I have in weewx.conf
[SDR]
driver = user.sdr
cmd = rtl_433 -q -F json -R 32 -M utc -M level -f 868.3M
path = /usr/local/bin
#ld_library_path = /usr/local/lib:/opt/rtl-sdr/lib
log_unmapped_sensors = True
[[sensor_map]]
windGust = wind_gust.*.FOWHx080Packet
windDir = wind_dir.*.FOWHx080Packet
windSpeed = wind_speed.*.FOWHx080Packet
outTemp = temperature.*.FOWHx080Packet
outHumidity = humidity.*.FOWHx080Packet
rain_total = rain_total.*.FOWHx080Packet
#battery = battery.*.FOWHx080Packet
rssi = rssi.*.FOWHx080Packet
snr = snr.*.FOWHx080Packet
noise = noise.*.FOWHx080Packet
I get if i run sudo PYTHONPATH=bin python bin/user/sdr.py --cmd="rtl_433 -f
868.3M -R 32 -F json -M level"
The output is this
out:[u'{"time" : "2021-06-23 14:54:44", "model" : "Fine Offset Electronics
WH1080/WH3080 Weather Station", "msg_type" : 0, "id" : 106, "temperature_C"
: 20.200, "humidity" : 53, "direction_deg" : 225, "speed" : 0.000, "gust" :
1.224, "rain" : 102.000, "battery" : "OK", "mic" : "CRC", "mod" : "ASK",
"freq" : 868.306, "rssi" : -10.221, "snr" : 23.472, "noise" : -33.693}\n',
u'{"time" : "2021-06-23 14:54:44", "model" : "Fine Offset Electronics
WH1080/WH3080 Weather Station", "msg_type" : 0, "id" : 106, "temperature_C"
: 20.200, "humidity" : 53, "direction_deg" : 225, "speed" : 0.000, "gust" :
1.224, "rain" : 102.000, "battery" : "OK", "mic" : "CRC", "mod" : "ASK",
"freq" : 868.305, "rssi" : -10.415, "snr" : 24.739, "noise" : -35.154}\n']
parsed: {'msg_type.106.FOWHx080Packet': 0,
'signal_type.106.FOWHx080Packet': 0, 'temperature.106.FOWHx080Packet':
20.2, 'hours.106.FOWHx080Packet': None, 'wind_gust.106.FOWHx080Packet':
1.224, 'minutes.106.FOWHx080Packet': None, 'dateTime': 1624460084,
'wind_speed.106.FOWHx080Packet': 0.0, 'year.106.FOWHx080Packet': None,
'battery.106.FOWHx080Packet': 0, 'month.106.FOWHx080Packet': None,
'wind_dir.106.FOWHx080Packet': 225.0, 'seconds.106.FOWHx080Packet': None,
'humidity.106.FOWHx080Packet': 53.0, 'day.106.FOWHx080Packet': None,
'usUnits': 16, 'rain_total.106.FOWHx080Packet': 10.2}
In the lines noise, rssi, snr appears but not in the parsed why?
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/dad916b0-3576-44d1-bf5b-d49b676a1fadn%40googlegroups.com.
