The METRIC unit system describes default units for all observation types known to WeeWX. You need to list only, where you want to use another unit than the default unit for that unit system.
If you include obs_to_upload = inputs in the MQTT configuration, then the observation types listed in the [inputs] section are sent only. Geni schrieb am Samstag, 9. April 2022 um 14:16:39 UTC+2: > Thanks works. > Why do not all values have to be listed here? > Where is defined which values are in the MQTT stream? > Geni > [email protected] schrieb am Samstag, 9. April 2022 um 12:25:22 UTC+2: > >> Additionally that link for german speaking users: >> https://www.woellsdorf-wetter.de/software/mosquitto.html >> >> Karen K schrieb am Samstag, 9. April 2022 um 12:15:49 UTC+2: >> >>> [[MQTT]] >>> unit_system = METRIC >>> ... >>> [[[inputs]]] >>> [[[[rainRate]]]] >>> units = mm_per_hour >>> [[[[rain]]]] >>> units = mm >>> [[[[hourRain]]]] >>> units = mm >>> [[[[rain24]]]] >>> units = mm >>> [[[[dayRain]]]] >>> units = mm >>> [[[[ET]]]] >>> units = mm >>> [[[[dayET]]]] >>> units = mm >>> [[[[ET24]]]] >>> units = mm >>> >>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/83fff235-b768-47df-adf8-aa68bdab9028n%40googlegroups.com.
