I'm moving my WMR-918 weather station off a "well past it" Windows 7 PC onto a "not quite past it" PC running Ubuntu 20.04.4 LTS and trying to get it working with weewx.
The WMR-918 was definitely sending data to VWS on the old PC prior to the relocation, so I know it and the cable are still OK. On the Ubuntu PC I had to add a DB-9 connector with cable to the motherboard, so there may be a chance that is where the problem is, or there is some issues with enabling the serial port. weewx was installed using the deb installation method, and seems to launch OK but does not appear to generate any loop data, Serial Port appears to be there, not sure if I need to do some kind of config on it, eg 9600 baud? dmesg | grep tty [ 0.065487] printk: console [tty0] enabled [ 0.242012] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Anything obvious I've missed, known tricks with this weather station? Log to follow. Thanks, keith -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e9f96bd6-9d60-41ce-a6fb-498d478b2c0en%40googlegroups.com.
