Hello Rainer, that's a comprehensive answer. Thank you very much. I will install weeWX latest in my christmas holidays.
Regards Ralf P.S.: I thought I have already written this answer hours ago. But it doesn't appear in the google groups web UI. So ... if it appears more than once ... it is, like it is. [email protected] schrieb am Mittwoch, 1. Dezember 2021 um 10:32:07 UTC+1: > Forgot to add: > in WS View you have to choose "Ecowitt protocol" 😎 > On 01.12.2021 10:23, Rainer Lang wrote: > > Hi Ralf > the Ventus W830 is a clone of the Ecowitt WH2910C console/station and > weewx supports it via the interceptor driver. > Have a look at > https://www.wxforum.net/index.php?topic=40730.msg417956#msg417956 > and > > https://www.wetterstationsforum.info/wiki/doku.php?id=wiki:wetterstationen:ecowitt-stationen > resp. > https://www.pc-wetterstation.de/forum/viewtopic.php?f=26&t=10333 > > 1. You need to configure the custom server function of the console in WS > View, > > (make sure that in WS View custom server the server entry has NO http:// > or https:// - just the domain name or IP address, and that the path entry > is at least "/" - no entry there = no transmission by the console) > e.g. > > #------------ WS View custom server configuration ----------- > > server/IP: 192.168.1.77 > path: / > port: 8000 (must be the same as in weewx.conf [Interceptor] section) > interval: 16 > > > 2. install the weewx interceptor driver from GitHub ( > https://github.com/matthewwall/weewx-interceptor) and make sure, your > weewx.conf has the following entries: > > #-------- start of weewx.conf excerpt -------------------- > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge, smarthub, or access > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > # ecowitt-client - any hardware that uses the ecowitt protocol > # wu-client - any hardware that uses the weather underground protocol > device_type = ecowitt-client # don't choose "observer" for the modern > WiFi Ecowitt/Ambient stations > port = 8000 #same as chosen in WS View > iface = eth0 # or iface = wlan0 if you use a WLAN interface ("WiFi") > #----------------- end of weewx.conf excerpt ----------------------- > any more questions, send me a PM > cheers > Rainer > > On 01.12.2021 09:31, 'Ralf Jahns' via weewx-user wrote: > > > Hello, > > I looked through the documentation but couldn't find much about how to > connect the weather station to weewx. > > I own a weather station, that exactly looks like a FineOffset but has no > USB (it is a Ventus W830). > I'm sursprised, that it seems to be the usual way, to use a hardware > connection to the weather station. > > On my station, I can configure to send the data to e.g. weather > underground but also to a specific URL/IP. So I filled in the IP of a local > computer and looked with netcat (or so) and received a data record in clear > text with all the current weather data. I hoped it would be possible to use > this kind of interface with weewx. (The netcat test only works once after > connection is established, probably the weather stations requires some kind > of protocol.) > > So, is it possible to connect my weather station to weewx by network > socket interface? > > Regards > Ralf > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/267b418e-760f-4452-a1cb-4b96092d270en%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/267b418e-760f-4452-a1cb-4b96092d270en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/64bd4355-2c89-48c7-8590-e4ffd372c566n%40googlegroups.com.
