Here is what I have currently. It is definitely a work in progress. I'm
subscribing to a broker on a second RPI, which receiving its data from two
SDRs. Additionally goes out on web (Every 5 minutes) to download Alerts.
[MQTTSubscribeService]
# This section is for the MQTTSubscribe service.
# Turn the service on and off.
# Default is: true
# Only used by the service.
enable = true
# The MQTT server.
# Default is localhost.
host = 192.168.1.240
# The port to connect to.
# Default is 1883.
port = 1883
# Maximum period in seconds allowed between communications with the
broker.
# Default is 60.
keepalive = 60
# username for broker authentication.
# Default is None.
username = None
# password for broker authentication.
# Default is None.
password = None
# The binding, loop or archive.
# Default is: loop
# Only used by the service.
binding = loop
# The message handler to use
[[message_callback]]
# The format of the MQTT payload.
# Currently support: individual, json, keyword
# Must be specified.
type = json
# The topics to subscribe to.
[[topics]]
# Units for MQTT payloads without unit value.
# Valid values: US, METRIC, METRICWX
# Default is: US
unit_system = US
# With the exception of wind data, by default a packet is created
for every MQTT message received.
# When this is true, MQTTSubscribe attempts to collect observations
across messages into a packet.
# Default is False.
# This is experimental and may be removed.
collect_observations = True
# With the exception of wind data, by default a queue is created
for every MQTT topic.
# When this is true, MQTTSubsribe uses a single queue for all non
wind data.
# This is useful when 'collect_observations = True'.
# Default is False.
# This is experimental and may be removed.
single_queue = True
##########################################################################################
# Fineoffset-WH51 Sensors
# SDR # 2
# 915 MHz
##########################################################################################
[[[Fineoffset-WH51/00e121/]]]
[[[[model]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_mV]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[boost]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[moisture]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = soilMoist1
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = False
# True if the incoming data is cumulative.
# Valid values: True, False
# Default is False
contains_total = False
# The conversion type necessary for WeeWX compatibility
# Valid values: bool, float, int, none
# Default is float
conversion_type = float
[[[[ad_raw]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[mic]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[mod]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[freq1]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[freq2]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[rssi]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[snr]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[noise]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[Fineoffset-WH51/00e002/]]]
[[[[model]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_mV]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[boost]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[moisture]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = soilMoist2
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = False
# True if the incoming data is cumulative.
# Valid values: True, False
# Default is False
contains_total = False
# The conversion type necessary for WeeWX compatibility
# Valid values: bool, float, int, none
# Default is float
conversion_type = float
[[[[ad_raw]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[mic]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[mod]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[freq1]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[freq2]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[rssi]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[snr]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[noise]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
##########################################################################################
# Acurite-6045M Sensors
# SDR # 1
# 433 MHz
##########################################################################################
[[[Acurite-6045M/247/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning1_frequency
ignore = False
conversion_type = None
[[[Acurite-6045M/121/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning2_frequency
ignore = False
conversion_type = None
[[[Acurite-6045M/207/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning3_frequency
ignore = False
conversion_type = None
[[[Acurite-6045M/147/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning4_frequency
ignore = False
conversion_type = None
[[[Acurite-6045M/228/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning5_frequency
ignore = False
conversion_type = None
[[[Acurite-6045M/14052/]]]
[[[[id]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[battery_ok]]]]
# True if the incoming data should not be processed into
WeeWX.
# Valid values: True, False
# Default is False
ignore = True
[[[[temperature_F]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_temperature_F
ignore = False
contains_total = False
conversion_type = float
[[[[humidity]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_humidity
ignore = False
contains_total = False
conversion_type = float
[[[[strike_count]]]]
ignore = True
[[[[storm_dist]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_storm_dist
ignore = False
contains_total = False
conversion_type = float
[[[[active]]]]
ignore = True
[[[[rfi]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_rfi
ignore = False
contains_total = True
conversion_type = int
[[[[number_strike_count]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_number_strike_count
ignore = False
contains_total = True
conversion_type = int
[[[[lightning_frequency]]]]
# The WeeWX name.
# Default is the name from MQTT.
name = lightning6_frequency
ignore = False
conversion_type = None
##########################################################################################
# Acurite-5n1 Sensors
# SDR # 1
# 433 MHz
##########################################################################################
[[[Acurite-5n1/1531/]]]
# The WeeWX name.
# Default is the name from MQTT.
name = comfort_level
conversion_type = None
##########################################################################################
# NWS Alerts
# GET Method (For County Only)
# Updated Every 5 Minutes
##########################################################################################
[[[Alerts/NWS/]]]
[[[[alert_NWS0]]]]
name = alert_0
conversion_type = None
[[[[alert_NWS1]]]]
name = alert_1
conversion_type = None
[[[[alert_NWS2]]]]
name = alert_2
conversion_type = None
[[[[alert_NWS3]]]]
name = alert_3
conversion_type = None
[[[[alert_NWS4]]]]
name = alert_4
conversion_type = None
[[[[alert_NWS5]]]]
name = alert_5
conversion_type = None
[[[[alert_NWS6]]]]
name = alert_6
conversion_type = None
[[[[alert_NWS7]]]]
name = alert_7
conversion_type = None
[[[[alert_NWS8]]]]
name = alert_8
conversion_type = None
[[[[alert_NWS9]]]]
name = alert_9
conversion_type = None
[[[[alert_NWS10]]]]
name = alert_10
conversion_type = None
On Monday, May 24, 2021 at 8:44:08 PM UTC-4 vince wrote:
> > On Monday, May 24, 2021 at 4:15:22 PM UTC-7 [email protected] wrote:
> >You can provide the configuration data via a pull request, email,
> attachment, etc. - whatever is easiest for you.
>
> Here's my simple example that dials back logging a bit and subscribes to
> pieces of a pre-existing MQTT item...
>
> [Logging]
> [[loggers]]
> [[[user.MQTTSubscribe]]]
> level = INFO
>
> [MQTTSubscribeService]
> enable = True
> host = 192.168.1.171
> port = 1883
> keepalive = 60
> username = None
> password = None
> binding = loop
> [[message_callback]]
> type = json
> [[topics]]
> unit_system = US
>
> #--- these come from r:/usr/local/bin every 5 minutes via cron
> #
> # mosquitto_sub -t BaseballRoomConditions -h nuc2
> # {"dateTime": 1621715702, "extraTemp1": 63.16, "extraTemp2":
> 63.5, "pi": 100.28}
> #
>
> [[[BaseballRoomConditions]]]
> [[[[dateTime]]]]
> ignore = True
> [[[[extraTemp1]]]]
> name = extraTemp1
> units = degree_F
> [[[[extraTemp2]]]]
> name = extraTemp2
> units = degree_F
> [[[[pi]]]]
> ignore = True
>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/6a50d5a6-9d0b-4d65-b73a-2475dc60305dn%40googlegroups.com.
