I am using weewx for a time now and have a issue with some times missing data. I am using Oregon and TFA sensors with RTL_433. I run meteotemplate and also use the data send to CWOP to be broadcast-ed through the APRS network. (HAM operator)
When I set my archive interval to 300 sec all works ok and only very rarely I miss data. But when I set my archive_interval to 60 sec I often have a empty field. This shows on the APRS network because the transmitted data shows -.- Even if I set my CWOP post_interval too 300 in still does this when the archive_interval is set to 60. Is there a option to tell weewx to use the previous recorded value if no new value is available? (May be only to the data set send to CWOP in my case) Ideally this would be limited to a maximum to prevent sending data when sensors fail. (something like use previous n times and then send N/A) Grtx Michiel -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c4da71f2-dea4-4205-9483-246148ad807bn%40googlegroups.com.
