I was hoping to get different info from the wxforum - downgrade info, or
similar experience, wasn't expecting a deepdive (not complaining though,
been a useful exercise, as I know more about weewx and python than i did
before).
the missing '/' has resolved the issue. If i'm honest, I don't recall it
being there before.
Much appreciated, thank you.
On Saturday, 17 December 2022 at 22:03:53 UTC lang....@googlemail.com wrote:
> I think you posted the same issue in the wxforum - read your thread there
> - as it looks you have simply not properly configured the custom server in
> your console.
>
> You missed putting a "/" as minimal entry in the "path" field. No entry
> there = no posting by the console.
> This may - or may not - have disappeared during the WiFi firmware update.
>
> That the other postings to the other (standard) weather services still
> work is only a weak indication - there you cannot customize anything =>
> also not forget anything 😉
> On 17.12.2022 22:24, gjr80 wrote:
>
> You need to provide a log extract with debug = 1. To do this edit
> weewx.conf, set debug = 1, save weewx.conf and restart WeeWX. Let WeeWX
> run for at least two archive periods and the make a copy of the log from
> WeeWX startup through until the end of the two archive periods. Make sure
> you capture the full WeeWX startup in the log extract. Post the log extract
> here. This should show details of exactly what the interceptor driver is
> receiving and what it is doing with the received data.
>
> Gary
> On Saturday, 17 December 2022 at 21:47:24 UTC+10 darth...@googlemail.com
> wrote:
>
>> this is everything from weewx in syslog:
>>
>> Dec 17 11:00:55 syslog systemd[1]: Starting LSB: weewx weather system...
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__:
>> Initializing weewx version 4.9.1
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__: Using
>> Python 3.7.3 (default, Jan 22 2021, 20:04:44)
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__:
>> Located at /bin/python3
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__:
>> Platform Linux-5.10.103-v7l+-armv7l-with-debian-10.12
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__: Locale
>> is 'en_GB.UTF-8'
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__: Using
>> configuration file /etc/weewx/weewx.conf
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__: Debug
>> is 1
>> Dec 17 11:00:55 syslog python3[22791]: weewx[22791] INFO __main__: PID
>> file is /var/run/weewx.pid
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Loading station type Interceptor (user.interceptor)
>> Dec 17 11:00:56 syslog weewx[22781]: Starting weewx weather system: weewx.
>> Dec 17 11:00:56 syslog systemd[1]: Started LSB: weewx weather system.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> user.interceptor: driver version is 0.53
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> user.interceptor: device type: ecowitt-client
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> user.interceptor: mode is listen
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> user.interceptor: listen on :8080
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> user.interceptor: sensor map: {'pressure': 'pressure', 'barometer':
>> 'barometer', 'outHumidity': 'humidity_out', 'inHumidity': 'humidity_in',
>> 'outTemp': 'temperature_out', 'inTemp': 'temperature_in', 'windSpeed':
>> 'wind_speed', 'windGust': 'wind_gust', 'windDir': 'wind_dir',
>> 'windGustDir': 'wind_gust_dir', 'radiation': 'solar_radiation', 'dewpoint':
>> 'dewpoint', 'windchill': 'windchill', 'rain': 'rain', 'rainRate':
>> 'rain_rate', 'UV': 'uv', 'txBatteryStatus': 'battery', 'extraTemp1':
>> 'temperature_1', 'extraTemp2': 'temperature_2', 'extraTemp3':
>> 'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2': 'humidity_2',
>> 'soilTemp1': 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2',
>> 'soilMoist1': 'soil_moisture_1', 'soilMoist2': 'soil_moisture_2',
>> 'soilMoist3': 'soil_moisture_3', 'soilMoist4': 'soil_moisture_4',
>> 'leafWet1': 'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5',
>> 'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6':
>> 'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8':
>> 'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4',
>> 'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7':
>> 'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3':
>> 'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> StdConvert target unit is 0x1
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO
>> weewx.wxservices: StdWXCalculate will use data binding wx_binding
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Archive will use data binding wx_binding
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Record generation will be attempted in 'hardware'
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Using archive interval of 300 seconds (specified in weewx configuration)
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> StationRegistry: Registration not requested.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> Wunderground: Posting not enabled.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> PWSweather: Posting not enabled.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> CWOP: Posting not enabled.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> WOW: Posting not enabled.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.restx:
>> AWEKAS: Posting not enabled.
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> 'pyephem' not detected, extended almanac data is not available
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO __main__:
>> Starting up weewx version 4.9.1
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Using binding 'wx_binding' to database 'weewx.sdb'
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.manager:
>> Starting backfill of daily summaries
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.manager:
>> Daily summaries up to date
>> Dec 17 11:00:56 syslog python3[22795]: weewx[22795] INFO weewx.engine:
>> Starting main packet loop.
>>
>> As noted earlier, pretty sure that the firmware update broke this (it was
>> the only change). Also, the WOW / WU updates etc are from the station, not
>> weewx.
>> On Saturday, 17 December 2022 at 11:30:50 UTC Dave Curr wrote:
>>
>>> I updated my WS2900 to EasyWeather v1.6.4 this morning, and weewx is no
>>> longer updating at all. I was on 4.8.0 when it broke, and I have updated to
>>> 4.9.1 with no change.
>>>
>>> using wireshark, I can see the http POSTs come in every minute as
>>> configured -
>>>
>>> POST HTTP/1.1
>>>
>>> HOST: [removed]
>>>
>>> Connection: Close
>>>
>>> Content-Type: application/x-www-form-urlencoded
>>>
>>> Content-Length: 464
>>>
>>>
>>> PASSKEY=[removed]&stationtype=EasyWeatherV1.6.4&dateutc=2022-12-17+10:17:43&tempinf=62.2&humidityin=42&baromrelin=29.782&baromabsin=30.074&tempf=30.0&humidity=92&winddir=20&windspeedmph=0.2&windgustmph=1.1&maxdailygust=3.4&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.031&monthlyrainin=0.122&yearlyrainin=39.295&totalrainin=39.295&solarradiation=45.87&uv=0&wh65batt=0&freq=868M&model=WS2900_V2.01.08
>>>
>>> The response is
>>>
>>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
>>>
>>> "http://www.w3.org/TR/html4/strict.dtd";>
>>>
>>> <html>
>>>
>>> <head>
>>>
>>> <meta http-equiv="Content-Type" content="text/html;charset=utf-8">
>>>
>>> <title>Error response</title>
>>>
>>> </head>
>>>
>>> <body>
>>>
>>> <h1>Error response</h1>
>>>
>>> <p>Error code: 400</p>
>>>
>>> <p>Message: Bad HTTP/0.9 request type ('POST').</p>
>>>
>>> <p>Error code explanation: HTTPStatus.BAD_REQUEST - Bad request syntax
>>> or unsupported method.</p>
>>>
>>> </body>
>>>
>>> </html>
>>>
>>> It has been working fine on 4.8.0 since October, and on previous
>>> versions since April 2021. Pretty sure the firmware update has caused this,
>>> but curious as to why it would result in the above. Wunderground, WOW and
>>> Weathercloud still receive updates as intended.
>>>
>>> Anything else I can do to find more details?
>>>
>>> Thanks
>>>
>>>
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/33176eff-9045-4d9b-8083-8a4f4ed01607n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/33176eff-9045-4d9b-8083-8a4f4ed01607n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c2d19379-e8ca-49e9-b679-6add441e4b50n%40googlegroups.com.
