Thanks! The Corrections in StdCalibrate did the trick. I didn't need to change to software record generation.
On Friday, 17 March 2023 at 15:04:54 UTC Tom Keffer wrote: > Try setting it to None in [StdCalibrate]: > > [StdCalibrate] > [[Corrections]] > rain = None > rainRate = None > > You may also have to switch to software record generation. I'm not sure. > > [StdArchive] > record_generation = software > > > > On Fri, Mar 17, 2023 at 6:44 AM Tom <[email protected]> wrote: > >> I have a Davis Vantage Pro 2. My ISS is currently out of action and I >> just have an anemometer connected via an additional wireless sensor >> transmitter. >> >> Due to not having an ISS no rain data can be recorded. However - unlike >> the other sensors (outdoor temp, outdoor humidity, etc...) the "Daily rain" >> is still shown as 0.0 on the console (the other sensors show "- -"). >> The rain is still being sent through in the loop packets and filling my >> weewx DB with 0 values for rain - which is wrong. I'd like to not record >> rain until I get my ISS with rain collector up and running again. >> >> Is there a way to tell weewx to ignore the rain data in the loop packets? >> >> Thanks >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/76005b11-9517-4ed4-8df6-a8009f0443f7n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/76005b11-9517-4ed4-8df6-a8009f0443f7n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7bbaef26-e1a7-4b04-bd92-bd05fe765c1cn%40googlegroups.com.
