By 'SteelSeries gauges graphs' I presume you mean the graphs that appear
when you mouseover the gauge faces. If so you should be able to change the
units used in the plots by changing the unit group settings in weewx.conf
[StdReport] [[SteelSeries]]. The default settings should look something
like:
[StdReport]
....
[[SteelSeries]]
....
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot # foot or meter
group_pressure = hPa # hPa, inHg or mbar
group_rain = mm # mm or inch
group_rainRate = mm_per_hour # mm_per_hour or
inch_per_hour
group_speed = km_per_hour # km_per_hour, mile_per_hour,
# meter_per_second or knot
group_temperature = degree_C # degree_C or degree_F
To change the temperature to display in Fahrenheit change degree_C to
degree_F, save the file and on the next report cycle the temperature based
plots should change to display Fahrehnheit. You can change any of the unit
group settings to suit, but note the SteelSeries gauges only support a
limited subset of the available WeeWX units.
Note that change to these unit groups will also change the units appearing
in the gauge-data.txt file used by the SteelSeries gauges, this is fine but
you will find the default unit displayed on the gauges will be as set above
(which probably suits).
Gary
On Monday, 3 April 2023 at 23:24:20 UTC+10 [email protected] wrote:
> I don't know why I haven't noticed this before but my SteeleSeries gauges
> graphs are showing metric data instead of imperial.
>
> I have tried switching the radio buttons with no effect.
>
> How/where do I chnge these?
>
> Thanks
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/375b2be9-7ecc-4a94-b94e-f351e63b0a47n%40googlegroups.com.
