Or should I use another value instead of soilMoist for an extra wind 
sensor? Has this anyone working with correct daily-monthly max gust plots 
in a sdr setup for the additional wind sensor?

[email protected] schrieb am Mittwoch, 9. März 2022 um 06:17:45 UTC+1:

> It seems like if there are more wind gusts per archive interval (tried it 
> out with the wh65 which creates 3 to 4), it aggregates only for the 
> statistics and yearly plots, but not the daily, weekly or monthly, setting 
> aggregate type to max doesnt have an impact. Can this be fixed or should i 
> try with other pre defined sensor names, maybe soilTemp?
>
> [email protected] schrieb am Dienstag, 8. März 2022 um 10:49:56 UTC+1:
>
>> [[[dayextrawind]]]
>>        [[[[soilMoist1]]]]
>>        [[[[soilMoist2]]]]
>>
>> [[[weekextrawind]]]
>>        [[[[soilMoist1]]]]
>>        [[[[soilMoist2]]]]
>>         aggregate_type = max
>>
>> [[[monthextrawind]]]
>>     [[[[soilMoist1]]]]
>>     [[[[soilMoist2]]]]
>>         aggregate_type = max
>>
>> [[[yearextrawind]]]
>>     [[[[soilMoist1]]]]
>>     [[[[soilMoist2]]]]
>>         aggregate_type = max
>>
>> Should I add aggregate_type = max to daily too?
>> [email protected] schrieb am Montag, 7. März 2022 um 16:07:25 UTC+1:
>>
>>> What did you use in skin.conf for those plots?
>>>
>>> On Sun, Mar 6, 2022 at 11:59 PM [email protected] <[email protected]> 
>>> wrote:
>>>
>>>> Yesterday I had a maximum gust of 39.2 km/h on one of my stations, and 
>>>> while normally, maximum gusts are plotted just fine, this certain gust 
>>>> doesn't appear in the daily, weekly, montly or yearly plot, which is quite 
>>>> strange. I may have to add, it runs under an extra sensor (soilmoist) in 
>>>> an 
>>>> sdr setup, maybe the gusts aren't getting as priorized in the graph then, 
>>>> if the pixel count of the plot doesn't allow and it gone under in the 
>>>> pixel 
>>>> density, but normally this doesn't occur so what could be the reason?
>>>>
>>>> The gust on another weewx system from the station data over usb for 
>>>> reference:
>>>> [image: 2022-03-07_083107.jpg]
>>>> The plot on my new weewx system I'm talking about:
>>>> [image: 2022-03-07_083334.jpg]
>>>> The weekly plot, take notice that it is reported in the statistics, 
>>>> yesterday it was in the daily statistic too:
>>>> [image: 2022-03-07_075008.jpg]
>>>> But why isn't it on the plot? For every other day the plots do match 
>>>> the daily max gust in the statistics, so there is no peak averaging active 
>>>> in the plots. 
>>>>
>>>>
>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/weewx-user/781186aa-e5d7-4b5e-9403-c2a7cb3db890n%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/781186aa-e5d7-4b5e-9403-c2a7cb3db890n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/02087a79-e254-4634-8791-ffdfe49acc87n%40googlegroups.com.

Reply via email to