Vince, I got the problem.

I needed to change the sensor map from Air to Tempest by replacing the 
obs_air to obs_st :-)
If I take a look into my database now I have following values:

- altimeter
- appTemp
- barometer
- cloudbase
- dewpoint
- humidex
- outHumidity
- outTemp
- outTempBatteryStatus
- pressure
- radiation
- rain
- rainRate
- UV 
- Wind (inl. Gust and Wind Run)


The only lightning is showing "NULL"


Il giorno lunedì 8 novembre 2021 alle 21:26:35 UTC+1 vince ha scritto:

> Hmmm - your obs_st shows wind,temperature, humidity, pressure but no UV or 
> radiation but the sensor status looks like the uv/light sensor is failed.   
> Definitely contact WF support.
>
> sensor_status  = 131076 = binary 100000000000000100 - the leading '1' 
> means light sensor failed according to sensor_status on 
> https://weatherflow.github.io/Tempest/api/udp/v171/ 
>
>
>
> On Monday, November 8, 2021 at 11:38:54 AM UTC-8 Mauro De Lauretis wrote:
>
>> Yes, I was thinking the same.
>>
>> These are the loop packets by running interactively:
>>
>> LOOP:   2021-11-08 20:15:12 CET (1636398912) dateTime: 1636398912, 
>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 245, windSpeed: 5.292
>>
>> LOOP:   2021-11-08 20:15:15 CET (1636398915) dateTime: 1636398915, 
>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.076
>>
>> LOOP:   2021-11-08 20:15:18 CET (1636398918) dateTime: 1636398918, 
>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 247, windSpeed: 5.04
>>
>> LOOP:   2021-11-08 20:15:21 CET (1636398921) dateTime: 1636398921, 
>> maxSolarRad: 0.0, rainRate: 0.0, usUnits: 16, windDir: 252, windSpeed: 4.068
>>
>>
>> By using your tool:
>>
>> hub_status     =>  ts  = 1636400075 firmware_revision  = 171 uptime  = 
>> 195702 rssi  = -52
>>
>> rapid_wind     =>  ts  = 1636400077 mps = 1.35 dir = 252
>>
>> rapid_wind     =>  ts  = 1636400080 mps = 1.34 dir = 251
>>
>> rapid_wind     =>rapid_wind     =>  ts  = 1636400083 mps = 1.47 dir = 251
>>
>> device_status  =>  serial_number  = ST-00048481 device_type = tempest ts  
>> = 1636400085 uptime  = 280025 voltage  = 2.561 firmware_revision  = 160 
>> rssi  = -52 hub_rssi  = -50 sensor_status  = 131076 debug  = 0
>>
>> obs_st        =>  timestamp  = 1636400084 wind_lull  = 1.16 wind_avg  = 
>> 1.41 wind_gust  = 1.68 wind_direction  = 248 wind_sample_interval  = 3 
>> station_pressure  = 1010.11 temperature  = 13.78 relative_humidity  = 95.59 
>> illuminance  = 0 uv  = 0.0 solar_radiation  = 0 rain_accumulated  = 
>> 0.031985 precipitation_type  = 1 lightning_strike_avg_distance  = 0 
>> lightning_strike_count  = 0 battery = 2.561 report_interval = 1 
>> firmware_revision = 160
>>
>> ---------
>>
>> raw data:  {"hub_sn": "HB-00034777", "ob": [1636400278, 1.88, 233], 
>> "serial_number": "ST-00048481", "type": "rapid_wind"}
>>
>>     raw data:  {"hub_sn": "HB-00034777", "ob": [1636400281, 2.2, 233], 
>> "serial_number": "ST-00048481", "type": "rapid_wind"}
>>
>>     raw data:  {"hub_sn": "HB-00034777", "ob": [1636400284, 1.93, 235], 
>> "serial_number": "ST-00048481", "type": "rapid_wind"}
>>
>>     raw data:  {"firmware_revision": "171", "fs": [1, 0, 15675411, 
>> 524288], "mqtt_stats": [119, 4], "radio_stats": [25, 1, 0, 3, 16961], 
>> "reset_flags": "BOR,PIN,POR", "rssi": -57, "seq": 19573, "serial_number": 
>> "HB-00034777", "timestamp": 1636400285, "type": "hub_status", "uptime": 
>> 195912}
>>
>>
>>
>>
>>
>>
>> Il giorno lunedì 8 novembre 2021 alle 19:49:48 UTC+1 vince ha scritto:
>>
>>> maxSolarRad is calculated by weewx, so it sounds like only your wind 
>>> sensor is working unless you typo'd something in weewx.conf.
>>>
>>> Voltage looks good. You might have temp+hum sensors that failed but 
