Nope. I think you have typos in there. You have ST_nnnnn as well as
ST-nnnnn.
On Wednesday, February 22, 2023 at 1:53:05 PM UTC-8 Patrick Mendiuk wrote:
> Has there been a change to the Weatherflow UDP format? I have a WeeWX
> 3.9.1 installation that has been running without issue with Weatherflow Sky
> and Air Sensors. The Weatherflow Sky sensor partially failed and I wanted
> to replace the Sky data with Tempest data but I am not seeing any updates
> for those fields after editing weewx.conf and restarting WeeWX. When I
> look at syslog I see this for the Sky sensor:
>
> Feb 22 13:08:39 MITX-6930 weewx[31934]: weatherflowudp: MainThread: raw
> packet: {'serial_number': 'SK-00015052', 'type': 'rapid_wind', 'ob':
> [1677100117, 0.52, 170], 'hub_sn': 'HB-00011764'}
> Feb 22 13:08:39 MITX-6930 weewx[31934]: weatherflowudp: MainThread: parsed
> packet: {'serial_number.SK_00015052.rapid_wind': 'SK-00015052',
> 'type.SK_00015052.rapid_wind': 'rapid_wind',
> 'hub_sn.SK_00015052.rapid_wind': 'HB-00011764',
> 'time_epoch.SK_00015052.rapid_wind': 1677100117,
> 'ob.SK_00015052.rapid_wind': [1677100117, 0.52, 170],
> 'wind_speed.SK_00015052.rapid_wind': 0.52,
> 'wind_direction.SK_00015052.rapid_wind': 170, 'time_epoch': 1677100117}
>
> For the Tempest Sensor I see this:
>
> Feb 22 13:08:39 MITX-6930 weewx[31934]: weatherflowudp: MainThread: Loop
> packet: {'windDir': 170, 'windSpeed': 0.52, 'usUnits': 17, 'dateTime':
> 1677100117}
> Feb 22 13:08:47 MITX-6930 weewx[31934]: weatherflowudp: MainThread: raw
> packet: {'firmware_revision': 172, 'serial_number': 'ST-00060370', 'type':
> 'obs_st', 'obs': [[1677100124, 1.36, 1.81, 2.31, 34, 20, 992.97, 0.13,
> 90.52, 55199, 2.28, 460, 0.0, 0, 0, 0, 2.713, 1]], 'hub_sn': 'HB-00016474'}
> Feb 22 13:08:47 MITX-6930 weewx[31934]: weatherflowudp: MainThread: parsed
> packet: {'serial_number.ST_00060370.obs_st': 'ST-00060370',
> 'obs.ST_00060370.obs_st': [[1677100124, 1.36, 1.81, 2.31, 34, 20, 992.97,
> 0.13, 90.52, 55199, 2.28, 460, 0.0, 0, 0, 0, 2.713, 1]],
> 'type.ST_00060370.obs_st': 'obs_st', 'hub_sn.ST_00060370.obs_st':
> 'HB-00016474', 'firmware_revision.ST_00060370.obs_st': 172}
> Feb 22 13:08:47 MITX-6930 weewx[31934]: weatherflowudp: MainThread: Loop
> packet: {}
>
> I don't see any updates for the Weatherflow UDP driver since 2020 so I am
> wondering if the Weatherflow UDP format for the Tempest sensor changed
> since then.
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2aee8f61-dd11-4ee0-9278-998319dd2509n%40googlegroups.com.
