I know, the interceptor driver is semi-abandoned, since for ecowitt devices
it has been replaced by the gw80, so is not so easy to get support. Anyway
I'm using the interceptor driver and I managed to make some modifications
to get data from other sensors, so I can try to help you. What device type
did you set, Observer? It seems that there are various unrecognized
parameters from the captured packets. At first we should check what the
driver is getting from the weather station, you can try to run the driver
directly (following is for the observer, : sudo PYTHONPATH=/usr/share/weewx
python3 /usr/share/weewx/user/interceptor.py --device=observer
--port=theportyouset --debug (you have to stop weewx before running this)).
You will get the raw packets and the mapped ones, so you can see precisely
what is not mapped and you can decide what to ignore and what to keep. Then
you have to check on the Observer Class (about line 1299). There a section
with LABEL_MAP, which contains key/value pairs, it should look like this
(this have probabily a few more items then the default one, since I was
using obsever too at first (then I switched to ecowitt-client)):
LABEL_MAP = {
# firmware Weather logger V2.1.9
'humidity': 'humidity_out',
'indoorhumidity': 'humidity_in',
'tempf': 'temperature_out',
'indoortempf': 'temperature_in',
'baromin': 'barometer',
'windspeedmph': 'wind_speed',
'windgustmph': 'wind_gust',
'solarradiation': 'solar_radiation',
'dewptf': 'dewpoint',
'windchillf': 'windchill',
# firmware HP1001 2.2.2
'outhumi': 'humidity_out',
'inhumi': 'humidity_in',
'outtemp': 'temperature_out',
'intemp': 'temperature_in',
'absbaro': 'pressure',
'windspeed': 'wind_speed',
'windgust': 'wind_gust',
'light': 'luminosity',
'dewpoint': 'dewpoint',
'windchill': 'windchill',
'rainrate': 'rain_rate',
# firmware AMBWeatherV4.0.2
'baromabsin': 'pressure',
'tempinf': 'temperature_in',
'humidityin': 'humidity_in',
'uv': 'uv',
# firmware WS-1002 V2.4.3 also reports station pressure
'absbaromin': 'pressure',
# firmware EasyWeatherV1.3.9 (ecowitt HP2550)
'AqPM2.5': 'pm2_5',
'soilmoisture': 'soilmoisture',
# firmware GW1000B_V1.4.9 (ecowitt GW1000)
'rainratein': 'rain_rate',
'wh65batt': 'battery',
'eventrainin': 'rain_event',
# for all firmware
'winddir': 'wind_dir',
'windgustdir': 'wind_gust_dir',
'UV': 'uv',
'lowbatt': 'battery',
}
At the beginning of the interceptor (about line 368) there is the default
sensor map declared:
DEFAULT_SENSOR_MAP = {
'pressure': 'pressure',
'barometer': 'barometer',
'outHumidity': 'humidity_out',
'inHumidity': 'humidity_in',
'outTemp': 'temperature_out',
'inTemp': 'temperature_in',
'windSpeed': 'wind_speed',
'windGust': 'wind_gust',
'windDir': 'wind_dir',
'windGustDir': 'wind_gust_dir',
'radiation': 'solar_radiation',
'dewpoint': 'dewpoint',
'windchill': 'windchill',
'rain': 'rain',
'rainRate': 'rain_rate',
'UV': 'uv',
'txBatteryStatus': 'battery',
'extraTemp1': 'temperature_1',
'extraTemp2': 'temperature_2',
'extraTemp3': 'temperature_3',
'extraHumid1': 'humidity_1',
'extraHumid2': 'humidity_2',
'soilTemp1': 'soil_temperature_1',
'soilTemp2': 'soil_temperature_2',
'soilMoist1': 'soil_moisture_1',
'soilMoist2': 'soil_moisture_2',
'soilMoist3': 'soil_moisture_3',
'soilMoist4': 'soil_moisture_4',
'leafWet1': 'leafwetness_1',
'leafWet2': 'leafwetness_2',
# these are not in the wview schema
'pm2_5': 'pm2_5',
'extraTemp4': 'temperature_4',
'extraTemp5': 'temperature_5',
'extraTemp6': 'temperature_6',
'extraTemp7': 'temperature_7',
'extraTemp8': 'temperature_8',
'extraHumid3': 'humidity_3',
'extraHumid4': 'humidity_4',
'extraHumid5': 'humidity_5',
'extraHumid6': 'humidity_6',
'extraHumid7': 'humidity_7',
'extraHumid8': 'humidity_8',
'soilTemp3': 'soil_temperature_3',
'soilTemp4': 'soil_temperature_4',
'lightning_strike_count': 'lightning_strike_count',
'lightningcount': 'lightningcount',
'lightning_last_det_time': 'lightning_time',
'lightning_distance': 'lightning_distance',
}
so you basically have to edit your LABEL_MAP to match the default sensor
map. For example since you have an extra temperature sensor, showing as temp1f
and a extra humidity sensor showing as , you could try to add this pairs to
your label map:
'temp1f': 'temperature_1',
'humidity1': 'humidity_1'
and so on for all the other extra sensors you want to save on DB (the
default vwiew schema should be enough to contain all your extra values, if
not you might have to add some columns to the schema).
