Guten Morgen,
ich habe die Fehler während der Installation beseitigt. auch unter
1. airQ_corant.py Zeile 279 'co': ('co', 'milligram_per_meter_cubed',
'group_concentration',lambda x:x[0]),
microgram_per_meter_cubed
2. wie funktioniert das mit dem "prefix"
wird dann co oder co2 zu "prefixco" oder "prefixco2"
Bei einem Rechner war ich erfolgreich mit der Installation.
Danke
Hallo,
I fixed the errors during the installation.
how does that work with that "prefix"
I thank you for the very good work
A note for installing: "Crypto"
$ sudo apt-get install build-essential python3-dev
$ pip3 install pycryptodomex
$ python3 -m Cryptodome.SelfTest
I was successful with the installation on one computer.
Thanks
Hartmut
[email protected] schrieb am Samstag, 17. Juli 2021 um 22:01:22 UTC+2:
> From those logs and the removed messages (I read them before they were
> removed) I am not sure what is the actual state of your installation. Does
> it generally work or not?
>
> In the moment I write a tool to add the necessary columns to the database
> schema. By now the only way is to add the columns using wee_database one by
> one. If you do not set a prefix, some data is already saved to the database
> like pm1_0, pm2_5, and pm10_0.
>
> [email protected] schrieb am Samstag, 17. Juli 2021 um 16:16:21 UTC+2:
>
>> Hallo,
>> by
>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip
>> Request to install 'weewx-airQ.zip'
>> Extracting from zip archive weewx-airQ.zip
>> Traceback (most recent call last):
>> File "./wee_extension", line 88, in <module>
>> main()
>> File "./wee_extension", line 80, in main
>> ext.install_extension(options.install)
>> File "/home/weewx/bin/weecfg/extension.py", line 130, in
>> install_extension
>> self.install_from_dir(extension_dir)
>> File "/home/weewx/bin/weecfg/extension.py", line 150, in
>> install_from_dir
>> installer_path, installer =
>> weecfg.get_extension_installer(extension_dir)
>> File "/home/weewx/bin/weecfg/__init__.py", line 1851, in
>> get_extension_installer
>> __import__('install')
>> File "/var/tmp/weewx-airQ-master/install.py", line 26
>> '#altitude': 'set_if_not_station_altitude'
>> ^
>> SyntaxError: invalid syntax
>>
>> and
>>
>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip
>> Request to install 'weewx-airQ.zip'
>> Extracting from zip archive weewx-airQ.zip
>> Traceback (most recent call last):
>> File "./wee_extension", line 88, in <module>
>> main()
>> File "./wee_extension", line 80, in main
>> ext.install_extension(options.install)
>> File "/home/weewx/bin/weecfg/extension.py", line 130, in
>> install_extension
>> self.install_from_dir(extension_dir)
>> File "/home/weewx/bin/weecfg/extension.py", line 150, in
>> install_from_dir
>> installer_path, installer =
>> weecfg.get_extension_installer(extension_dir)
>> File "/home/weewx/bin/weecfg/__init__.py", line 1858, in
>> get_extension_installer
>> installer = loader()
>> File "/var/tmp/weewx-airQ-master/install.py", line 8, in loader
>> File "/var/tmp/weewx-airQ-master/install.py", line 12, in __init__
>> NameError: name 'GTSInstaller' is not defined
>>
>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip
>> Request to install 'weewx-airQ.zip'
>> Extracting from zip archive weewx-airQ.zip
>> Saving installer file to /home/weewx/bin/user/installer/airQ
>> Saved configuration dictionary. Backup copy at
>> /home/weewx/weewx.conf.20210717161220
>> Finished installing extension 'weewx-airQ.zip'
>>
>> how do i get the data into a database
>>
>> Hartmut
>> [email protected] schrieb am Mittwoch, 14. Juli 2021 um 21:29:41 UTC+2:
>>
>>> Thanks for review Karen. I also found this device uRADMonitor »
>>> Products <https://www.uradmonitor.com/products/> for similar price. Now
>>> the worst part, choose one :)
>>>
>>> st 14. 7. 2021 v 17:10 odesílatel Karen K <[email protected]> napsal:
>>>
>>>> [image: dayPM.png]
>>>> https://github.com/roe-dl/weewx-airQ
>>>>
>>>> The device is specified down to -20°C. So, outside usage is possible,
>>>> if it is protected against rain.
>>>> Karen K schrieb am Sonntag, 11. Juli 2021 um 18:11:39 UTC+2:
>>>>
>>>>> Some time has passed, and finally I can present the first version of a
>>>>> driver (or better: service) to retrieve the data out of the Air-Q device
>>>>> of
>>>>> the Corant GmbH. You will find it there:
>>>>>
>>>>> Service to retrieve data from Air-Q device
>>>>> <https://github.com/roe-dl/weewx-airQ> (at Github)
>>>>> Web site of the Air-Q device <https://www.air-q.com> (including
>>>>> possibility to purchase one)
>>>>>
>>>>> The configuration is simple. The IP address of the device and the
>>>>> password are the only needed parameters. Observations are stored to the
>>>>> appropriate WeeWX observation types automatically.
>>>>>
>>>>> If more than one Air-Q device is used, a name prefix can be prepended
>>>>> to the observation types to distinguish between the devices. That way it
>>>>> is
>>>>> possible to store the observations of more than one device in the same
>>>>> database.
>>>>>
>>>>>
>>>>> --
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "weewx-user" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/weewx-user/ljyMS0EQR4k/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/8049deb7-a33b-4428-bc8c-f22a7a769958n%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/8049deb7-a33b-4428-bc8c-f22a7a769958n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/63c4d8e8-8352-4471-9f2d-919cf771f14dn%40googlegroups.com.
