Vielen Dank erst einmal für den Fehlerhinweis in install.py.
[email protected] schrieb am Samstag, 4. September 2021 um 16:07:17 UTC+2:
> Nach Umstellung auf Mysql
> Sep 4 15:40:59 ba001 weewx[24174]: Starting weewx weather system: weewx.
> Sep 4 15:40:59 ba001 systemd[1]: Started LSB: weewx weather system.
> Sep 4 15:41:00 ba001 weewx[24187] INFO user.airQ: air-Q 0.7 initialize
> units
> Sep 4 15:41:00 ba001 weewx[24187] INFO user.airQ: device 'first_device':
> observation group dict {'og_Temp': 'group_temperature', 'og_Humidity':
> 'group_percent', 'og_HumAbs': 'group_concentration', 'og_Dewpoint':
> 'group_temperature', 'og_Pressure': 'group_pressure', 'og_Altimeter':
> 'group_pressure', 'og_Barometer': 'group_pressure', 'og_co_m':
> 'group_concentration', 'og_co': 'group_fraction', 'og_co2':
> 'group_fraction', 'og_h2s': 'group_concentration', 'og_no2_m':
> 'group_concentration', 'og_no2': 'group_fraction', 'og_pm1_0':
> 'group_concentration', 'og_pm2_5': 'group_concentration', 'og_pm10_0':
> 'group_concentration', 'og_o3_m': 'group_concentration', 'og_o3':
> 'group_fraction', 'og_so2_m': 'group_concentration', 'og_so2':
> 'group_fraction', 'og_TVOC': 'group_fraction', 'og_o2': 'group_percent',
> 'og_noise': 'group_db', 'og_PerfIdx': 'group_percent', 'og_HealthIdx':
> 'group_percent', 'og_cnt0_3': 'group_count', 'og_cnt0_5': 'group_count',
> 'og_cnt1_0': 'group_count', 'og_cnt2_5': 'group_count', 'og_cnt5_0':
> 'group_count', 'og_cnt10_0': 'group_count', 'og_Temp_e': 'group_percent'}
> Sep 4 15:41:00 ba001 weewx[24187] INFO user.airQ: device 'second_device':
> observation group dict {'eg_Temp': 'group_temperature', 'eg_Humidity':
> 'group_percent', 'eg_HumAbs': 'group_concentration', 'eg_Dewpoint':
> 'group_temperature', 'eg_Pressure': 'group_pressure', 'eg_Altimeter':
> 'group_pressure', 'eg_Barometer': 'group_pressure', 'eg_co_m':
> 'group_concentration', 'eg_co': 'group_fraction', 'eg_co2':
> 'group_fraction', 'eg_h2s': 'group_concentration', 'eg_no2_m':
> 'group_concentration', 'eg_no2': 'group_fraction', 'eg_pm1_0':
> 'group_concentration', 'eg_pm2_5': 'group_concentration', 'eg_pm10_0':
> 'group_concentration', 'eg_o3_m': 'group_concentration', 'eg_o3':
> 'group_fraction', 'eg_so2_m': 'group_concentration', 'eg_so2':
> 'group_fraction', 'eg_TVOC': 'group_fraction', 'eg_o2': 'group_percent',
> 'eg_noise': 'group_db', 'eg_PerfIdx': 'group_percent', 'eg_HealthIdx':
> 'group_percent', 'eg_cnt0_3': 'group_count', 'eg_cnt0_5': 'group_count',
> 'eg_cnt1_0': 'group_count', 'eg_cnt2_5': 'group_count', 'eg_cnt5_0':
> 'group_count', 'eg_cnt10_0': 'group_count', 'eg_Temp_e': 'group_percent'}
> Sep 4 15:41:00 ba001 weewx[24187] INFO user.airQ: air-Q 0.7 service
> Sep 4 15:41:00 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> host address '192.168.38.18' prefix 'og' query interval 5.0 s altitude 54 m
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> device id: 99...02a
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> firmware version: 1.20.2.r4_D_1.75
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> sensors: ['co', 'co2', 'no2', 'o3', 'oxygen', 'particulates', 'pressure',
> 'so2', 'sound', 'temperature', 'tvoc', 'humidity', 'humidity_abs', 'dewpt']
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> concentration units config: µg/m^3
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: thread 'first_device',
> host '192.168.38.18': initialized
