspberrypi weewx-piscina[2023]: gw1000: Invalid response
to attempt 2 to send command 'CMD_READ_SENSOR_ID_NEW': Invalid command code
in API response. Expected '60' (0x3C), received '99' (0x63).
May 24 21:45:05 raspberrypi weewx-piscina[2023]: gw1000: Invalid response
to attempt 3 to send command 'CMD_READ_SENSOR_ID_NEW': Invalid command code
in API response. Expected '60' (0x3C), received '99' (0x63).
May 24 21:45:05 raspberrypi weewx-piscina[2023]: gw1000: Failed to obtain
response to command 'CMD_READ_SENSOR_ID_NEW' after 3 attempts
May 24 21:45:05 raspberrypi weewx-piscina[2023]: gw1000: IP address
specified in 'weewx.conf', re-discovery was not attempted
May 24 21:45:05 raspberrypi weewx-piscina[2023]: gw1000: Unable to obtain
live sensor data
May 24 21:45:05 raspberrypi weewx-piscina[2023]: gw1000: Next update in 20
seconds
May 24 21:45:05 raspberrypi weewx-piscina[2023]: engine: Main loop exiting.
Shutting engine down.
May 24 21:45:06 raspberrypi weewx-piscina[2023]: gw1000: Gw1000Collector
thread has been terminated
May 24 21:45:06 raspberrypi weewx-piscina[2023]: engine: Caught
WeeWxIOError: Failed to obtain response to command 'CMD_READ_SENSOR_ID_NEW'
after 3 attempts
May 24 21:45:06 raspberrypi weewx-piscina[2023]: **** Waiting 60
seconds then retrying...
And here the configuration file (piscina.conf):
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 200
# Do not modify this. It is used when installing and updating weewx.
version = 3.9.2
loop_on_init = 1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Termometro acqua piscina
# Latitude and longitude in decimal degrees
latitude = 41.446295
longitude = 12.622721
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 10, meter # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = GW1000
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html/piscina
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = km_per_hour2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = km_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four
lines.
# Use quotes around passwords to guard against parsing errors.
user = xxx
password = xxx
server = xxx
path = xxx
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The server, user, and path determine where files will be sent.
# The server is the server name, such as www.threefools.org
# The user is the username, such as weewx
# The path is the destination directory, such as
/var/www/html/weather
# Be sure that the user has write permissions on the destination!
#server = replace_me
#user = replace_me
#path = replace_me
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
ignore_zero_wind = False
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = piscina.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = piscina
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = %(WEEWX_ROOT)s/archive
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name (quotes guard against parsing
errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = user.gw1000.Gw1000Service
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
# Options for extension 'GW1000'
[Accumulator]
# Start GW1000 driver extractors
[[daymaxwind]]
extractor = last
[[lightning_distance]]
extractor = last
[[lightning_strike_count]]
extractor = sum
[[lightningcount]]
extractor = last
[[lightning_last_det_time]]
extractor = last
[[stormRain]]
extractor = last
[[hourRain]]
extractor = last
[[dayRain]]
extractor = last
[[weekRain]]
extractor = last
[[monthRain]]
extractor = last
[[yearRain]]
extractor = last
[[totalRain]]
extractor = last
[[pm2_51_24h_avg]]
extractor = last
