Update: The sensor was reporting with the simulator. My report was set to US units and the sensor reports C so I used the Calibrate section of Weewx.conf to convert the temp to F. it appears to be working now.
Not sure if that was the best option. On Sunday, July 25, 2021 at 6:00:37 PM UTC-4 [email protected] wrote: > Greetings, > > I'm trying to make a small indoor temperature/humidity station that will > generate a report online. > > - I have an RPi 3 with a DHT22/AM2302 using GPIO22. > - Weewx is running with the Simulator station_type. > - Reports are being generated with NGINX serving them. > - > - sudo tail -f /var/log/syslog generates the following: > > Jul 25 17:28:39 /weewxd: extrasensors: found humidity value of > 41.400001525878906 % > > > Jul 25 17:28:39 /weewxd: extrasensors: found temperature value of > 24.299999237060547 C > > - > - I used eyesnz/weewx_pi_sensors > > So, Weewx is getting the data, but I'm not sure how to get it into the > reporting. I don't have a physical weather sensor and all I want is the > indoor temp/humidity. I'm guessing I need to use some other device/driver > set up than the simulator. I've seen posts with people using > additional/replacement sensors (like the DHT22) but not only using the > DHT22. > > I'm hoping this is a quick-stupid answer. > > Thanks again! > Thom K. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bda1e8cf-f327-4047-9063-2ef4cbc21e5dn%40googlegroups.com.
