PS from the other PI:
Version: 0.3.0 Date: 20 March 2021
And from the PI that now works:
Version: 0.4.1 Date: 14 October 2021
Revision History
14 October 2021 v0.4.1
- no change, version increment only
27 September 2021 v0.4.0
On Saturday, 27 November 2021 at 09:40:25 UTC Auchtermuchty Weather wrote:
> Hi Gary
>
> Thanks for looking at this so quickly.
>
> When I used WS View it wanted to update the firmware, so I did that last
> thing last night and Lo! When I tried the test again this morning it
> connected and got data!
>
> $ PYTHONPATH=/home/weewx/bin python -m user.gw1000 --test-driver
> Using configuration file /home/weewx/weewx.conf
>
> Interrogating None at 192.168.1.162:45000
>
> 2021-11-27 09:29:17 GMT (1638005357): UV: 0, dateTime: 1638005357,
> dayRain: 0.0, daymaxwind: 8.2, inHumidity: 49, inTemp: 18.2, luminosity:
> 3239.0, monthRain: 28.0, outHumidity: 67, outTemp: 2.0, pressure: 1004.9,
> rain: None, rainRate: 0.0, relbarometer: 1091.7, stormRain: 0.0, usUnits:
> 17, uvradiation: 2.8, weekRain: 5.9, wh25_batt: 0, wh25_sig: 4, wh65_batt:
> 0, wh65_sig: 4, windDir: 31, windGust: 1.5, windSpeed: 0.8, yearRain: 585.0
> ...
>
> Sorry I don't know what the previous firmware was but I brought and set
> this station up in late March this year, so it would have had whatever was
> current then and so is the GW1000 driver on the other Pi.
>
> So I can only conclude that the older driver is OK with both firmware
> versions, but the newer driver doesn't work with the older firmware.
>
> Current firmware is WH2650A_V1.6.8
>
> You got the correct IP,
>
>
> On Friday, 26 November 2021 at 23:13:09 UTC gjr80 wrote:
>
>> I've now been able to manually decode the response received and other
>> than the checksum and the device SSID it all decodes correctly or with
>> plausible values. Am I correct in understanding the device concerned is not
>> a GW1000 but actually a WH2650?
>>
>> Manually decoding the response I get the following results for the device:
>>
>> MAC: 48:3F:DA:54:59:59
>> IP address: 192.168.1.162
>> Port: 45000
>> SSID: ?WH2650A-WIFI5959 (note the ? is actually hexadecimal 10 which is
>> an ASCII control character and not printable on screen as such)
>>
>> It sounds odd that one RPi works fine whereas the other doesn't. The fact
>> that the response decodes means the network side of things is likely OK and
>> it suggests an issue within WeeWX/GW1000 driver. Could I get you to
>> try/confirm a couple of things for me:
>>
>> 1. use the WS View or WS View Plus app to confirm the device IP address,
>> MAC address, SSID and firmware version. These should be available from the
>> Device List screen on then WS View Plus app or the Device List and Live
>> Data screens on the WS View app.
>>
>> 2. the [GW1000] stanza from each RPi
>>
>> 3. confirm your device is actually on IP address 192.168.1.162
>>
>> 4. try the following commands on each RPi and post the response for each
>> from the log (note if the IP address is incorrect use the actual IP
>> address):
>>
>> $ PYTHONPATH=/home/weewx/bin python -m user.gw1000 --discover --debug=3
>> $ PYTHONPATH=/home/weewx/bin python -m user.gw1000
>> --ip-address=192.168.1.162 --mac-address --debug=3
>>
>>
>> Gary
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d19c45ce-5cba-40ec-862b-987257d0f099n%40googlegroups.com.
