Ok, understand. The field map maps GW1000 sourced data to field names that will appear in loop packets from the driver. WeeWX accumulates data from those loop packets and synthesises archive records. The archive records will have the same field names as the loop packets. WeeWX then saves the archive record data to database, but the only data that is saved is that which is in fields that are common to the archive record and the database schema. So if the database schema has a field named outTemp outTemp data from the archive record will be saved to database. If database schema has no field named wh57_batt wh57_batt will NOT be saved to database.
It sounds likes the part you are missing is having the database schema include the same field names as the additional archive record data fields you are trying to save. The ‘Customizing the database’ link I provided should help. Gary On Friday, 29 October 2021 at 21:29:57 UTC+10 Evan Kimberly wrote: > Hi Gary, > > Thanks for your answer. I think it has clarified something for me. I > assumed the field map defined the fields in the archive database, and it > appears I am wrong. The lightning data I'm missing includes detection time > and count (not strike count but total), and those fields do not appear in > the archive. Same with the battery and signal fields. I will try running > weewx directly to view loop packets and archive records for myself, as well > as reading up on customizing the database. > > Thanks, as always, for the help. I think you have pointed me in the right > direction. Sorry for my lack of understanding! > > On Fri, Oct 29, 2021, 2:09 AM gjr80 <[email protected]> wrote: > >> Hi, >> >> I am a little perplexed as to what your lightning data problem is. You >> say you are having no luck in having WeeWX display data from your lightning >> detector but you then go on to say that the GW1000 driver is displaying >> lighting data both via --live-data and --test-driver, the lightning data >> is being populated in your archive and your skin is displaying lightning >> data. Sounds to me like your lightning data is being processed and >> displayed as it should. >> >> You mention that you have no battery or signal strength fields, is this >> for your lightning detector? If so when you ran the GW1000 driver directly >> with --live-data and --test-driver did you see fields wh57_batt and >> wh57_sig? If so did they contain expected data? Did you run WeeWX >> directly <http://weewx.com/docs/usersguide.htm#Running_directly> and >> note if the missing battery and signal data is in the loop packets and >> archive records? (When running WeeWX directly you will see loop packets and >> archive records displayed on the console; loop packets indicated by lines >> starting with LOOP: and archive records on lines starting with REC:). If >> you are seeing wh57_batt and wh57_sig in archive records then the driver >> and WeeWX are working as they should. What are your trying to do with the >> battery and signal data? If you wish to display the current value then >> there is nothing you need do to WeeWX or the GW1000 driver, though you may >> need to modify your skin to display the data (I am afraid I cannot help >> with the Belchertown skin). If you wish to to display historical/aggregate >> data or plot either/both you will need to have WeeWX store your battery and >> signal data in your archive.This can be done by altering your database >> schema to include wh57_batt and wh57_sig (these fields are not included >> in any of the supplied database schemas, you need to add them yourself - >> refer to the section Customizing the database >> <http://weewx.com/docs/customizing.htm#archive_database> in the >> Customization Guide) or by altering the GW1000 driver mapping to map those >> fields to appropriate fields that already exist in your database schema. >> Once you have the data in your archive you then (may) need to alter your >> skin to display the data. >> >> Gary >> On Friday, 29 October 2021 at 13:31:57 UTC+10 Evan Kimberly wrote: >> >>> Hello, >>> >>> I have been trying to set up my lightning detector to display data in >>> weewx and not having any luck. I started digging and it appears that my >>> archive does not have the appropriate fields populated for the field map. >>> >>> When I run the driver with the --default-map command I see the >>> appropriate field map, as detailed on the driver wiki page. >>> >>> When I run the --live-data command, I see my lightning data (plus the >>> rest of my data) as produced by the GW1000, in ecowitt notation. >>> >>> When I run the --test-driver command, I see the same data, now in weewx >>> notation. >>> >>> I thought this might be a version issue, as I had 0.3.1 (or 0.3.2, i >>> forget which) version of the driver, and just updated to the current >>> version today with no change. >>> >>> For reference, these are the fields I see in my archive, when I export >>> it to csv: >>> >>> *DateTime, usUnits, interval, altimeter, appTemp*, appTemp1, *barometer*, >>> batteryStatus1, batteryStatus2, batteryStatus3, batteryStatus4, >>> batteryStatus5, batteryStatus6, batteryStatus7, batteryStatus8, >>> *cloudbase*, co, co2, consBatteryVoltage, *dewpoint*, dewpoint1, ET, >>> *extraHumid1, >>> extraHumid2, extraHumid3*, extraHumid4, extraHumid5, extraHumid6, >>> extraHumid7, extraHumid8, *extraTemp1, extraTemp2, extraTemp3*, >>> extraTemp4, extraTemp5, extraTemp6, extraTemp7, extraTemp8, forecast, hail, >>> hailBatteryStatus, hailRate, *heatindex*, heatindex1, heatingTemp, >>> heatingVoltage, *humidex*, humidex1, *inDewpoint, inHumidity, inTemp*, >>> inTempBatteryStatus, leafTemp1, leafTemp2, leafWet1, leafWet2, >>> *lightning_distance,* lightning_disturber_count, lightning_energy, >>> lightning_noise_count, *lightning_strike_count,* *luminosity, >>> maxSolarRad*, nh3, no2, noise, o3, *outHumidity, outTemp,* >>> outTempBatteryStatus, pb, pm10_0, pm1_0, pm2_5, *pressure, radiation, >>> rain,* rainBatteryStatus, *rainRate*, referenceVoltage, rxCheckPercent, >>> signal1, signal2, signal3, signal4, signal5, signal6, signal7, signal8 , >>> snow, snowBatteryStatus, snowDepth, snowMoisture, snowRate, so2, >>> *soilMoist1*, soilMoist2, soilMoist3, soilMoist4, soilTemp1, soilTemp2, >>> soilTemp3, soilTemp4, supplyVoltage, txBatteryStatus, *UV*, >>> uvBatteryStatus, windBatteryStatus, *windchill, windDir, windGust, >>> windGustDir, windrun, windSpeed* >>> >>> Underlined fields are those containing data, which line up with what I >>> would expect from my station. If I tell weewx Belchertown (my current skin) >>> to display lightning distance or lightning strike count, it will. I also >>> noticed I have no battery or signal strength fields here either. >>> >>> >>> I'm not sure if this is a driver issue or something up with weewx, or >>> some weirdness due to my freebsd system, but starting with the driver >>> seemed to be the right place. >>> >>> Thanks for any help! >>> >>> >>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/OjjpvqJ1850/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/0ce9d30e-232f-471a-b44d-1f9b51ad743fn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/0ce9d30e-232f-471a-b44d-1f9b51ad743fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/27afab10-7468-469e-8550-9e8eee437d64n%40googlegroups.com.
