Sorry - it does not mention that in the documentation. But neither 0.5 not 0.99 changes anything :-(
On Sunday, December 4, 2022 at 8:53:57 PM UTC+1 [email protected] wrote: > The image generator will only accept values between 0 and 1. Try 0.5. > > On Sun, Dec 4, 2022 at 11:47 AM [email protected] < > [email protected]> wrote: > >> Upping it to 10 or even 100 did unfortunately not change anything.. >> The original global value was 0.01. >> >> On Sunday, December 4, 2022 at 8:29:21 PM UTC+1 [email protected] wrote: >> >>> If this is the case, then the most likely problem is too low a number >>> for "line_gap_fraction". Try upping it to 0.5, or even higher. >>> >>> On Sun, Dec 4, 2022 at 10:13 AM [email protected] < >>> [email protected]> wrote: >>> >>>> I have now tried to change the driver, so all reports send to weewx >>>> contains a 'rain'. This seems to work around the problem (see attached >>>> graph). >>>> This workaround will require me to alter the database (which is not a >>>> big issue) for older observations, but it is in my eyes not a good >>>> solution. On the other hand, it seems to point at 'rain' records being >>>> 'None' is causing the problem.. >>>> >>>> I have tried to play around with the get_scalar function in >>>> wxxtypes.py, as it contains references to cumulative, and it could have >>>> something to do with it, but with no effect. >>>> >>>> Regards >>>> Henrik Ostergaard >>>> >>>> On Sunday, December 4, 2022 at 4:55:42 PM UTC+1 [email protected] >>>> wrote: >>>> >>>>> Thanks for the answer! >>>>> Very interesting that it is working for you! >>>>> I have attached the requested files. >>>>> One note: I get sensor data from multiple sources through the same >>>>> driver, meaning that the packets send to Weewx mostly does not have any >>>>> rain entry. I wonder if it would help to just always add a rain zero.. I >>>>> can try that. >>>>> Btw, the server can be seen on vejr.ostergaard.net. >>>>> Weewx version 4.9.1. >>>>> >>>>> Regards >>>>> Henrik Ostergaard >>>>> >>>>> On Sunday, December 4, 2022 at 2:06:09 PM UTC+1 [email protected] >>>>> wrote: >>>>> >>>>>> Just tried it, and it works for me. >>>>>> >>>>>> [image: image.png] >>>>>> >>>>>> It's hard to go any further without seeing your configuration files. >>>>>> Post the [StdReport] section of weewx.conf, and the entire skin.conf of >>>>>> whatever skin you are using (looks like Standard). >>>>>> >>>>>> -tk >>>>>> >>>>>> On Sun, Dec 4, 2022 at 4:10 AM [email protected] < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> A few years ago, I came up with the cumulative aggregation type >>>>>>> specifically for total rain graphs. Since then, Weewx has been updated >>>>>>> a >>>>>>> few times, and now the cumulative aggregation seems broken. >>>>>>> >>>>>>> It correctly sums up the totals, but the graphs will show zero (or >>>>>>> None?) for intervals without rain, in stead of shoving the total so far. >>>>>>> >>>>>>> I have been looking a little into this, but I could not readily see >>>>>>> where the problem is. If somebody could point me in the right >>>>>>> direction, I >>>>>>> would be happy to give it a try to fix it. >>>>>>> >>>>>>> If it is just a setting, I have missed, please let me know. >>>>>>> >>>>>>> I have enclosed an example of a daily total rain, and a yearly to >>>>>>> show how I would have expected it (almost). >>>>>>> >>>>>>> Regards >>>>>>> Henrik Ostergaard >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/5c24114c-965d-4095-9b29-a29c89f1ce22n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/5c24114c-965d-4095-9b29-a29c89f1ce22n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/1f0ab70e-3e92-47af-b74a-5e250890e60bn%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/1f0ab70e-3e92-47af-b74a-5e250890e60bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/ab95a272-4ee0-41f1-89e8-1f86a4c42273n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/ab95a272-4ee0-41f1-89e8-1f86a4c42273n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/aba0def4-fc60-4057-a88e-f714d2ed8734n%40googlegroups.com.