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'first_device'
> QFF calculation temperature source: outTemp
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: thread 'first_device',
> host '192.168.38.18': starting
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> host address '192.168.38.19' prefix 'eg' query interval 5.0 s altitude 54 m
> Sep 4 15:41:01 ba001 weewx[24187] INFO user.airQ: thread 'first_device',
> host '192.168.38.18': 200 - OK
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> device id: 21...063
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> firmware version: 1.20.2.r4_D_1.75
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> sensors: ['co', 'co2', 'no2', 'particulates', 'pressure', 'sound',
> 'temperature', 'tvoc', 'humidity', 'humidity_abs', 'dewpt']
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> concentration units config: µg/m^3
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: thread 'second_device',
> host '192.168.38.19': initialized
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: device 'second_device'
> QFF calculation temperature source: outTemp
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: thread 'second_device',
> host '192.168.38.19': starting
> Sep 4 15:41:02 ba001 weewx[24187] INFO user.airQ: 2 air-Q devices found
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: StdConvert target
> unit is 0x10
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.wxservices: StdWXCalculate
> will use data binding wx_binding
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: Archive will use
> data binding wx_binding
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: Record generation
> will be attempted in 'hardware'
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: Using archive
> interval of 300 seconds (specified in weewx configuration)
> Sep 4 15:41:02 ba001 weewx[24187] INFO __main__: Starting up weewx
> version 4.6.0b1
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: Using binding
> 'wx_binding' to database 'weeAirQxHaus'
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.manager: Starting backfill
> of daily summaries
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.manager: Daily summaries up
> to date
> Sep 4 15:41:02 ba001 weewx[24187] INFO weewx.engine: Starting main packet
> loop.
> Sep 4 15:41:03 ba001 weewx[24187] INFO user.airQ: thread 'second_device',
> host '192.168.38.19': 200 - OK
> Sep 4 15:45:38 ba001 weewx[24187] INFO weewx.manager: Added record
> 2021-09-04 15:45:00 CEST (1630763100) to database 'weeAirQxHaus'
> Sep 4 15:45:38 ba001 weewx[24187] INFO weewx.manager: Added record
> 2021-09-04 15:45:00 CEST (1630763100) to daily summary in 'weeAirQxHaus'
>
> Sep 4 15:45:50 ba001 weewx[24187] INFO weewx.reportengine: Using
> localization file /home/weewx/skins/airQ/lang/de.conf for report
> 'airqReport'
> Sep 4 15:45:51 ba001 weewx[24187] INFO weewx.cheetahgenerator: Generated
> 3 files for report airqReport in 1.27 seconds
> Sep 4 15:45:55 ba001 weewx[24187] INFO weewx.imagegenerator: Generated 27
> images for report airqReport in 3.43 seconds
> Sep 4 15:45:55 ba001 weewx[24187] INFO weewx.reportengine: Copied 5 files
> to /home/weewx/public_html/airQ
>
> Danke es läuft fast vollständig.
>
> Eine Anmerkung "Luftdruck" Barometer wird nicht berechnent, ich habe keine
> Daten für "outTemp" in der Datenbank habe.
