Very cool, Rich!
I'll put some effort into it.
Based on your earlier coaching, I've been able to successfully accept MQTT
data from every sensor I've tried, including from a Sonoff Zigbee Bridge
with a bunch of Sonoff SNZB-02 temperature sensors!
[[[tele/ZBBridge/SENSOR]]]
# 0x4472 is #10 Living Room
[[[[ZbReceived_0x4472_Device]]]]
ignore = true
[[[[ZbReceived_0x4472_Name]]]]
ignore = true
[[[[ZbReceived_0x4472_Temperature]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = inTemp
[[[[ZbReceived_0x4472_Humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = inHumidity
[[[[ZbReceived_0x4472_BatteryVoltage]]]]
ignore = true
[[[[ZbReceived_0x4472_BatteryPercentage]]]]
ignore = true
[[[[ZbReceived_0x4472_Endpoint]]]]
ignore = true
[[[[ZbRecieved_0x4472_LinkQuality]]]]
ignore = true
On Wednesday, June 16, 2021 at 1:00:18 PM UTC-5 [email protected] wrote:
> Eric,
> For (2), MQTTSubscribe has a 'filter_out_message_when' option. So, you
> would to do something like this in the MQTTSubscribe section
> [[topics]]
> [[[tele/AS3935/SENSOR]]]
> [[[[AS3935_Event]]]]
> ignore = True
> # MQTT messages with and event value in the following will be ignored.
> filter_out_message_when = 0, 2, 3, 4, 5, 6, 7, 8, 9
> conversion_type = int
> .
> .
> .
>
> A bit more detail on this option can be found here,
> https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring-additional-options#filter_out_message_when
> There is some background information here,
> https://github.com/bellrichm/WeeWX-MQTTSubscribe/discussions/112
>
> For (3), read up on WeeWX accumulators here,
> https://github.com/weewx/weewx/wiki/Accumulators
>
> If you get this working, this is exactly the type of MQTTSubscribe
> configuration that I would like to capture as an example to help others in
> the future.
> - Rich
>
>
> On Tuesday, 15 June 2021 at 19:35:19 UTC-4 Eric K wrote:
>
>> I just assembled this exact setup - AS3935 board with a Wemos D1 mini
>> clone and Tasmota 9.4.0 sensor firmware.
>> I didn't snap a picture before I deployed it, but it looks very much like
>> the attached photo.
>> I followed this page: https://tasmota.github.io/docs/AS3935/
>>
>> Its working and I'm getting live data in the Tasmota web interface.
>> I named it AS3935 in the Tasmota MQTT setup and it's sending telemetry to
>> my mosquitto MQTT broker.
>> The MQTT transmissions (seen from the Tasmota console) look like the
>> example on the tasmota.github AS3935 page:
>> 18:07:21.164 MQT: tele/AS3935/SENSOR =
>> {"Time":"2021-06-15T18:07:21","AS3935":{"Event":0,"Distance":0,"Energy":0,"Stage":7}}
>>
>> I think I need to:
>> 1. set the Tasmota setting AS3935lightevent to 1 so it only sends MQTT
>> messages when there is a lightning strike registered.
>> 2. set up weewx to read the MQTT Event variable so I only react to a
>> valid lightning strike with distance (event 1)
>> 3. Set up the lightning_count variable as an accumulator?
>>
>> I'm not quite sure:
>> 1. how often I should set Tasmota's MQTT report period so I don't miss
>> counting a lightning strike? Once per second?
>> 2. how to set up a conditional statement in the MQTTSubscribe section of
>> weewx.conf to increment the lightning_count only when valid lightning
>> events occur.
>>
>> I'll be looking for example weewx.conf file settings that deal with the
>> AS3935.
>> On Sunday, December 6, 2020 at 12:51:45 PM UTC-6 [email protected] wrote:
>>
>>> Hello guys,
>>> did anyone tried to use *Lightning sensor AS3935* tinkered on cheap
>>> *ESP8266* with WeeWX?
>>>
>>> A time ago, I was user of Tasmota ESP8266 firmware and I know, it can
>>> publish MQTT + JSON data. Here is the manual how to tinker and flash those
>>> two together:
>>> https://tasmota.github.io/docs/AS3935/
>>> I assume, that with JSON / MQTT it would be prety easy to fill WeeWX
>>> database...
>>>
>>> Thanks,
>>> Miso,
>>> Slovakia
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/10f9bd8c-2722-4fed-adab-a54b9d965ab8n%40googlegroups.com.
