Hi, There are two means of having WeeWX generate gauge-data.txt; one is via the SteelSeries skin and the other is via the real-time gauge data extension. The former generates gauge-data.txt no quicker than every archive interval the latter up to every ‘loop interval’. It sounds like you may be using the former. It would help to know what you have installed and enabled. Could you please set debug = 1 in weewx.conf and then restart WeeWX. Let WeeWX run for at least two archive intervals and then post the log showing the full WeeWX startup through until the two archive intervals have passed.nThat will tell us exactly what your install is doing.
Gary On Tuesday, 7 September 2021 at 08:03:42 UTC+10 Marty b wrote: > Hello everyone, > > I am trying to figure out how to get gauge-data.txt to update each time a > loop packet is received. Currently it only updates at the same interval as > the rest of the weewx files (~every 10 minutes). I looked at the wiki page > for extension, but the section for ' Changing how often *gauge-data.txt* > is generated' says ' To be written.' > > Any help would be appreciated. > > Thanks! > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8b563cf5-28a4-46bb-974f-84918966b988n%40googlegroups.com.