>
> Schön wenn auch die Fehlerwerte mit gespeichert werden könnten
> "oxygen": [20.123, 0.87], val[0] = Wert, val[1] = Fehler in %
> "dewpt": [13.825, 0.8], val[0] = Wert, val[1] = Fehler in %
> "pm10": [14, 11], val[0] = Wert, val[1] = Fehler in %
>
> Vielen Dank
> Hartmut
>
> [email protected] schrieb am Samstag, 4. September 2021 um 15:36:55 UTC+2:
>
>> Hallo,
>> nach DB-Löschung und Neustart alles IO bis auf db-Generierung durch
>> airq_conf.py
>> Ich habe einfach per Hand eine neue SCHEMA Vorlage erstellt
>> ('og_Temp', 'REAL'),
>> ('og_Humidity', 'REAL'),
>> ('og_HumAbs', 'REAL'),
>> ('og_Dewpoint', 'REAL'),
>> ('og_Pressure', 'REAL'),
>> ('og_Altimeter', 'REAL'),
>> ('og_Barometer', 'REAL'),
>> ('og_co_m', 'REAL'),
>> ('og_co', 'REAL'),
>> ('og_co2', 'REAL'),
>> ('og_h2s', 'REAL'),
>> ('og_no2', 'REAL'),
>> ('og_pm1_0', 'REAL'),
>> ('og_pm2_5', 'REAL'),
>> ....
>> ('eg_PerfIdx', 'REAL'),
>> ('eg_HealthIdx', 'REAL'),
>> ('eg_cnt0_3', 'REAL'),
>> ('eg_cnt0_5', 'REAL'),
>> ('eg_cnt1_0', 'REAL'),
>> ('eg_cnt2_5', 'REAL'),
>> ('eg_cnt5_0', 'REAL'),
>> ('eg_cnt10_0', 'REAL'),
>> ('eg_TypPS', 'REAL'),
>> ('eg_Battery', 'REAL'),
>> ('eg_DoorEvent', 'REAL'),
>> ('eg_HumAbsDelta', 'REAL'),
>> ('eg_CO2delta', 'REAL'),
>> mit eine SQLITE-Datenbank läuft es mit zwei airQ's einer im Obergeschoss
>> und einer im Erdgeschoss.
>> Ich muss eine kleine Änderung eingestehen
>> in install.py
>>
>> files=[('bin/user', ['bin/user/airQ_corant.py','bin/user/airq_conf.py'] )
>> ,
>> ('bin', ['bin/airq_conf'])]
>>
>> ein ")" eingefügt.
>>
>> Hartmut
>> [email protected] schrieb am Samstag, 4. September 2021 um 15:12:46
>> UTC+2:
>>
>>> Ja gibt es!
>>>
>>> [email protected] schrieb am Samstag, 4. September 2021 um 15:10:11
>>> UTC+2:
>>>
>>>> Gibt es den Eintrag user.airQ_corant.AirqUnits in der Zeile
>>>> prep_services?
>>>>
>>>> [email protected] schrieb am Samstag, 4. September 2021 um 12:32:26
>>>> UTC+2:
>>>>
>>>>> Hallo,
>>>>> der Hinweis mit /lang in /Seasons war Gold wert.