>>> before contacting WF again you could check yourself pretty easily.
>>>
>>>    - run weewx interactively to see its loop packets (users guide link) 
>>>    <https://weewx.com/docs/usersguide.htm#Running_directly>
>>>    - or alternately stop weewx and run my UDP listener (github link) 
>>>    <https://github.com/vinceskahan/weatherflow-udp-listener> with the 
>>>    --raw option to see what the Hub is broadcasting without weewx in the 
>>> game 
>>>    at least temporarily.   You can run my listener with weewx running if 
>>> you 
>>>    have share_socket=true in weewx for the UDP driver.
>>>    
>>> Doing a little diagnosis before contacting WF support will probably help 
>>> them out either way.
>>>
>>> On Monday, November 8, 2021 at 9:38:19 AM UTC-8 Mauro De Lauretis wrote:
>>>
>>>>
>>>> Hi Vince
>>>>
>>>> Thank you for your answer.
>>>> The only values I get are the following:
>>>>
>>>> - maxSolarRad
>>>> - windDir
>>>> - windGust
>>>> - windGustDir
>>>> - windrun
>>>> - windSpeed
>>>>
>>>> I don't think my gear is in a degrading state because the WF was bought 
>>>> in December 2020 and the unit itself has been exchanged on warranty just 
>>>> once month ago.
>>>> The Battery Voltage is 2.56 volts at the moment.
>>>>
>>>> Greetings
>>>> Il giorno lunedì 8 novembre 2021 alle 18:15:18 UTC+1 vince ha scritto:
>>>>
>>>>> You're going to have to tell us 'which' items have null values, but 
>>>>> the WF gear does back off on which sensors it reports on (and how often) 
>>>>> as 
>>>>> the battery voltage gets low.  Perhaps your gear is in a degrading state. 
>>>>>   
>>>>> Check your WF app for the voltage and perhaps open a support call via 
>>>>> their 
>>>>> forums.
>>>>>
>>>>> On Monday, November 8, 2021 at 8:07:22 AM UTC-8 Mauro De Lauretis 
>>>>> wrote:
>>>>>
>>>>>> Hi All
>>>>>>
>>>>>> I was wondering If somebody could help me by finding out why I get 
>>>>>> NULL daa from some values from my WeatherFlow. Wind Data is the only I 
>>>>>> get 
>>>>>> without problems. This is my weewx.conf:
>>>>>>
>>>>>> [WeatherFlowUDP]
>>>>>>
>>>>>>     driver = user.weatherflowudp
>>>>>>
>>>>>>     log_raw_packets = False
>>>>>>
>>>>>>     udp_address = <broadcast>
>>>>>>
>>>>>>     # udp_address = 0.0.0.0
>>>>>>
>>>>>>     # udp_address = 255.255.255.255
>>>>>>
>>>>>>     udp_port = 50222
>>>>>>
>>>>>>     udp_timeout = 90
>>>>>>
>>>>>>     share_socket = True
>>>>>>
>>>>>>
>>>>>>     [[sensor_map]]
>>>>>>
>>>>>>         outTemp = air_temperature.ST-0048481.obs_air
>>>>>>
>>>>>>         outHumidity = relative_humidity.ST-00048481.obs_air
>>>>>>
>>>>>>         pressure =  station_pressure.ST-00048481.obs_air
>>>>>>
>>>>>>         lightning_strikes =  
>>>>>> lightning_strike_count.ST-00048481.obs_air
>>>>>>
>>>>>>         avg_distance =  
>>>>>> lightning_strike_avg_distance.ST-00048481.obs_air
>>>>>>
>>>>>>         outTempBatteryStatus =  battery.ST-00048481.obs_air
>>>>>>
>>>>>>         windSpeed = wind_speed.ST-00048481.rapid_wind
>>>>>>
>>>>>>         windDir = wind_direction.ST-00048481.rapid_wind
>>>>>>
>>>>>>         lux = illuminance.ST-00048481.obs_sky
>>>>>>
>>>>>>         UV = uv.ST-00048481.obs_sky
>>>>>>
>>>>>>         rain = rain_accumulated.ST-00048481.obs_sky
>>>>>>
>>>>>>         windBatteryStatus = battery.ST-00048481.obs_sky
>>>>>>
>>>>>>         radiation = solar_radiation.ST-00048481.obs_sky
>>>>>>
>>>>>>         lightningYYY = distance.ST-00048481.evt_strike
>>>>>>
>>>>>>         lightningZZZ = energy.ST-00048481.evt_strike
>>>>>>
>>>>>>
>>>>>>
>>>>>> Greetings
>>>>>>
>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fa15d299-cc70-4e38-ac6a-9298914dc1dcn%40googlegroups.com.

Reply via email to