There are some values that you might want to ignore (for example station
type and so on...), for this there is a section right down below LABEL_MAP
that is IGNORED_LABELS (here's mine):
IGNORED_LABELS = [
'PASSKEY', 'dateutc', 'stationtype', 'model', 'freq']
Il giorno venerdì 1 luglio 2022 alle 04:17:49 UTC+2 [email protected] ha
scritto:
> This has not ben updated in years and I am wonering if these errors can be
> fixed so I can start capturing this data in the DB instead of throwing it
> away?
>
> My station is an AmbientWeather WS-2902C. The driver works fine and
> everything is as expected except those extra fields are never processed by
> the weewx driver. Note there are three measurements that look as though
> they are repeated but they are actually from an additional sensor given to
> me by ambient. I believe the unit can handle up to 10 extra sensors so the
> WS-2092 just tags those on the end somethins like:
>
> temp1f, temp2f, temp3f
> hummiditry1, humidity2, humitidty3
> batt1, batt2, batt3
>
> and so on.
>
> I used to be a programmer, if I just knew where to look within the
> interceptor driver I could just add all the values for any extra sensors
> that might be purchased by any PWS owner to be sure they were all handled
> no matter how many extra sensors were purchased and included (batt1 -
> batt20 and the like).
>
> I have asked many times within Github etc. but support for the interceptor
> driver seems to be completely dead. Iam getting 11 error messages ovewr and
> over and over - I have made every other set italic below so you can see
> whta I mean.
>
> Anyone have any ideas or would know how to help? Alot of people rely upon
> this driver!????
>
> pi@kruse-pi:~ $ sudo tail -f /var/log/weewx.log
>
>
>
>
>
>
>
>
>
>
>
> *Jun 30 22:04:13 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3Jun 30 22:04:13 kruse-pi weewx[20342]
> INFO user.interceptor: unrecognized parameter baromrelin=29.944Jun 30
> 22:04:13 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1Jun 30 22:04:13 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter maxdailygust=2.2Jun 30 22:04:13
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> hourlyrainin=0.000Jun 30 22:04:13 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter eventrainin=0.000Jun 30 22:04:13
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> totalrainin=0.000Jun 30 22:04:13 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter temp1f=79.9Jun 30 22:04:13
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> humidity1=65Jun 30 22:04:13 kruse-pi weewx[20342] INFO user.interceptor:
> unrecognized parameter batt1=1Jun 30 22:04:13 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter batt_co2=1*Jun 30 22:04:33
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> stationtype=AMBWeatherV4.3.3
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.941
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.9
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:04:33 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
>
>
>
>
>
>
>
>
>
>
>
> *Jun 30 22:04:59 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3Jun 30 22:04:59 kruse-pi weewx[20342]
> INFO user.interceptor: unrecognized parameter baromrelin=29.941Jun 30
> 22:04:59 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1Jun 30 22:04:59 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter maxdailygust=2.2Jun 30 22:04:59
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> hourlyrainin=0.000Jun 30 22:04:59 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter eventrainin=0.000Jun 30 22:04:59
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> totalrainin=0.000Jun 30 22:04:59 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter temp1f=79.9Jun 30 22:04:59
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> humidity1=65Jun 30 22:04:59 kruse-pi weewx[20342] INFO user.interceptor:
> unrecognized parameter batt1=1Jun 30 22:04:59 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter batt_co2=1*Jun 30 22:05:16
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> stationtype=AMBWeatherV4.3.3
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.941
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.9
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:05:16 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
>
>
>
>
>
>
>
>
>
>
>
> *Jun 30 22:05:31 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3Jun 30 22:05:31 kruse-pi weewx[20342]
> INFO user.interceptor: unrecognized parameter baromrelin=29.941Jun 30
> 22:05:31 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1Jun 30 22:05:31 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter maxdailygust=2.2Jun 30 22:05:31