>>>>> Und hier der Auszug aus weewx.conf
>>>>> [airQ]
>>>>>
>>>>> [[first_device]]
>>>>> host = 192.168.38.18
>>>>> password = passwd
>>>>> prefix = og
>>>>> #altitude = set_if_not_station_altitude
>>>>>
>>>>> [[second_device]]
>>>>> host = 192.168.38.19
>>>>> password = passwd
>>>>> prefix = eg
>>>>> #altitude = set_if_not_station_altitude
>>>>>
>>>>> Jetzt kommt:
>>>>> Sep 4 12:25:44 ba001 weewx[11803] INFO weewx.reportengine: Using
>>>>> localization file /home/weewx/skins/airQ/lang/de.conf for report
>>>>> 'airqReport'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> Generate failed with exception '<class 'NameMapper.NotFound'>'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Ignoring template /home/weewx/skins/airQ/first_device.html.tmpl
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Reason: cannot find 'milligram_per_meter_cubed' while searching for
>>>>> 'current.og_co.milligram_per_meter_cubed'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Traceback (most recent call last):
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** File "/home/weewx/bin/weewx/cheetahgenerator.py", line 332, in
>>>>> generate
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** unicode_string = compiled_template.respond()
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** File "_home_weewx_skins_airQ_first_device_html_tmpl.py", line
>>>>> 328,
>>>>> in respond
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> NameMapper.NotFound: cannot find 'milligram_per_meter_cubed' while
>>>>> searching for 'current.og_co.milligram_per_meter_cubed'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> Generate failed with exception '<class 'NameMapper.NotFound'>'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Ignoring template /home/weewx/skins/airQ/second_device.html.tmpl
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Reason: cannot find 'milligram_per_meter_cubed' while searching for
>>>>> 'current.eg_co.milligram_per_meter_cubed'
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> Traceback (most recent call last):
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** File "/home/weewx/bin/weewx/cheetahgenerator.py", line 332, in
>>>>> generate
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** unicode_string = compiled_template.respond()
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator:
>>>>> **** File "_home_weewx_skins_airQ_second_device_html_tmpl.py", line
>>>>> 328,
>>>>> in respond
>>>>> Sep 4 12:25:45 ba001 weewx[11803] ERROR weewx.cheetahgenerator: ****
>>>>> NameMapper.NotFound: cannot find 'milligram_per_meter_cubed' while
>>>>> searching for 'current.eg_co.milligram_per_meter_cubed'
>>>>>
>>>>> Nach Neustart
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: CPU
>>>>> variant: 0x0
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: CPU part:
>>>>> 0xc07
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: CPU
>>>>> revision: 4
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: Hardware:
>>>>> Allwinner sun7i (A20) Family
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: Revision:
>>>>> 0000
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.cmon: cpuinfo: Serial:
>>>>> 1651660f08c142bc
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.airQ: air-Q 0.7
>>>>> initialize units
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device': observation group dict {'og_Temp': 'group_temperature',
>>>>> 'og_Humidity': 'group_percent', 'og_HumAbs': 'group_concentration',
>>>>> 'og_Dewpoint': 'group_temperature', 'og_Pressure': 'group_pressure',
>>>>> 'og_Altimeter': 'group_pressure', 'og_Barometer': 'group_pressure',
>>>>> 'og_co_m': 'group_concentration', 'og_co': 'group_fraction', 'og_co2':
>>>>> 'group_fraction', 'og_h2s': 'group_concentration', 'og_no2_m':
>>>>> 'group_concentration', 'og_no2': 'group_fraction', 'og_pm1_0':
>>>>> 'group_concentration', 'og_pm2_5': 'group_concentration', 'og_pm10_0':
>>>>> 'group_concentration', 'og_o3_m': 'group_concentration', 'og_o3':
>>>>> 'group_fraction', 'og_so2_m': 'group_concentration', 'og_so2':
>>>>> 'group_fraction', 'og_TVOC': 'group_fraction', 'og_o2': 'group_percent',
>>>>> 'og_noise': 'group_db', 'og_PerfIdx': 'group_percent', 'og_HealthIdx':
>>>>> 'group_percent', 'og_cnt0_3': 'group_count', 'og_cnt0_5': 'group_count',
>>>>> 'og_cnt1_0': 'group_count', 'og_cnt2_5': 'group_count', 'og_cnt5_0':
>>>>> 'group_count', 'og_cnt10_0': 'group_count'}
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device': observation group dict {'eg_Temp': 'group_temperature',
