I ment to say I used port stting the first time using /dev/ttyUSB0
not /dev/ttyS0.. thanks
On Thursday, November 10, 2022 at 2:41:06 PM UTC-6 Tim Williams wrote:
I'm trying to run my vantage vue on my Laptop with Linux mint 20.3 to save
elec energy but I am so new at this it is frustrating . so please be
patient with this newbe ....thanks :)
I corrected duplicate lLattitude and Longitude and then restarted weewx
but still no luck . Seems to be something to do with my port setting as
this log indicated. At first stopped weewx and edited con.. I chose the
/dev/ttyS0 and restarted weewx..log critical errors on the port setting.
So I edited weewx again this time using the serial port /dev/ttyS0. And the
log shows critical error again. What am I doing wrong?
On Thursday, November 10, 2022 at 2:41:06 PM UTC-6 Tim Williams wrote:
> I'm trying to run my vantage vue on my Laptop with Linux mint 20.3 to save
> elec energy but I am so new at this it is frustrating . so please be
> patient with this newbe ....thanks :)
> I corrected duplicate lLattitude and Longitude and then restarted weewx
> but still no luck . Seems to be something to do with my port setting as
> this log indicated. At first stopped weewx and edited con.. I chose the
> /dev/ttyS0 and restarted weewx..log critical errors on the port setting.
> So I edited weewx again this time using the serial port /dev/ttyS0. And the
> log shows critical error again. What am I doing wrong?
>
>
> weewx[7330] CRITICAL weewx.engine: **** raise
> SerialException("Could not configure port: {}".format(msg))
> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL weewx.engine:
> **** serial.serialutil.SerialException: Could not configure port: (5,
> 'Input/output error')
> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL __main__:
> Unable to load driver: Could not configure port: (5, 'Input/output error')
> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL __main__:
> **** Exiting...
>
> On Thursday, November 10, 2022 at 1:28:23 PM UTC-6 Tim Williams wrote:
>
>> ThanYk forresponce, Yes it is doubled . How do you fix it?
>> # Description of the station location
>> location = "SDora"
>>
>> # Latitude in decimal degrees. Negative for southern hemisphere
>> latitude = 36.7680 -92.2672
>> # Longitude in decimal degrees. Negative for western hemisphere.
>> longitude = 36.7680 -92.2672
>>
>> # Altitude of the station, with the unit it is in. This is used only
>> # if the hardware cannot supply a value.
>> altitude = 951, foot
>>
>> # Set to type of station hardware. There must be a corresponding
>> stanza
>> # in this file, which includes a value for the 'driver' option.
>> station_type = Vantage
>>
>> # If you have a website, you may specify an URL. This is required if
>> you
>> # intend to register your station.
>> #station_url = http://www.example.com
>>
>> # The start of the rain year (1=January; 10=October, etc.). This is
>> # downloaded from the station if the hardware supports it.
>> rain_year_start = 1
>>
>> # Start of week (0=Monday, 6=Sunday)
>> week_start = 6
>>
>> ########################################
>>
>> On Thursday, November 10, 2022 at 12:55:17 PM UTC-6 vince wrote:
>>
>>> Lets see your latitude and longitude lines in weewx.conf
>>> I suspect you have two numbers on the latitude line...
>>>
>>> On Thursday, November 10, 2022 at 10:51:40 AM UTC-8 [email protected]
>>> wrote:
>>>
>>>> Hi to all, For what ever reason weewx will not work after
>>>> installing via the instructions here:
>>>> https://www.weewx.com/docs/debian.htm As a nwbe to weewx and linux
>>>> so all help is appreciated Thanks
>>>>
>>>> Here is what I get on the log report:
>>>>
>>>> Here is what I get on the log report:
>>>>
>>>> sudo tail -f /var/log/syslog
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** could not convert string to float: '36.7680 -92.2672'
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** Traceback (most recent call last):
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** File "/usr/share/weewx/weewxd", line 148, in main
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** engine = weewx.engine.StdEngine(config_dict)
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** File "/usr/share/weewx/weewx/engine.py", line 84, in __init__
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** self.stn_info = weewx.station.StationInfo(self.console,
>>>> **config_dict['Station'])
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** File "/usr/share/weewx/weewx/station.py", line 51, in __init__
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** self.latitude_f = float(stn_dict['latitude'])
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** ValueError: could not convert string to float: '36.7680 -92.2672'
>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL __main__:
>>>> **** Exiting.
>>>>
>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/952df87c-e7da-434d-8f58-0332275e67b6n%40googlegroups.com.
