I was able to get the test message no problem so it seems mosquitto is set
up correctly yet I am still unable to get anything more than Connected.
Waiting for data using my local url and remotely I get Connecting to
weather station real time
still where I left off.
On Saturday, May 6, 2023 at 4:40:59 PM UTC-4 vince wrote:
> doh - I of course got those sub/pub commands backward. You use the -m
> message for publishing. Sorry for the confusion.
>
>
>
> - subscribe in one window => mosquitto_sub -h x.x.x.x -t junk/testing
> -u mosquittoUserHere -P mosquittoPassHere
>
>
> - publish a test in another => mosquitto_pub -h x.x.x.x -t
> junk/testing -u mosquittoUserHere -P mosquittoPassHere -m testing123
>
> I added password protection to my pi setup and it works fine there and
> after restarting weewx (after editing weewx.conf). Updated the github
> page to show the edits I made.
>
> I did need to create the MQTT password file so the specified user/pass is
> there. Remember it's not an account password. It's just a user/pass
> combination for connecting to your MQTT server.
>
> On Saturday, May 6, 2023 at 1:23:20 PM UTC-7 vince wrote:
>
>> It's not hanging. It is not hearing anything. Hit control-C to stop
>> listening with mosquitto_sub.
>>
>> On mine I see the loop messages every couple seconds basically
>> immediately. I hit control-C after the first loop packet was displayed.
>>
>> $ mosquitto_sub -d -t simulator/# -h 192.168.1.232
>> Client null sending CONNECT
>> Client null received CONNACK (0)
>> Client null sending SUBSCRIBE (Mid: 1, Topic: simulator/#, QoS: 0,
>> Options: 0x00)
>> Client null received SUBACK
>> Subscribed (mid: 1): 0
>> Client null received PUBLISH (d0, q0, r0, m0, 'simulator/loop', ... (1255
>> bytes))
>> {"dateTime": "1683403745.0", "usUnits": "1.0", "outTemp_F":
>> "30.714330964267866", "inTemp_F": "64.4867113429638", "barometer_inHg":
>> "31.022674842890833", "pressure_inHg": "31.022674842890833",
>> "windSpeed_mph": "0.3866257855458439", "windDir": "346.0814717203496",
>> "windGust_mph": "0.46395094265501235", "windGustDir": "346.0814717203496",
>> "outHumidity": "77.68024528672494", "inHumidity": "27.026577314072398",
>> "radiation_Wpm2": "911.9394844177033", "UV": "12.767152781847846",
>> "rain_in": "0.0", "txBatteryStatus": "1.0", "windBatteryStatus": "0.0",
>> "rainBatteryStatus": "0.0", "outTempBatteryStatus": "1.0",
>> "inTempBatteryStatus": "0.0", "consBatteryVoltage_volt": "12.0",
>> "heatingVoltage_volt": "12.876232859402455", "supplyVoltage_volt": "12.0",
>> "referenceVoltage_volt": "11.725352060455753", "rxCheckPercent":
>> "58.589515129677444", "altimeter_inHg": "31.812916691917174", "appTemp_F":
>> "25.97065488238462", "cloudbase_foot": "2093.2738825982638", "dewpoint_F":
>> "24.583925880835505", "heatindex_F": "30.714330964267866", "humidex_F":
>> "30.714330964267866", "inDewpoint_F": "29.791543533239455",
>> "maxSolarRad_Wpm2": "0.0", "rainRate_inch_per_hour": "0.0", "windchill_F":
>> "30.714330964267866", "hourRain_in": "0.0", "rain24_in": "0.0",
>> "dayRain_in": "0.0"}
>> Client null received PUBLISH (d0, q0, r0, m0, 'simulator/loop', ... (1236
>> bytes))
>> ^CClient null sending DISCONNECT
>>
>>
>> Test your mosquitto server...
>>
>> - subscribe in one window => mosquitto_sub -h x.x.x.x -t junk/testing
>> -u mosquittoUserHere -P mosquittoPassHere -m testing123
>> - publish a test in another => mosquitto_pub -h x.x.x.x -t
>> junk/testing -u mosquittoUserHere -P mosquittoPassHere
>>
>> If that doesn't work, your mosquitto setup is messed up.
>>
>> It ain't rocket science unless you are running a funky os variant or you
>> have enabled packet filters blocking incoming traffic to the MQTT or
>> Websockets ports.
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/1c43be17-2b6d-4aea-a22f-69ea19576e82n%40googlegroups.com.
