You have two instances of WeeWX running; one running the vantage driver and one running (I presume) the gw1000 driver. Does the vantage instance use the Seasons skin to produce a set of web pages displaying vantage data only? Likewise for the gw1000 instance, does it use the Seasons skin to produce a set of web pages displaying gw1000 data only? Or are you trying to have one instance (let’s say the vantage instance) use the Seasons skin to produce a set of web pages displaying both vantage and gw1000 data? Or are you doing something else altogether? Just trying to find out how you are using Seasons, in particular what data is being used. That will affect the available solutions to your issue.
Gary On Wednesday, 5 January 2022 at 01:28:22 UTC+10 [email protected] wrote: > I am not sure what do you mean with a single Season suite. > Weewx was running with a Davis station. I only copied these weewx.conf > twice -> davis.conf and ecowitt.conf > and have kept the only one Season skin. ( = single Season suite ?) > > Joachim > > > gjr80 schrieb am Dienstag, 4. Januar 2022 um 12:46:58 UTC+1: > >> There are a couple of ways you can handle this but the solution really >> depends on what you are trying to do. Do you have two separate Seasons >> suites (one for vantage and one for gw1000) or do you have a single Seasons >> suite display data from both stations? >> >> Gary >> >> On Tuesday, 4 January 2022 at 19:22:56 UTC+10 [email protected] wrote: >> >>> The 2 instances ( Davis, Ecowitt ) run without problems with the season >>> skin. Davis shows the soil moisture in "*cb*" and Ecowitt in "*%*". >>> Unfortunately, I can only enter cb or % in the skin. Is there a solution so >>> that the correct unit is displayed depending on the station? >>> >>> Joachim >>> >>> Rich Bonavida schrieb am Donnerstag, 28. Mai 2020 um 15:51:48 UTC+2: >>> >>>> Thanks Gary, two instances it is. >>>> >>>> Rich >>>> >>>> >>>> On Thursday, May 28, 2020 at 12:59:46 AM UTC-7, gjr80 wrote: >>>>> >>>>> Hi, >>>>> >>>>> Short answer is you will need to run two instances of WeeWX, either on >>>>> a single device or separate devices. I am in much the same boat having >>>>> run >>>>> the vantage driver for many years and recently bought a GW1000 and a >>>>> number >>>>> of temp/hum sensors and soil moisture sensors. A given WeeWX instance can >>>>> only run one driver so hence the need for separate WeeWX instances. You >>>>> can >>>>> have a WeeWX service that can obtain observational data and add it to >>>>> loop >>>>> packets/archive records emitted by the driver, some drivers can run as a >>>>> driver or a service but the vantage and interceptor drivers cannot. >>>>> >>>>> To run separate WeeWX instances you will need separate config files >>>>> and databases for each. Reporting is up to you but if you intend >>>>> combining >>>>> data from both devices it may be easiest to have one instance handle the >>>>> reporting, though if you intend having separate reports then each >>>>> instance >>>>> will require its own reporting. The wiki has a fairly good article on >>>>> setting it up (https://github.com/weewx/weewx/wiki/weewx-multi). >>>>> >>>>> I have found the biggest challenge was remembering I have two WeeWX >>>>> instances running and the need to use specific service names when >>>>> controlling the individual services/instances (after being used to just >>>>> using systemctl xxxxxx weewx that now affects both services). Getting >>>>> your >>>>> logs sorted is also important, log entries for each instance will be >>>>> identified separately but I found it easier to send each to separate log >>>>> files, This is covered at the bottom of the Put log messages from WeeWX >>>>> in >>>>> a separate file article in the wiki ( >>>>> https://github.com/weewx/weewx/wiki/logging). >>>>> >>>>> Both running fine now under WeeWX 4.1.0/python 3. >>>>> >>>>> Gary >>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3f2f4a4a-5af1-4507-88c9-76f18073bd42n%40googlegroups.com.
