So adding the sensor_map didn't help. I am not seeing any data using the
interceptor.py looking at that Access. The Access and my Fedora VM are
plugged into the same network switch and I can access the Access website
using: http://192.168.0.245/. Based on what I read, it sounds like I may
need to plug the Access directory into another network port shared by the
Fedora VM. I do have two Ethernet adapters so I gave it a try. In this
configuration, the Acurite Access just blinks red. I don't think that
option will work.
Any other ideas? Is there anyone capturing data across the network from
the Access using the interceptor tool? Thanks in advance for your help.
Sincerely
Jeff
On Saturday, September 3, 2022 at 7:06:35 PM UTC-4 meteo219 wrote:
> Hi Vince,
>
> That was definitely part of my problem. I moved the webserver to port 81
> and no more error messages. But, now I am just getting empty queues:
>
> python3[8517]: weewx[8517] INFO user.interceptor: driver version is 0.60
> python3[8517]: weewx[8517] INFO user.interceptor: device type: wu-client
> python3[8517]: weewx[8517] INFO user.interceptor: hardware name:
> weatherstation via interceptor
> python3[8517]: weewx[8517] INFO user.interceptor: mode is listen
> python3[8517]: weewx[8517] INFO user.interceptor: listen on :80
> python3[8517]: weewx[8517] INFO user.interceptor: sensor map: {'pressure':
> 'pressure', 'barometer': 'barometer', 'outHumidity': 'humidity_out',
> 'inHumidity': 'humidity_in', 'outTemp': 'temperature_out', 'inTemp':
> 'temperature_in', 'windSpeed': 'wind_speed', 'windGust': 'wind_gust',
> 'windDir': 'wind_dir', 'windGustDir': 'wind_gust_dir', 'radiation':
> 'solar_radiation', 'dewpoint': 'dewpoint', 'windchill': 'windchill',
> 'rain': 'rain', 'rainRate': 'rain_rate', 'UV': 'uv', 'txBatteryStatus':
> 'battery', 'extraTemp1': 'temperature_1', 'extraTemp2': 'temperature_2',
> 'extraTemp3': 'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2':
> 'humidity_2', 'soilTemp1': 'soil_temperature_1', 'soilTemp2':
> 'soil_temperature_2', 'soilMoist1': 'soil_moisture_1', 'soilMoist2':
> 'soil_moisture_2', 'soilMoist3': 'soil_moisture_3', 'soilMoist4':
> 'soil_moisture_4', 'leafWet1': 'leafwetness_1', 'leafWet2':
> 'leafwetness_2', 'pm2_5': 'pm2_5', 'extraTemp4': 'temperature_4',
> 'extraTemp5': 'temperature_5', 'extraTemp6': 'temperature_6', 'extraTemp7':
> 'temperature_7', 'extraTemp8': 'temperature_8', 'extraHumid3':
> 'humidity_3', 'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5',
> 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7', 'extraHumid8':
> 'humidity_8', 'soilTemp3': 'soil_temperature_3', 'soilTemp4':
> 'soil_temperature_4'}
> python3[8517]: weewx[8517] DEBUG user.interceptor: start tcp server
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdTimeSynch
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdTimeSynch
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdConvert
> python3[8517]: weewx[8517] INFO weewx.engine: StdConvert target unit is 0x1
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdConvert
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdCalibrate
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdCalibrate
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdQC
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdQC
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.wxservices.StdWXCalculate
> python3[8517]: weewx[8517] INFO weewx.wxservices: StdWXCalculate will use
> data binding wx_binding
> python3[8517]: weewx[8517] DEBUG weewx.manager: Daily summary version is
> 4.0
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.wxservices.StdWXCalculate
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdWXXTypes
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.wxxtypes.StdWXXTypes
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdPressureCooker
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.wxxtypes.StdPressureCooker
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdRainRater
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.wxxtypes.StdRainRater
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.wxxtypes.StdDelta
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.wxxtypes.StdDelta
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdArchive
> python3[8517]: weewx[8517] INFO weewx.engine: Archive will use data
> binding wx_binding
> python3[8517]: weewx[8517] INFO weewx.engine: Record generation will be
> attempted in 'hardware'
> python3[8517]: weewx[8517] INFO weewx.engine: Using archive interval of
> 300 seconds (specified in weewx configuration)
> python3[8517]: weewx[8517] DEBUG weewx.engine: Use LOOP data in hi/low
> calculations: 1
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdArchive
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdStationRegistry
> python3[8517]: weewx[8517] INFO weewx.restx: StationRegistry: Station will
> be registered.
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdStationRegistry
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdWunderground
> python3[8517]: weewx[8517] INFO weewx.restx: Wunderground: Posting not
> enabled.
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdWunderground
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdPWSweather
> python3[8517]: weewx[8517] INFO weewx.restx: PWSweather: Posting not
> enabled.
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdPWSweather
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdCWOP
> python3[8517]: weewx[8517] INFO weewx.restx: CWOP: Data for station EW7458
> will be posted
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdCWOP
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdWOW
> python3[8517]: weewx[8517] INFO weewx.restx: WOW: Posting not enabled.
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdWOW
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.restx.StdAWEKAS
> python3[8517]: weewx[8517] INFO weewx.restx: AWEKAS: Posting not enabled.
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.restx.StdAWEKAS
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdPrint
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdPrint
> python3[8517]: weewx[8517] DEBUG weewx.engine: Loading service
> weewx.engine.StdReport
> python3[8517]: weewx[8517] INFO weewx.engine: 'pyephem' detected, extended
> almanac data is available
> python3[8517]: weewx[8517] DEBUG weewx.engine: Finished loading service
> weewx.engine.StdReport
> python3[8517]: weewx[8517] INFO __main__: Starting up weewx version 4.8.0
> python3[8517]: weewx[8517] DEBUG weewx.engine: Station does not support
> reading the time
> python3[8517]: weewx[8517] INFO weewx.engine: Using binding 'wx_binding'
> to database 'weewx.sdb'
> python3[8517]: weewx[8517] INFO weewx.manager: Starting backfill of daily
> summaries
> python3[8517]: weewx[8517] INFO weewx.manager: Daily summaries up to date
> python3[8517]: weewx[8517] INFO weewx.engine: Starting main packet loop.
> python3[8517]: weewx[8517] DEBUG weewx.manager: Daily summary version is
> 4.0
> python3[8517]: weewx[8517] DEBUG user.interceptor: empty queue
>
> I think that I am getting real close now. I have some ideas such as
> putting the sensor_map code back in place to see if that helps.
>
> Thanks again,
>
> Jeff
>
>
>
>
> On Sat, Sep 3, 2022 at 6:02 PM vince <[email protected]> wrote:
>
>> On Saturday, September 3, 2022 at 2:52:43 PM UTC-7 meteo219 wrote:
>>
>>> I do have a webserver on my weewx device (192.168.0.98) running Fedora
>>> 36 so yes that error does make sense.
>>>
>>
>> So.....perhaps you might try shutting down your webserver (temporarily)
>> or run it on a different port.
>>
>> You can't bind to a port that is already in use.
>>
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/weewx-user/TuaSMUbgBFg/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/e446d79b-2a07-4789-ae81-59db6b29f77en%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/e446d79b-2a07-4789-ae81-59db6b29f77en%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/a6a5343d-4703-430f-b60a-70ee1be8a393n%40googlegroups.com.
