Gary's gw1000 driver tends to catch up to new sensors very quickly and is much easier to set up than interceptor. Give that a try.
FWIW - I have the following: - gw1000 for inside T+H - WH32 for outside T+H - four extra inside WH31 T+H sensors - one WH51 soil sensor On Wednesday, December 22, 2021 at 2:39:36 PM UTC-8 [email protected] wrote: > I am running Weewx 4.5.1 using Matthew's Interceptor driver in > ecowitt-client mode to parse data from an Ecowitt GW1000. I recently > supplemented my Ecowitt setup with a few additional sensors and cannot seem > to get them to parse properly. > > A few rounds of the syslog: > Dec 22 16:20:54 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily summary > version is 1.0 > Dec 22 16:20:55 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily summary > version is 1.0 > Dec 22 16:20:56 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily summary > version is 4.0 > Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.imagegenerator: > Generated 16 images for report StandardReport in 7.17 seconds > Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.reportengine: Copied 9 > files to /var/www/html/weewx > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.reportengine: Running > report 'cmon' > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.reportengine: Found > configuration file /etc/weewx/skins/cmon/skin.conf for report 'cmon' > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.cheetahgenerator: Using > search list ['weewx.cheetahgenerator.Almanac', > 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', > 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', > 'weewx.cheetahgenerator.Extras', 'weewx.cheetahgenerator.JSONHelpers'] > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily summary > version is 4.0 > Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.cheetahgenerator: > Generated 1 files for report cmon in 0.20 seconds > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily summary > version is 4.0 > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG PIL.PngImagePlugin: STREAM > 'IHDR' 16 13 > Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG PIL.PngImagePlugin: STREAM > 'IDAT' 41 1216 > Dec 22 16:21:04 Gugelhupf weewx[20166] DEBUG user.interceptor: empty queue > Dec 22 16:21:10 Gugelhupf weewx[20166] DEBUG user.interceptor: POST: > PASSKEY=XXXX&stationtype=GW1000B_V1.6.8&dateutc=2021-12-22+22:21:10&tempinf=71.6&humidityin=53&baromrelin=29.406&baromabsin=29.406&tempf=74.1&humidity=50&winddir=149&windspeedmph=1.57&windgustmph=4.47&maxdailygust=5.82&solarradiation=21.16&uv=0&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.110&monthlyrainin=1.091&yearlyrainin=50.925&totalrainin=50.925&temp2f=71.60&humidity2=55&lightning_time=1639936192&lightning_num=0&lightning=14&tf_ch1=58.8&wh65batt=0&batt2=0&wh57batt=4&tf_batt1=1.40&freq=915M&model=GW1000_Pro > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: raw data: > PASSKEY=3190878978C9C58F9A8EE5E46324353B&stationtype=GW1000B_V1.6.8&dateutc=2021-12-22+22:21:10&tempinf=71.6&humidityin=53&baromrelin=29.406&baromabsin=29.406&tempf=74.1&humidity=50&winddir=149&windspeedmph=1.57&windgustmph=4.47&maxdailygust=5.82&solarradiation=21.16&uv=0&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.110&monthlyrainin=1.091&yearlyrainin=50.925&totalrainin=50.925&temp2f=71.60&humidity2=55&lightning_time=1639936192&lightning_num=0&lightning=14&tf_ch1=58.8&wh65batt=0&batt2=0&wh57batt=4&tf_batt1=1.40&freq=915M&model=GW1000_Pro > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter eventrainin=0.000 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter baromrelin=29.406 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter maxdailygust=5.82 > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter lightning_time=1639936192 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter monthlyrainin=1.091 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter PASSKEY=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter tf_ch1=58.8 > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter lightning_num=0 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter hourlyrainin=0.000 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter freq=915M > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter tf_batt1=1.40 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter model=GW1000_Pro > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter yearlyrainin=50.925 > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter wh57batt=4 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter dailyrainin=0.000 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter stationtype=GW1000B_V1.6.8 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored > parameter weeklyrainin=0.110 > Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor: unrecognized > parameter lightning=14 > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: raw packet: > {'wind_speed': 1.57, 'humidity_in': 53.0, 'temperature_in': 71.6, > 'solar_radiation': 21.16, 'wind_gust': 4.47, 'humidity_2': 55.0, > 'temperature_2': 71.6, 'wh65_battery': 0.0, 'humidity_out': 50.0, 'uv': > 0.0, 'battery_2': 0.0, 'rain': 0.0, 'dateTime': 1640211670, 'pressure': > 29.406, 'temperature_out': 74.1, 'wind_dir': 149.0, 'rain_total': 50.925, > 'rain_rate': 0.0, 'usUnits': 1} > Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: mapped > packet: {'pressure': 29.406, 'outHumidity': 50.0, 'rainRate': 0.0, 'UV': > 0.0, 'radiation': 21.16, 'rain': 0.0, 'dateTime': 1640211670, 'windDir': > 149.0, 'outTemp': 74.1, 'windSpeed': 1.57, 'extraHumid2': 55.0, 'inTemp': > 71.6, 'windGust': 4.47, 'inHumidity': 53.0, 'extraTemp2': 71.6, 'usUnits': > 1} > > I know there are some adjustments I need to make to properly log the > lighting sensor (WH57) though I'm not sure which pull request to go with > https://github.com/matthewwall/weewx-interceptor/pull/72 or > https://github.com/matthewwall/weewx-interceptor/pull/99. Pull #72 looks > more straight forward for a direct edit and I think following that format I > could also add support for the WN34L since it's newer and shows up as > tf_ch1. Has anyone worked with the newer WN34 sensor? > > Where I am really lost is why the WH31 is not working correctly. There is > not a parameter issue shown, and temp2f seems to be in the existing map in > the interceptor driver. I have checked my MySQL database and there is no > data in the extraTemp2 or extraHumid2 fields. Is there another step I > missed? > > Associated section of weewx.conf: > [[[[Generic]]]] > barometer = Barometer > dewpoint = Dew Point > ET = ET > heatindex = Heat Index > inHumidity = Inside Humidity > inTemp = Inside Temperature > outHumidity = Humidity > outTemp = Outside Temperature > radiation = Radiation > rain = Rain > rainRate = Rain Rate > UV = UV Index > windDir = Wind Direction > windGust = Gust Speed > windGustDir = Gust Direction > windSpeed = Wind Speed > windchill = Wind Chill > windgustvec = Gust Vector > windvec = Wind Vector > extraTemp1 = Pi CPU > extraTemp2 = Shop Temperature > extraTemp3 = Temperature3 > > Thanks in advance, > Jonathan > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7a4095d4-70f5-4de1-955b-c2b70e22f721n%40googlegroups.com.
