Hello Gary, thank you for your fast reply! Your hint did the trick! I removed gw1000 from the service stanza and now I am up and running again.
Thank you very much! Kind regards Tobias T Kolb schrieb am Donnerstag, 21. Oktober 2021 um 13:58:57 UTC+2: > Hello all, > > I just upgraded my hardware to a Froggit DP1500 after a hardware defect on > an old FineOffset WH1080 running for over ten years without problems. > > I installed the gw1000 driver as described on > https://github.com/gjr80/weewx-gw1000. > The driver test was just running fine, but when starting weewx it was > crashing after a short time. > > So I decided to do an upgrade from raspian stretch to buster along with > upgrading to python3 running on an old Raspberry Pi Model B Rev 2. > > Unfortunately weewx is still crashing after reading the actual values from > the hardware. > Attached you will find the syslog as well as the weewx configuration. > > Any help would be greatly appreciated! > > Kind regards > Tobias > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5d1e75bc-babc-4d93-8a31-313dbde182fan%40googlegroups.com.
