Aha, I see that now in the 'info' output.
After repeated applications of the proper wee_device command,
wee_device --set-transmitter-type=*N*,10
I now have:
TRANSMITTERS:
Channel Receive Repeater Type
1 active none iss
2 inactive none (N/A)
3 inactive none (N/A)
4 inactive none (N/A)
5 inactive none (N/A)
6 inactive none (N/A)
7 inactive none (N/A)
8 inactive none (N/A)
Thanks!
On Tuesday, February 15, 2022 at 11:35:22 AM UTC-8 [email protected] wrote:
> For some reason, every channel in your console is active. You can try
> shutting them all off except the ISS. Either do it through the console (
> see your owners manual), or wee_device can do this.
>
> Generally the ISS is on channel 1.
>
> On Mon, Feb 14, 2022 at 5:37 PM Rob Cranfill <[email protected]> wrote:
>
>> Well that 'splains it! :-) I'll set about removing those (and cleaning up
>> the DB, right? As detailed elsewhere in this thread?)
>>
>> As requested,
>>
>> pi@pi3b:/etc/weewx $ wee_device --info
>> Using configuration file /etc/weewx/weewx.conf
>> Using Vantage driver version 3.2.3 (weewx.drivers.vantage)
>> Unable to wake up console... sleeping
>> Unable to wake up console... retrying
>> Querying...
>> Davis Vantage EEPROM settings:
>>
>> CONSOLE TYPE: Vantage Vue
>>
>> CONSOLE FIRMWARE:
>> Date: Feb 3 2015
>> Version: 4.18
>>
>> CONSOLE SETTINGS:
>> Archive interval: 60 (seconds)
>> Altitude: 150 (foot)
>> Wind cup type: large
>> Rain bucket type: 0.01 inches
>> Rain year start: 1
>> Onboard time: 2022-02-14 17:34:27
>>
>> CONSOLE DISPLAY UNITS:
>> Barometer: mbar
>> Temperature: degree_F
>> Rain: inch
>> Wind: mile_per_hour
>>
>> CONSOLE STATION INFO:
>> Latitude (onboard): +47.6
>> Longitude (onboard): -122.3
>> Use manual or auto DST? AUTO
>> DST setting: N/A
>> Use GMT offset or zone code? ZONE_CODE
>> Time zone code: 4
>> GMT offset: N/A
>> Temperature logging: LAST
>> Retransmit channel: OFF (0)
>>
>> TRANSMITTERS:
>> Channel Receive Repeater Type
>> 1 active none iss
>> 2 active none (N/A)
>> 3 active none (N/A)
>> 4 active none (N/A)
>> 5 active none (N/A)
>> 6 active none (N/A)
>> 7 active none (N/A)
>> 8 active none (N/A)
>>
>> RECEPTION STATS:
>> Total packets received: 24546
>> Total packets missed: 143
>> Number of resynchronizations: 0
>> Longest good stretch: 677
>> Number of CRC errors: 16
>>
>> BAROMETER CALIBRATION DATA:
>> Current barometer reading: 29.980 inHg
>> Altitude: 150 feet
>> Dew point: 42 F
>> Virtual temperature: 48 F
>> Humidity correction factor: 1.8
>> Correction ratio: 1.006
>> Correction constant: +0.000 inHg
>> Gain: 0.000
>> Offset: -33.000
>>
>> OFFSETS:
>> Wind direction: +0 deg
>> Inside Temperature: +0.0 F
>> Inside Humidity: +0 %
>> Outside Temperature: +0.0 F
>> Outside Humidity: +0 %
>>
>> On Monday, February 14, 2022 at 3:28:09 PM UTC-8 [email protected] wrote:
>>
>>> Rob,
>>>
>>> Before this version, weewx only reported on explicit tags. For example,
>>> if you didn't put $current.soilTemp1 in the template, you were not going to
>>> see it in the report.
>>>
>>> Now it basically reports on everything that's in the database.
>>>
>>> To stop it, look in the skin.conf file for the Seasons skin. Near the
>>> top, you will see a stanza labelled [DisplayOptions]. In this stanza are
>>> lists of the various types. Just remove any type for which you do not want
>>> to be included in the report.
>>>
>>> As for where these values are coming from, I have no idea. Either they
>>> are being emitted by your Vantage Vue, or they are being introduced by one
>>> of your extensions. It's also possible you are picking up sensors from a
>>> neighbor.
>>>
>>> In fact, now that I think about it, it would be worth seeing which
>>> sensors your Vantage is aware of. Try running
>>>
>>> *wee_device --info*
>>>
>>>
>>> -tk
>>>
>>> On Mon, Feb 14, 2022 at 3:15 PM Rob Cranfill <[email protected]> wrote:
>>>
>>>> First, I guess I'm just confused as to why I'm getting all this good
>>>> stuff when my previous (<4.6) installation was happy for so long.....
>>>>
>>>> I just did a quick 'grep' looking around, and I do see that the
>>>> standard Seasons skin *defines* a bunch of these unwanted values. Is that
>>>> enough to cause them to be reported?
>>>>
>>>> On Monday, February 14, 2022 at 11:27:03 AM UTC-8 vince wrote:
>>>>
>>>>> You have to have something mapped to a lot of leaf and soil sensors.
>>>>> We'd need to see all your skin.conf files and your weewx.conf file to
>>>>> know
>>>>> for sure where they're coming from. If you can't find it, I'd suggest you
>>>>> use StdQC to just filter out the extraneous things (link to User's
>>>>> Guide) <https://weewx.com/docs/usersguide.htm#%5B%5BMinMax%5D%5D>.
>>>>>
>>>>> All your bogus temperatures seem to read crazy low numbers. Set the
>>>>> min/max to a range you'll never see and weewx should ignore them even if
>>>>> you can't find a way to turn them off. Perhaps something like the
>>>>> following (untested):
>>>>>
>>>>> [StdQC]
>>>>> [[MinMax]]
>>>>> leafTemp1 = 200, 201, deg_F
>>>>> leafTemp2 = 200, 201, deg_F
>>>>> soilTemp1 = 200, 201, deg_F
>>>>> soilTemp2 = 200, 201, deg_F
>>>>> soilTemp2 = 200, 201, deg_F
>>>>> soilTemp2 = 200, 201, deg_F
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>
>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>>
>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/46b0c5ae-a3ed-40df-947c-cb4a0a46471fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/bf776ba0-06d8-4bf5-a756-ad2b261d507fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> -tk
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d9e5e945-08e5-4f70-98e7-2314ea43e767n%40googlegroups.com.
