Interesting, did you find a solution? The WH1080 transmitters can get quite wonky on their own: I have one that always resets as soon as the humidity gets too high (usually if it starts raining or sometimes just random), resulting in a new transmitter ID.. My workaround was to just use * instead of always having to manually correct the ID number in the sensor map. Works fine as long as there is just one WH1080 transmitter around. The display console on the other hand won't start to search for a new ID in less than a few hours each time
It's always helpful to use more than one SDR stick and maybe different antennas and usb cables/cable lengths to find out what could cause signal issues. Also, is it connected to ethernet or just wifi? Maybe try with or without an usb hub. [email protected] schrieb am Sonntag, 10. Juli 2022 um 17:09:47 UTC+2: > I had to rebuild my install of weewx recently as the SD card became > corrupted to the point where I couldn't even use dpkg. > > It is all back up and running now, except that every few hours it will > stop receiving data from the WH1080 transmitter whilst still receiving > data from the other 3 devices. > > I have checked on my computer which is located further away from the > WH1080 and that is receiving fine. > > Is there anything that could be interfering with just one device on > 433MHz or is something on the Pi causing it? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/453c9c36-b99f-47a0-aa61-3626baa2c26dn%40googlegroups.com.