[[pm2_52_24h_avg]]
extractor = last
[[pm2_53_24h_avg]]
extractor = last
[[pm2_54_24h_avg]]
extractor = last
[[pm2_55_24h_avg]]
extractor = last
[[pm10_24h_avg]]
extractor = last
[[co2_24h_avg]]
extractor = last
[[wh40_batt]]
extractor = last
[[wh26_batt]]
extractor = last
[[wh25_batt]]
extractor = last
[[wh65_batt]]
extractor = last
[[wh31_ch1_batt]]
extractor = last
[[wh31_ch2_batt]]
extractor = last
[[wh31_ch3_batt]]
extractor = last
[[wh31_ch4_batt]]
extractor = last
[[wh31_ch5_batt]]
extractor = last
[[wh31_ch6_batt]]
extractor = last
[[wh31_ch7_batt]]
extractor = last
[[wh31_ch8_batt]]
extractor = last
[[wh35_ch1_batt]]
extractor = last
[[wh35_ch2_batt]]
extractor = last
[[wh35_ch3_batt]]
extractor = last
[[wh35_ch4_batt]]
extractor = last
[[wh35_ch5_batt]]
extractor = last
[[wh35_ch6_batt]]
extractor = last
[[wh35_ch7_batt]]
extractor = last
[[wh35_ch8_batt]]
extractor = last
[[wh41_ch1_batt]]
extractor = last
[[wh41_ch2_batt]]
extractor = last
[[wh41_ch3_batt]]
extractor = last
[[wh41_ch4_batt]]
extractor = last
[[wh45_batt]]
extractor = last
[[wh51_ch1_batt]]
extractor = last
[[wh51_ch2_batt]]
extractor = last
[[wh51_ch3_batt]]
extractor = last
[[wh51_ch4_batt]]
extractor = last
[[wh51_ch5_batt]]
extractor = last
[[wh51_ch6_batt]]
extractor = last
[[wh51_ch7_batt]]
extractor = last
[[wh51_ch8_batt]]
extractor = last
[[wh51_ch9_batt]]
extractor = last
[[wh51_ch10_batt]]
extractor = last
[[wh51_ch11_batt]]
extractor = last
[[wh51_ch12_batt]]
extractor = last
[[wh51_ch13_batt]]
extractor = last
[[wh51_ch14_batt]]
extractor = last
[[wh51_ch15_batt]]
extractor = last
[[wh51_ch16_batt]]
extractor = last
[[wh55_ch1_batt]]
extractor = last
[[wh55_ch2_batt]]
extractor = last
[[wh55_ch3_batt]]
extractor = last
[[wh55_ch4_batt]]
extractor = last
[[wh57_batt]]
extractor = last
[[wh68_batt]]
extractor = last
[[ws80_batt]]
extractor = last
[[wh40_sig]]
extractor = last
[[wh26_sig]]
extractor = last
[[wh25_sig]]
extractor = last
[[wh65_sig]]
extractor = last
[[wh31_ch1_sig]]
extractor = last
[[wh31_ch2_sig]]
extractor = last
[[wh31_ch3_sig]]
extractor = last
[[wh31_ch4_sig]]
extractor = last
[[wh31_ch5_sig]]
extractor = last
[[wh31_ch6_sig]]
extractor = last
[[wh31_ch7_sig]]
extractor = last
[[wh31_ch8_sig]]
extractor = last
[[wh35_ch1_sig]]
extractor = last
[[wh35_ch2_sig]]
extractor = last
[[wh35_ch3_sig]]
extractor = last
[[wh35_ch4_sig]]
extractor = last
[[wh35_ch5_sig]]
extractor = last
[[wh35_ch6_sig]]
extractor = last
[[wh35_ch7_sig]]
extractor = last
[[wh35_ch8_sig]]
extractor = last
[[wh41_ch1_sig]]
extractor = last
[[wh41_ch2_sig]]
extractor = last
[[wh41_ch3_sig]]
extractor = last
[[wh41_ch4_sig]]
extractor = last
[[wh45_sig]]
extractor = last
[[wh51_ch1_sig]]
extractor = last
[[wh51_ch2_sig]]
extractor = last
[[wh51_ch3_sig]]
extractor = last
[[wh51_ch4_sig]]
extractor = last
[[wh51_ch5_sig]]
extractor = last
[[wh51_ch6_sig]]
extractor = last
[[wh51_ch7_sig]]
extractor = last
[[wh51_ch8_sig]]
extractor = last
[[wh51_ch9_sig]]
extractor = last
[[wh51_ch10_sig]]
extractor = last
[[wh51_ch11_sig]]
extractor = last
[[wh51_ch12_sig]]
extractor = last
[[wh51_ch13_sig]]
extractor = last
[[wh51_ch14_sig]]
extractor = last
[[wh51_ch15_sig]]
extractor = last
[[wh51_ch16_sig]]
extractor = last
[[wh55_ch1_sig]]
extractor = last
[[wh55_ch2_sig]]
extractor = last
[[wh55_ch3_sig]]
extractor = last
[[wh55_ch4_sig]]
extractor = last
[[wh57_sig]]
extractor = last
[[wh68_sig]]
extractor = last
[[ws80_sig]]
extractor = last
##############################################################################
# Options for extension 'GW1000'
[GW1000]
