OK, using the setup.py method, all seems well. I was using the other method and it did not work per my first message.
Regarding my attempt to use Ubuntu, in the other thread, the failure I referred to was evidently Ubuntu crashing and corrupting ability to boot. I simply re-used my Raspbian SD and started over with WeeWx using the same Pi4. Now up and running. Whew. On Tuesday, August 16, 2022 at 11:15:50 AM UTC-7 Stephen Rogers wrote: > Hmmm. I just followed the directions on this page: > https://weewx.com/docs/debian.htm, which says it is for installing on > Debian systems. > > OK I need to go to Installation using setup.py it looks like. I found > that page here: https://weewx.com/docs/setup.htm. What are these other > instructions above? > > > On Tuesday, August 16, 2022 at 10:40:51 AM UTC-7 vince wrote: > >> Did you perhaps install the second time using the dpkg (not setup.py) >> method ? >> >> If you used setup.py, did you skip doing a 'sudo python3 setup.py >> install' after the 'python3 setup.py build' step ? >> >> The locations of stuff differs depending on which way you installed >> things. Where things are located is in the User's Guide (link) >> <https://weewx.com/docs/usersguide.htm#Where_to_find_things> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fd7f73b2-85d8-408e-b1c7-16ac4e6f9fa5n%40googlegroups.com.
