OK, if not a bug, then let's define the default for users who live above 
5,000 ft. :)

I think it's far more reasonable to set defaults so that under ANY normal 
conditions, users will not see an error. YES, let them tune the default to 
a narrower range if they want.

On Thursday, March 3, 2022 at 10:17:58 PM UTC-7 gjr80 wrote:

> It's not a bug but a set of defaults provided under [StdQC] in weewx.conf 
> for the user to tailor to their needs. Once you set them to suit your needs 
> they will remain that way across WeeWX upgrades etc until you change them.
>
> Gary
>
> On Friday, 4 March 2022 at 12:59:36 UTC+10 [email protected] wrote:
>
>> Hi all,
>> Experienced tech (HW, SW, FW and more), brand new to WeeWX. Have had my 
>> WeatherFlow Tempest running for a couple of months.
>>
>> On initial setup, I just discovered that weewx thinks my barometric 
>> pressure is out of range! I thought that was interesting.
>>
>> I consider this a bug: 
>>
>>    - The adjusted sea level barometer is just fine, and within expected 
>>    range
>>    - But my actual pressure is considered too low.
>>    - Not a surprise: we live in Colorado *near* the mountains at a bit 
>>    over 7000 ft -- so our raw pressure is about 3/4 of sea level. People not 
>>    far from me live over 10000 ft ! And there's a weather station on top of 
>> a 
>>    nearby mountain at over 14000 ft.
>>    - The current accepted default pressure is 24 inHG. That's 2 in below 
>>    the typical minimum seen in the middle of a tornado.
>>    - I suggest either dynamically calculating what's acceptable based on 
>>    altitude, or changing this to allow up to 15,000 ft stations. I doubt we 
>>    would see tornados at 15000 ft, but we DO see some at 7000 ft. 
>>    - All things considered, I would suggest a minimum of 17 for 7000 ft, 
>>    14 for 15000 ft.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/20f14c3c-e03f-4adf-a351-b35ef37c4bf0n%40googlegroups.com.

Reply via email to