I am running an ACURite 1035 local wx stn. and comms between sensor on
mast and indoor display unit is in 430 MHz band area.
I recently bought a Taylor remote indoor/outdoor temp monitor unit with
outdoor temp sensor and indoor display unit; testing the remote sensor
showed it did not work. Need to determine if sensor is faulty or is
being interfered with by another neighbour's sensor or other source of
RFI/EMI . Disabling the outdoor sensor the display unit appears to have
locked onto either another Taylor sensor in a neighbour's yard or else
the format is compatible with my ACURite station because the Taylor
display unit is displaying and tracking the actual outdoor temp
correctly without my remote sensor being activated.
My purpose for needing the remote sensor was to place it in a partially
heated container outside and monitor temp so couriers can leave
temperature sensitive medical sensors inside the box to avoid freezing
and damaging the medical sensors.
Anyone have any tech spectrum info on the Taylor units? Contacting
Taylor got me handed off to another instrument mfr and then to another
USA mfr who has not replied at all.
Thanks for whatever info you may offer.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/1635e0fd-1baf-25db-ffb0-51f94b218406%40gmail.com.