>>>>> 'eg_Humidity': 'group_percent', 'eg_HumAbs': 'group_concentration',
>>>>> 'eg_Dewpoint': 'group_temperature', 'eg_Pressure': 'group_pressure',
>>>>> 'eg_Altimeter': 'group_pressure', 'eg_Barometer': 'group_pressure',
>>>>> 'eg_co_m': 'group_concentration', 'eg_co': 'group_fraction', 'eg_co2':
>>>>> 'group_fraction', 'eg_h2s': 'group_concentration', 'eg_no2_m':
>>>>> 'group_concentration', 'eg_no2': 'group_fraction', 'eg_pm1_0':
>>>>> 'group_concentration', 'eg_pm2_5': 'group_concentration', 'eg_pm10_0':
>>>>> 'group_concentration', 'eg_o3_m': 'group_concentration', 'eg_o3':
>>>>> 'group_fraction', 'eg_so2_m': 'group_concentration', 'eg_so2':
>>>>> 'group_fraction', 'eg_TVOC': 'group_fraction', 'eg_o2': 'group_percent',
>>>>> 'eg_noise': 'group_db', 'eg_PerfIdx': 'group_percent', 'eg_HealthIdx':
>>>>> 'group_percent', 'eg_cnt0_3': 'group_count', 'eg_cnt0_5': 'group_count',
>>>>> 'eg_cnt1_0': 'group_count', 'eg_cnt2_5': 'group_count', 'eg_cnt5_0':
>>>>> 'group_count', 'eg_cnt10_0': 'group_count'}
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.airQ: air-Q 0.7 service
>>>>> Sep 4 12:29:53 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' host address '192.168.38.18' prefix 'og' query interval
>>>>> 5.0
>>>>> s altitude 54 m
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' device id: 99...2a
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' firmware version: 1.20.2.r4_D_1.75
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' sensors: ['co', 'co2', 'no2', 'o3', 'oxygen',
>>>>> 'particulates', 'pressure', 'so2', 'sound', 'temperature', 'tvoc',
>>>>> 'humidity', 'humidity_abs', 'dewpt']
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' concentration units config: µg/m^3
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'first_device', host '192.168.38.18': initialized
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'first_device' QFF calculation temperature source: outTemp
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'first_device', host '192.168.38.18': starting
>>>>> Sep 4 12:29:54 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' host address '192.168.38.19' prefix 'eg' query interval
>>>>> 5.0
>>>>> s altitude 54 m
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'first_device', host '192.168.38.18': 200 - OK
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' device id: 21...63
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' firmware version: 1.20.2.r4_D_1.75
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' sensors: ['co', 'co2', 'no2', 'particulates', 'pressure',
>>>>> 'sound', 'temperature', 'tvoc', 'humidity', 'humidity_abs', 'dewpt']
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' concentration units config: µg/m^3
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'second_device', host '192.168.38.19': initialized
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: device
>>>>> 'second_device' QFF calculation temperature source: outTemp
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'second_device', host '192.168.38.19': starting
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO user.airQ: 2 air-Q devices
>>>>> found
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: StdConvert
>>>>> target unit is 0x10
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.wxservices:
>>>>> StdWXCalculate will use data binding wx_binding
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: Archive will use
>>>>> data binding wx_binding
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: Record
>>>>> generation will be attempted in 'hardware'
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: Using archive
>>>>> interval of 300 seconds (specified in weewx configuration)
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO __main__: Starting up weewx
>>>>> version 4.6.0b1
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: Using binding
>>>>> 'wx_binding' to database 'weeAirQxHaus'
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.manager: Starting
>>>>> backfill of daily summaries
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.manager: Daily summaries
>>>>> up to date
>>>>> Sep 4 12:29:55 ba001 weewx[12149] INFO weewx.engine: Starting main
>>>>> packet loop.
>>>>> Sep 4 12:29:56 ba001 weewx[12149] INFO user.airQ: thread
>>>>> 'second_device', host '192.168.38.19': 200 - OK
>>>>>
>>>>> Danke
>>>>> Hartmut
>>>>> [email protected] schrieb am Samstag, 4. September 2021 um 10:41:08
>>>>> UTC+2:
>>>>>
>>>>>> Ich sehe es mir an, bitte aber noch um etwas Geduld.