# This section is for the GW1000 API driver.
# How often to poll the GW1000 API, default is every 20 seconds:
poll_interval = 20
# The driver to use:
driver = user.gw1000
##############################################################################
#examples of json
#{"time" : "2019-09-13 15:44:52", "brand" : "OS", "model" : "THGR810", "id"
: 254, "channel" : 1, "battery" : "OK", "temperature_C" : 27.800,
"humidity" : 40}
#{"time" : "2019-09-13 15:45:01", "brand" : "OS", "model" : "THGR810", "id"
: 71, "channel" : 2, "battery" : "OK", "temperature_C" : 27.200, "humidity"
: 46}
Il giorno lunedì 24 maggio 2021 alle 21:35:59 UTC+2 [email protected]
ha scritto:
> The WN30 is just an extra temperature sensor and belongs to the WH31 extra
> sensor group - only it measures only temperature and not humidity.
> As it is primarily meant for measuring water temperature, humidity will be
> always 100% and therefore measuring it makes little sense.
>
> But it works just like other WH31 extra T/H sensors. I have one in my
> collection of WH31 sensors and weewx processes it without any problem.
>
> Is there a special reason why your weewx configuration file is named
> piscina.conf and not weewx.conf ?
> Has weewx been told to use piscina.conf instead of weewx.conf (default) in
> the respective files ?
>
> Can you please provide a *complete* syslog starting from the weewx launch
> until it either terminates itself or you do so by issuing the stop command
> !?
> Also, your weewx.conf (piscina.conf) would be helpful (you can/should
> remove passwords and API-keys if you use any there)
>
> If you so far only started the driver, can you just configure weewx as in
> the GW1000 driver description in the weewx.conf file
> (/etc/weewx/weewx.conf),
> and start weewx - and provide the logs and the weewx.conf file !?
>
> Then we can have a better understanding what going on and what's potential
> going wrong here.
> On 24.05.2021 20:36, [email protected] wrote:
>
> Hi everyone,
> I am trying to use WeeWX with a GW1000 hardware (this
> <https://www.froggit.de/product_info.php?info=p410_dp1500-wi-fi-wetterserver-usb-dongle.html>)
>
> that is receiving data from a WN30 temperature sensor (this
> <https://www.froggit.de/product_info.php?language=en&info=p480_dp30-multi-kanal-temperatur-funksensor-mit-wasserfestem-kabelfuehler.html>).
>
> I installed the hardware and connected to the WiFi, and by the smartphone
> app everything seems fine: in fact I can see live data from there.
> Now, I want to use the GW1000 driver
> <https://github.com/gjr80/weewx-gw1000>for reading its data with WeeWX. I
> correctly followed the instruction and installed the driver on WeeWX 3.9.2,
> but I am having some troubles.
> In particular, I am getting the following error:
> gw1000: Invalid response to attempt 1 to send command
> 'CMD_READ_SENSOR_ID_NEW': Invalid command code in API response. Expected
> '60' (0x3C), received '99' (0x63)
> This is what the test-driver returns:
> $ PYTHONPATH=/home/weewx/bin python -m user.gw1000 --test-driver
> Using configuration file /etc/weewx/piscina.conf
> debug level is '1'
>
> IP address to be obtained by discovery
> Port number set to default port number
>
> Interrogating GW1000 at 192.168.0.25:45000
>
> Traceback (most recent call last):
> File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
> "__main__", fname, loader, pkg_name)
> File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
> exec code in run_globals
> File "/home/weewx/bin/user/gw1000.py", line 5906, in <module>
> main()
> File "/home/weewx/bin/user/gw1000.py", line 5900, in main
> direct_gw100.process_options()
> File "/home/weewx/bin/user/gw1000.py", line 4833, in process_options
> self.test_driver()
> File "/home/weewx/bin/user/gw1000.py", line 5647, in test_driver
> for pkt in driver.genLoopPackets():
> File "/home/weewx/bin/user/gw1000.py", line 2057, in genLoopPackets
> raise weewx.WeeWxIOError(e)
> weewx.WeeWxIOError: Failed to obtain response to command
> 'CMD_READ_SENSOR_ID_NEW' after 3 attempts
>
> Any ideas??
> Thank you!
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/2f6e835e-dbcd-4d71-bcee-cf431475ccd4n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/2f6e835e-dbcd-4d71-bcee-cf431475ccd4n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/7b22d8d2-d1c9-4bd0-b8db-6c658104bce2n%40googlegroups.com.
