Add ignore=true to the ones you want to.....ignore...
[[[ecowitt/loop]]]
[[[[outTemp_F]]]]
name = extraTemp1
units = degree_F
[[[[extraTemp5_F]]]]
name = extraTemp5
units = degree_F
[[[[dateTime]]]]
ignore = True
[[[[usUnits]]]]
ignore = True
On Wednesday, November 16, 2022 at 9:48:36 AM UTC-8 [email protected]
wrote:
> I'm currently running Weewx 4.9.1 and using WeeWX-MQTTSubscribe to capture
> data from 2 separate RTL SDR's. One of the RTL-SDR devices is listening on
> 433.92 and is picking up weather data from a couple nearby weather
> stations. One of the weather stations I'm listening to has a bad wind
> sensor, so I do not want the wind data from that station, the other station
> has good wind data so I do want that data. These two stations are from the
> same manufacturer and fall under the same device decoding protocol ( [40]
> Acurite 592TXR Temp/Humidity, 5n1 Weather Station, 6045 Lightning, 899
> Rain, 3N1, Atlas).
>
> The other RTL-SDR is listening on 915.00 in order to pick up pressure data
> from another sensor.
>
> When using
> `rtl_433 -F json -M utc -R 40 | mosquitto_pub -t weather/radio -h
> localhost -l`
>
> I receive all packets from both stations and pass that to the
> WeeWX-MQTTSubscribe driver where I have set up the various fields and map
> them to weewx. For example, the wind data:
>
> [[topics]]
> unit_system = US
> [[[weather/radio]]]
>
> ... snip ...
> [[[[*wind_avg_km_h*]]]]
> name = windSpeed
>
> [[[[*wind_dir_deg*]]]]
> name = windDir
>
> ... snip ...
>
> since both stations emit, for example, 'wind_avg_km_h', I don't have a way
> to filter out one of them (the bad one) so I end up getting some garbage
> data in the mix with good data.
>
> My question is this: since these two stations are the same 'device
> decoding protocol' (40) is there a way to differentiate between the json
> data coming from the one vs the other? The both have different [[[[id]]]]
> fields, the one I want has an ID of 3522 and the one I don't want wind data
> from is ID 2849.
>
> Essentially I want to keep data from both devices but exclude just the
> wind data from one of them.
>
> Thanks much for any help you all can provide.
>
> Bryan
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/08d74afd-f68a-4f0a-a808-666498b6b4d2n%40googlegroups.com.
