Andy,
sorry for the delay ,
here is the config i use
[Interceptor]
driver = user.interceptor
device_type = wu-client
mode = sniff
iface = eth1
pcap_filter = src 192.168.30.166 and dst port 80
and i get this error
Sep 10 19:02:35 debian weewx[1749] DEBUG weewx.engine: Loading service
weewx.engine.StdPrint
Sep 10 19:02:35 debian weewx[1749] DEBUG weewx.engine: Finished
loading service weewx.engine.StdPrint
Sep 10 19:02:35 debian weewx[1749] DEBUG weewx.engine: Loading service
weewx.engine.StdReport
Sep 10 19:02:35 debian weewx[1749] DEBUG weewx.engine: Finished
loading service weewx.engine.StdReport
Sep 10 19:02:35 debian weewx[1749] INFO __main__: Starting up weewx
version 4.5.1
Sep 10 19:02:35 debian weewx[1749] DEBUG weewx.engine: Station does
not support reading the time
Sep 10 19:02:35 debian weewx[1749] INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
Sep 10 19:02:35 debian weewx[1749] INFO weewx.manager: Starting
backfill of daily summaries
Sep 10 19:02:35 debian weewx[1749] INFO weewx.manager: Daily summaries
up to date
Sep 10 19:02:35 debian weewx[1749] INFO weewx.engine: Starting main packet loop.
Sep 10 19:02:45 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:02:55 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:03 debian snmpd[448]: error on subcontainer 'ia_addr' insert (-1)
Sep 10 19:03:05 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:15 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:25 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:33 debian snmpd[448]: error on subcontainer 'ia_addr' insert (-1)
Sep 10 19:03:35 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:45 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:03:55 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:04:03 debian snmpd[448]: error on subcontainer 'ia_addr' insert (-1)
Sep 10 19:04:05 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:04:15 debian weewx[1749] DEBUG user.interceptor: empty queue
Sep 10 19:04:25 debian weewx[1749] DEBUG user.interceptor: empty queue
I have bonded both nic's on my debian box and still no luck
On Thu, Sep 9, 2021 at 7:51 AM Andy <[email protected]> wrote:
> I would use the SDR driver and a cheap dongle, but that is not what you
> are asking about. Make sure to read this
> <https://github.com/matthewwall/weewx-interceptor>. Can you post the
> weewx.conf [Interceptor] section? Are you creating a network bridge on your
> debian machine with the Access connected to one interface? Need more info
> on your setup.
>
> Andy
>
>
>
> On Wednesday, September 8, 2021 at 6:19:34 AM UTC-7 [email protected]
> wrote:
>
>> OK so i have found some info in the group but not specific -- so here is
>> the issue
>>
>> cannot get data
>>
>> here is the setup
>>
>> Atlas with Access reporting to WU no problem
>>
>> Access IP = 192.168.1.166 ( can see its webpage )
>>
>> weewx installed on Debian 10
>> Debian 10 is a VM 192.168.30.216 on a Hyper V host 192.168.30.19
>> The Hyper V host has 2 physical network adapters
>> The Debian machine has 2 network adapters assigned to it
>> The Debian machine can ping and see the webpage for ACCESS 192.168.1.166
>>
>>
>> which method should i use?
>> WU-CLIENT
>> ACURITE-BRIDGE
>> OBSERVER
>>
>> ???
>>
>> I have tried all 3 and for each one i get this error
>>
>>
>> sublyime@debian:/etc/weewx$ sudo tail -f /var/log/syslog
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> self._server = Consumer.TCPServer(address, port, handler)
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/user/interceptor.py", line 584, in __init__
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> TCPServer.__init__(self, (address, int(port)), handler)
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> File "/usr/lib/python3.7/socketserver.py", line 452, in __init__
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> self.server_bind()
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> File "/usr/lib/python3.7/socketserver.py", line 466, in server_bind
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> self.socket.bind(self.server_address)
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL weewx.engine: ****
>> OSError: [Errno 98] Address already in use
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL __main__: Unable to load
>> driver: [Errno 98] Address already in use
>> Sep 8 07:37:10 debian weewx[5617] CRITICAL __main__: **** Exiting...
>>
>>
>> any help would be great
>>
>> Thanks in advance
>>
>>
>>
>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/6t4IeOKz86c/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/dd38fabf-b681-43d1-8535-9acaac19c61an%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/dd38fabf-b681-43d1-8535-9acaac19c61an%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAGh-d_Z8SxMh-h-nqs7_XV_ivcKZ8ouLiUhmjkZxAQs-iAv9SA%40mail.gmail.com.
