Yes. Edit weewx.conf and set debug=1, restart WeeWX and wait for a failure. Once you have a failure take two log extracts and post them here. The first extract needs to show the full WeeWX restart and the first couple of report cycles. The second extract should cover the failure but needs to start a couple of report cycles before the failure.
Sometimes the clue is not what is in the log but what is not. Gary On Friday, 26 November 2021 at 06:57:32 UTC+10 Clyde wrote: > I'm running weewx 4.5.1 with a Belchertown skin on a Raspberry pi. All was > working fine, but recently the service randomly stops. There is nothing in > the /var/log/messages other than normal reports. Restarting the service > (`service weewx restart`) resumes normal operation until the next time. The > failures are happening maybe once a week, but not on any regular schedule. > > Any ideas on how to troubleshoot this? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/173e9e74-74ca-44a1-a344-7485efd9d7c0n%40googlegroups.com.
