"Using the interval field from the current archive record should always give the correct value.".
I use it in my extension and it works very well: *event.record['interval'] * Le vendredi 10 juin 2022 à 05:04:45 UTC+2, gjr80 a écrit : > Whilst in almost all cases the archive interval used by WeeWX will match > the archive_interval config option in weewx.conf [StdArchive] this is not > always the case. Installs that use software record generation always use an > archive interval that matches the archive_interval config option; > however, when using hardware record generation if the archive interval set > in the station hardware is different to the archive_interval config > option the archive_interval config option is ignored and the station > hardware archive interval is used instead. This is most commonly seen with > Davis stations used with a default WeeWX install. The Davis station uses an > out-of-the-box 30 minute archive interval and that value overrides the > default WeeWX archive interval of five minutes. > > Using the interval field from the current archive record should always > give the correct value. > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5000bcff-7e75-4229-a2e8-d2f4f524f529n%40googlegroups.com.