>>>>>>
>>>>>> Folgende Punkte vorab:
>>>>>>
>>>>>> - Bei WeeWX 4.6 (im Gegensatz zu 4.5) sollte es ein Verzeichnis
>>>>>> /home/weewx/skins/Seasons/lang geben, das mehrere Dateien mit
>>>>>> .conf am Ende (darunter de.conf) enthält. Wenn nicht, bitte von
>>>>>> Github herunterladen und dahin kopieren.
>>>>>> - In /home/weewx/weewx.conf muß es im Abschnitt [[Seasons]] einen
>>>>>> Eintrag "lang = de" geben. Den gab es früher nicht, also muß er
>>>>>> ergänzt werden. Dann bitte prüfen, ob die Seasons-Skin noch richtig
>>>>>> erzeugt
>>>>>> wird.
>>>>>> - Die Abschnitte für die einzelnen airQs können sprechende Namen
>>>>>> haben. Das muß nicht "first_device" usw. sein. Das kann der
>>>>>> Aufstellort des
>>>>>> Gerätes sein.
>>>>>>
>>>>>> Hilfreich wäre noch der Abschnitt [airQ] aus /home/weewx/weewx.conf.
>>>>>>
>>>>>> [email protected] schrieb am Samstag, 4. September 2021 um 08:32:24
>>>>>> UTC+2:
>>>>>>
>>>>>>> Guten Morgen,
>>>>>>> ich habe versucht zwei airQ's hinzuzufügen.
>>>>>>> Ich verwende weewx 4.6.0.b1
>>>>>>> mit Pythin 3.9
>>>>>>> Debian Bullseye auf einem BananaPi
>>>>>>>
>>>>>>> als Driver habe ich "cmon" eingesetzt sonst wird die Datenbank
>>>>>>> einfach zu groß
>>>>>>> cmon.sdb ist eingerichtet dann der Versuch
>>>>>>> 1.
>>>>>>> root@ba001:/home/weewx/bin# ./airq_conf --device=first_device
>>>>>>> --add-columns
>>>>>>> Using configuration file /home/weewx/weewx.conf
>>>>>>> Adding columns for device 'first_device', prefix 'og'
>>>>>>> Traceback (most recent call last):
>>>>>>> File "/home/weewx/bin/./airq_conf", line 6, in <module>
>>>>>>> user.airq_conf.main()
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 154, in main
>>>>>>> addDropColumns(config_dict, db_binding, device, action_add,
>>>>>>> action_drop)
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 214, in
>>>>>>> addDropColumns
>>>>>>> schema = manager_dict.get('schema',{}).get('table',{})
>>>>>>> AttributeError: 'list' object has no attribute 'get'
>>>>>>>
>>>>>>> root@ba001:/home/weewx/bin# ./airq_conf --device=second_device
>>>>>>> --add-columns
>>>>>>> Using configuration file /home/weewx/weewx.conf
>>>>>>> Adding columns for device 'second_device', prefix 'eg'
>>>>>>> Traceback (most recent call last):
>>>>>>> File "/home/weewx/bin/./airq_conf", line 6, in <module>
>>>>>>> user.airq_conf.main()
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 154, in main
>>>>>>> addDropColumns(config_dict, db_binding, device, action_add,
>>>>>>> action_drop)
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 214, in
>>>>>>> addDropColumns
>>>>>>> schema = manager_dict.get('schema',{}).get('table',{})
>>>>>>> AttributeError: 'list' object has no attribute 'get'
>>>>>>>
>>>>>>> 2.
