I think the problem was in the ftp-server - now I am near a solution. However, while waiting, I installed weewx 4.10.1, and used my old configuration, installing in /home/jjk/weewx:
############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = /home/jjk/weewx # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 4.10.1 ############################################################################## # This section is for information about the station. However, when I use sudo cp util/systemd/weewx.service /etc/systemd/system sudo systemctl enable weewx sudo systemctl start weewx it apparently starts, but when checking with sudo tail -f /var/log/syslog, it has exited, haven't been able to find: Feb 20 14:19:58 raspberrypi systemd[5453]: weewx.service: Failed to execute command: No such file or directory Feb 20 14:19:58 raspberrypi systemd[5453]: weewx.service: Failed at step EXEC spawning /home/weewx/bin/weewxd: No such file or directory Feb 20 14:19:58 raspberrypi systemd[1]: weewx.service: Main process exited, code=exited, status=203/EXEC Feb 20 14:19:58 raspberrypi systemd[1]: weewx.service: Failed with result 'exit-code'. - apparently, it is looking for weewxd in the default directory, and not in /home/jjk/weewx? I must have missed something? Jens-Jørgen Kjærgaard Tuenvej 818 9870 Sindal +45 21204417 www.jensjk.dk Den søn. 19. feb. 2023 kl. 19.09 skrev vince <[email protected]>: > On Sunday, February 19, 2023 at 3:55:23 AM UTC-8 Tom Keffer wrote: > The article that Vince linked to is where to find the results in the WWW, > not where to have FTP upload to. > > > Sigh - yes. Agree. Sorry for the confusion. > The webserver could be mapping a user's public_html to the path in the > link I provided. > > Keep trying different paths. For example, path = public_html/hytte (no > leading slash). > > > Agree. I'd try that next. > The leading slash in the previous posts is very likely wrong. > > Also, you may have the right path, but the wrong permissions on the > server. Log into the web server (if you can) and make sure that the > permissions have been set correctly. > > Agree. Manually ftp 'any' file from the shell and see if it works. > > To figure it all out, a manual ftp from the shell would likely answer the > questions. > > - ftp linux83.unoeuro.com > - when prompted, enter your username > - when prompted, enter its password > - the prompt will change to ftp> > - then you can use the 'pwd' command to get the full pathname for > your user's home directory > - you can run the 'ls' command to see if there's a public_html tree > there and what it's permissions are > - enter 'bye' to exit > > pi@raspberrypi:~ $ ftp pi > Connected to pi. > 220 raspberrypi FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready. > Name (pi:pi): pi > 331 Password required for pi. > Password: > 230- > 230- The programs included with the Debian GNU/Linux system are free > software; > 230- the exact distribution terms for each program are described in the > 230- individual files in /usr/share/doc/*/copyright. > 230- > 230- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent > 230- permitted by applicable law. > 230 User pi logged in. > Remote system type is UNIX. > Using binary mode to transfer files. > ftp> pwd > 257 "/home/pi" is current directory. > ftp> ls > 200 PORT command successful. > 150 Opening ASCII mode data connection for '/bin/ls'. > total 132 > -rw------- 1 pi pi 6562 Feb 8 13:01 .bash_history > -rw-r--r-- 1 pi pi 220 Dec 2 2020 .bash_logout > -rw-r--r-- 1 pi pi 3523 Dec 2 2020 .bashrc > -rw------- 1 pi pi 40 Jun 27 2021 .lesshst > -rw-r--r-- 1 pi pi 807 Dec 2 2020 .profile > -rw-r--r-- 1 pi pi 75 May 26 2021 .selected_editor > drwx------ 2 pi pi 4096 Dec 7 2021 .ssh > -rw------- 1 pi pi 8626 Jun 27 2021 .viminfo > -rw-r--r-- 1 pi pi 53 May 26 2021 .vimrc > 226 Transfer complete. > ftp> bye > 221 Goodbye. > > > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/bOo_GqhTdh0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/72187f72-7039-4405-9a7d-ade073340459n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/72187f72-7039-4405-9a7d-ade073340459n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAJPduSQDWQiv%2Bc5mxhyVreBpshaYR7OKqfr9jkHk%2Bvwa4QLLuQ%40mail.gmail.com.