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> hourlyrainin=0.000Jun 30 22:05:31 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter eventrainin=0.000Jun 30 22:05:31
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> totalrainin=0.000Jun 30 22:05:31 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter temp1f=79.9Jun 30 22:05:31
> kruse-pi weewx[20342] INFO user.interceptor: unrecognized parameter
> humidity1=65Jun 30 22:05:31 kruse-pi weewx[20342] INFO user.interceptor:
> unrecognized parameter batt1=1Jun 30 22:05:31 kruse-pi weewx[20342] INFO
> user.interceptor: unrecognized parameter batt_co2=1*Jun 30 22:05:31
> kruse-pi weewx[20342] INFO weewx.manager: Added record 2022-06-30 22:05:00
> EDT (1656641100) to database 'weewx.sdb'
> Jun 30 22:05:31 kruse-pi weewx[20342] INFO weewx.manager: Added record
> 2022-06-30 22:05:00 EDT (1656641100) to daily summary in 'weewx.sdb'
> Jun 30 22:05:31 kruse-pi weewx[20342] INFO weewx.restx: Windy: Published
> record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:32 kruse-pi weewx[20342] INFO weewx.restx: WindGuru:
> Published record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:32 kruse-pi weewx[20342] INFO weewx.restx: OWM: Published
> record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:32 kruse-pi weewx[20342] INFO weewx.restx: Meteoservices:
> Published record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:32 kruse-pi weewx[20342] INFO weewx.restx: PWSWeather:
> Published record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:32 kruse-pi weewx[20342] INFO weewx.restx: WOW: Published
> record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:33 kruse-pi weewx[20342] INFO weewx.cheetahgenerator:
> Generated 8 files for report SeasonsReport in 1.92 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.restx: Wunderground-PWS:
> Published record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.imagegenerator: Generated
> 13 images for report SeasonsReport in 0.66 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.reportengine: Copied 0
> files to /var/www/html/weewx
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.cheetahgenerator:
> Generated 6 files for report SmartphoneReport in 0.07 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.imagegenerator: Generated
> 6 images for report SmartphoneReport in 0.19 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.reportengine: Copied 0
> files to /var/www/html/weewx/smartphone
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.cheetahgenerator:
> Generated 1 files for report MobileReport in 0.04 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.imagegenerator: Generated
> 4 images for report MobileReport in 0.13 seconds
> Jun 30 22:05:34 kruse-pi weewx[20342] INFO weewx.reportengine: Copied 0
> files to /var/www/html/weewx/mobile
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.944
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.9
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:05:47 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
> Jun 30 22:06:02 kruse-pi weewx[20342] INFO weewx.restx: AWEKAS: Published
> record 2022-06-30 22:05:00 EDT (1656641100)
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.944
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.7
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:06:03 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.944
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.7
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:06:19 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.938
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.7
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:06:35 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.938
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.7
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:06:52 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter stationtype=AMBWeatherV4.3.3
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter baromrelin=29.938
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter battout=1
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter maxdailygust=2.2
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter hourlyrainin=0.000
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter eventrainin=0.000
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter totalrainin=0.000
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter temp1f=79.7
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter humidity1=65
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt1=1
> Jun 30 22:07:07 kruse-pi weewx[20342] INFO user.interceptor: unrecognized
> parameter batt_co2=1
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/08de976b-c6d7-48b4-bded-9c8b98b268a9n%40googlegroups.com.
