Restart it via 'systemctl start weewx' and then do a 'systemctl status weewx'
and see what it thinks. IYou might also try "journalctl -xe" to see what
systemd thinks is going on.
Try running it interactively:
python3 /usr/share/weewx/weewxd /etc/weewx/weewx.conf
(hit control-C to exit that)
FWIW - I just installed weewx using that apt-get method on a bullseye pi
and it runs fine for me here.
[... editorial comment follows...]
You didn't mention 'which' system log, but on a pi you generally want to
look in /var/log/syslog and not /var/log/messages
Lots of things are possible including your .zip files having old extensions
that don't support python3. You didn't mention 'which' extensions and
versions of those.
On Thursday, November 11, 2021 at 8:50:33 AM UTC-8 [email protected] wrote:
> I've had WeeWx running happily along on a Raspberry Pi 3B for some time.
> Then I decided to upgrade that system to Bullseye. And, well, I apparently
> broke it.
>
> I first tried an in-place upgrade, rebooted, and it wasn't sending
> updates--the last line in the log file indicated that it would send updates
> to WeatherCloud, but then nothing was happening. So, figuring that the OS
> upgrade had gone south, I decided to reinstall from scratch.
>
> I downloaded weewx.conf from the Raspberry Pi, along with the .zip files
> for the extensions I'd installed. Then put a fresh image of RaspberryPiOS
> onto the card, copied over those saved files, installed WeeWx, used
> wee_extension to install the extensions, copied weewx.conf into
> /etc/weewx/, and restarted weewx. But sadly, no dice. Here's what I get
> in the system log when it tries to start:
>
> Nov 11 11:36:56 wxbox weewx[3405] INFO __main__: Initializing weewx
> version 4.5.1
> Nov 11 11:36:56 wxbox weewx[3405] INFO __main__: Using Python 3.9.2
> (default, Mar 12 2021, 04:06:34) #012[GCC 10.2.1 20210110]
> Nov 11 11:36:56 wxbox weewx[3405] INFO __main__: Platform
> Linux-5.10.63-v7+-armv7l-with-glibc2.31
> Nov 11 11:36:56 wxbox weewx[3405] INFO __main__: Locale is 'en_US.UTF-8'
> Nov 11 11:36:56 wxbox weewx[3405] INFO __main__: PID file is
> /var/run/weewx.pid
> Nov 11 11:36:57 wxbox weewx[3408] INFO __main__: Using configuration file
> /etc/weewx/weewx.conf
> Nov 11 11:36:57 wxbox weewx[3408] INFO __main__: Debug is 1
> Nov 11 11:36:57 wxbox weewx[3408] INFO weewx.engine: Loading station type
> Vantage (weewx.drivers.vantage)
> Nov 11 11:36:57 wxbox weewx[3408] INFO weewx.engine: StdConvert target
> unit is 0x1
>
> As you see, debug is enabled, but that's the last entry as of almost 15
> minutes ago. Where should I be looking to sort this out?
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/cbbe3e21-547b-4b68-ad49-16105264029cn%40googlegroups.com.
