It can be used by weewx with the Interceptor driver.
https://github.com/matthewwall/weewx-interceptor
The custom server option of the station (it's a Ecowitt WS2320E/WS2350
clone) will be used to send in Ecowitt protocoll to the server (e.g. a RPi).
helpful link: https://www.wxforum.net/index.php?topic=40730.0
I use the same station with weewx
in the weewx.conf in the Interceptor section you need to have the below
entries
##############################################################################
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# ecowitt-client - any hardware that uses the ecowitt protocol
# wu-client - any hardware that uses the weather underground protocol
device_type = ecowitt-client
port = 8000
iface = eth0
# iface = wlan0 if you use a WLAN connection and no Ethernet
####################################
In the WSView app for customized server your entries should be: (tap on
your device in the WSView device lsit)
protocol: Ecowitt
host: your server's IP
path: / (there must be at least a "/" even though weewx doesn't care -
but if there's no path, the station won't send)
port: 8000 (has to correspond to the weewx.conf entry, can be any port
but should be a port which is not used by any other application on your
server)
update interval: 16
press save and wait for the "success" message
that's it - Good luck
If you have more questions, you can PM me - also in German 😉
On 24.07.2021 22:01, webm...@luftfahrtverein-gruenstadt.de wrote:
Hi all,
during an EM special I bought a wifi weather station of type WS980WIFI
(https://de.elv.com/elv-wifi-wetterstation-ws980wifi-inkl-funk-aussensensor-868-mhz-app-pc-auswertesoftware-250408)
Is there any way of using weewx with this station? There is the
possibility of defining an "own" server when configuring the station
where I can provide an IP, the protocol (Wunderground or ecowitt),
ports, etc.
Also I found out that it uses the WS23xx protocol, for what an weewx
extension exsists I think.
Thank you for your help!
Best,,
Sebastian
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to weewx-user+unsubscr...@googlegroups.com
<mailto:weewx-user+unsubscr...@googlegroups.com>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c41ea8a9-a08a-4b6f-8366-b26fe71c7cbfn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/c41ea8a9-a08a-4b6f-8366-b26fe71c7cbfn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/3dbcc544-febb-c367-f438-8b954fd34b77%40gmail.com.