>>>>>>> root@ba001:/home/weewx/bin# ./airq_conf --create-skin
>>>>>>> Using configuration file /home/weewx/weewx.conf
>>>>>>> device 'first_device':
>>>>>>> sensors ['co', 'co2', 'no2', 'o3', 'oxygen', 'particulates',
>>>>>>> 'pressure', 'so2', 'sound', 'temperature', 'tvoc', 'humidity',
>>>>>>> 'humidity_abs', 'dewpt']
>>>>>>> obstypes in database []
>>>>>>> device 'second_device':
>>>>>>> sensors ['co', 'co2', 'no2', 'particulates', 'pressure', 'sound',
>>>>>>> 'temperature', 'tvoc', 'humidity', 'humidity_abs', 'dewpt']
>>>>>>> obstypes in database []
>>>>>>> Seasons skin path: /home/weewx/skins/Seasons
>>>>>>> airQ skin path: /home/weewx/skins/airQ
>>>>>>> Seasons skin lang: None
>>>>>>> '/home/weewx/skins/airQ' already exists, contents will be overwritten
>>>>>>> copy seasons.css
>>>>>>> copy seasons.js
>>>>>>> copy favicon.ico
>>>>>>> font directory already exists
>>>>>>> copy OpenSans-Regular.ttf
>>>>>>> copy OpenSans.woff
>>>>>>> copy OpenSans-Bold.ttf
>>>>>>> copy OpenSans.woff2
>>>>>>> copy Kanit-Bold.ttf
>>>>>>> copy license.txt
>>>>>>> copy OFL.txt
>>>>>>> copy Kanit-Regular.ttf
>>>>>>> language directory already exists
>>>>>>> creating skin file '/home/weewx/skins/airQ/skin.conf'
>>>>>>> writing section [CheetahGenerator]
>>>>>>> writing section [CopyGenerator]
>>>>>>> writing section [ImageGenerator]
>>>>>>> writing section [Generators]
>>>>>>> done.
>>>>>>> no language defined
>>>>>>> Traceback (most recent call last):
>>>>>>> File "/home/weewx/bin/./airq_conf", line 6, in <module>
>>>>>>> user.airq_conf.main()
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 152, in main
>>>>>>> createSkin(config_path,config_dict, db_binding)
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 664, in createSkin
>>>>>>> airqlang =
>>>>>>> SkinLanguage(seasons_skin_path,airq_skin_path,seasons_lang)
>>>>>>> File "/home/weewx/bin/user/airq_conf.py", line 805, in __init__
>>>>>>> if os.path.isfile(self.seasons_lang_path):
>>>>>>> File "/usr/lib/python3.9/genericpath.py", line 30, in isfile
>>>>>>> st = os.stat(path)
>>>>>>> TypeError: stat: path should be string, bytes, os.PathLike or
>>>>>>> integer, not NoneType
>>>>>>>
>>>>>>> 3. jedoch
>>>>>>> root@ba001:/home/weewx/bin# ./airq_conf --device=second_device
>>>>>>> --set-location=53.605963,11.341407
>>>>>>> Using configuration file /home/weewx/weewx.conf
>>>>>>> device 'second_device' host '192.168.38.19' set {'geopos': {'lat':
>>>>>>> 53.605963, 'long': 11.341407}}
>>>>>>> Are you sure you want to proceed (y/n)?y
>>>>>>> id: 21...63
>>>>>>> content: Success: new setting saved for key 'geopos': {'lat':
>>>>>>> 53.60597, 'long': 11.34141}
>>>>>>> und
>>>>>>> root@ba001:/home/weewx/bin# ./airq_conf --device=second_device
>>>>>>> --set-ntp=de
>>>>>>> Using configuration file /home/weewx/weewx.conf
>>>>>>> device 'second_device' host '192.168.38.19' set {'TimeServer': '
>>>>>>> ptbtime3.ptb.de'}
>>>>>>> Are you sure you want to proceed (y/n)?y
>>>>>>> id: 21..63
>>>>>>> content: Success: new setting saved for key 'TimeServer':
>>>>>>> ptbtime3.ptb.de
>>>>>>> erfolgreich
>>>>>>>
>>>>>>> Ich bitte um Hilfe
>>>>>>>
>>>>>>> Hartmut
>>>>>>>
>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/86368440-dd28-4204-ade2-19f57896cb85n%40googlegroups.com.
