Hi,
As far as WeeWX is concerned setting the port config option should be all
that's needed. Something like (untested):
[StdReport]
....
[[RSYNC]]
....
port = 27
If that is not working I suggest you edit weewx.conf and set debug = 1.
Save and restart WeeWX. Have a look at the log, the rsync command line
being used by WeeWX should appear in the log.
If the log shows that port 27 is being used by WeeWX then I would be
looking elsewhere. Can you rsync with port 27 from the command line? From
another machine? Are there any firewalls blocking port 27?
Gary
On Sunday, 2 January 2022 at 09:43:48 UTC+10 [email protected] wrote:
> Hello all,
>
> I just switched web hosts and they use port 27 for their SSH/RSYNC
> connections. I dutifully entered port = 27 into my RSYNC section
> (previously there was no port line specified) put the log is reporting that
> it is trying on port 22.
>
> Thoughts?
>
> Cheers, and Happy New Year,
> Chris
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/98465ae1-70c8-4cb2-b982-d6f902f43b8en%40googlegroups.com.
